Introduction
Welcome to the Wybot Robotic Pool Cleaner family! The Osprey 200 MAX is an environmentally friendly, rechargeable automatic cleaner designed to efficiently filter your pool water and remove debris without the need to replace the water. This manual provides essential information for the safe and effective operation of your new pool cleaner.
Key Features & Specifications
- Model: Osprey 200 MAX
- Power: Approx. 30W
- Working Cycle: Max. 100 minutes
- Cleaning Surface: Up to 861ft² / 80m²
- Filter Capability: Approx. 32gal/min (120L/min)
- Water Depth: Max. 8.2 ft / 2.5m
- IP Grade: IPX8
- Pool Water Temperature: 50°F-95°F / 10°C-35°C
Getting Started
Before use, please ensure the robotic pool cleaner is fully charged. Follow the assembly instructions carefully, including attaching the flipper and optional scrapers for enhanced suction. Refer to the product diagram for component identification.
Operation Guide
To operate the cleaner, first purge the air by submerging it in the pool. Once underwater, turn on the power. The cleaner will then automatically navigate and clean your pool floor. After cleaning, retrieve the robot using the provided hook or flipper and ensure it is powered off.
Maintenance & Care
Regular cleaning after each use is crucial for optimal performance. Open the lock buckles, remove the top cover, and rinse the filter screen with running water. Wipe the cleaner with a clean cloth and allow it to air dry. For long-term storage, charge the battery every six months.
Troubleshooting
Should you encounter any issues, please refer to the troubleshooting section in the full manual. For persistent problems or further assistance, contact Wybot Customer Service:
Email: support@wybotpool.com
Web: www.wybotpool.com
Facebook: @WybotPool
