Yeelight Motion Sensor Closet Light
Product Description
This document provides information about the Yeelight Motion Sensor Closet Light.
Key Components:
- [charging-indicator]: Indicates charging status.
- [on-off-button]: Button on the side for mode switching and brightness adjustment.
- [motion-sensor]: Detects motion for automatic illumination.
- [usb-c-port]: Port for charging the device.
- [function-indicator]: Provides status feedback (e.g., blue flashing for AUTO mode).
- [magnetic-area]: Area on the back for magnetic mounting.
- [lamp-surface]: The main body of the light.
A USB-C charging cable is included.
Note: Illustrations in this manual are for reference only.
Setup Instructions
Switching Modes
Press the [on-off-button] to cycle through ON, OFF, and AUTO modes.
- When switching to AUTO mode, the [function-indicator] flashes blue and turns off after 15 seconds.
- Press and hold the [on-off-button] for more than 3 seconds to adjust brightness.
Function Indicator Meaning (AUTO Mode)
In AUTO mode, the lamp automatically turns on when motion is detected in the dark. It turns off automatically after 20 seconds if no motion is detected.
Charging Indicator Functionalities
- The [charging-indicator] is red when the lamp is charging.
- The indicator turns off when charging is completed.
Note: Use a 5V charger. The lamp may not illuminate or the indicator may not function correctly if not connected to a power source.
Sensor Illustration
The sensor is designed to detect motion within a 120° sector. The front sensor range extends up to 4 meters, while the side sensor range is up to 2 meters. Performance can vary based on installation location, ambient temperature, human body shape, and motion speed.
Installation
- Attach the two included metal plates to the [magnetic-area] on the back of the lamp.
- Paste the lamp onto a smooth surface using the adhesive tape.
Notes:
- Ensure the sensor is oriented towards the area where motion is expected.
- Avoid placing any obstructions in front of the sensor.
Specifications
| Feature | Details |
|---|---|
| Product Name | Yeelight Motion Sensor Closet Light A20, A40, A60 |
| Model | YLCG002 / YLCG004 / YLCG006 |
| Dimensions | 20 x 4.0 x 0.9cm / 40 x 4.0 x 0.9cm / 60 x 4.0 x 0.9cm |
| Rated Power | 1.8W / 2.3W / 2.4W |
| Battery Capacity | 1100mAh / 1500mAh / 2200mAh |
| Battery Endurance | > 5 hours |
| Color Temperature | 2700K |
| Rated Input | 5V 0.5A |
| CRI | >80 |
| Luminous Flux | 45lm (YLCG002) / 90lm (YLCG004) / 135lm (YLCG006) |
| Charging Time | About 3-6 hours |
| Sensing Time | 4-6 months (based on 3 activations per day) |
| Operating Temperature | -10℃ to +25℃ |
| Operating Humidity | 0%-85%RH |
| Material | Aluminum alloy + ABS |
Safety Precautions
- Ensure correct voltage before use to prevent product damage and safety hazards.
- Install and use the product away from heat sources (e.g., heating vents, air conditioners) and direct sunlight.
- Do not cover the sensor. Clean the lamp with a soft cotton cloth and avoid corrosive solvents.
- This device is for indoor use only. Do not spray water on it or submerge it in water.
- Do not use this product as a toy for children's play.
- Do not disassemble the product, as the LED may cause eye damage.
- The device generates heat during operation; ensure proper ventilation.
- The light source should only be replaced by the manufacturer, its service agent, or a similarly qualified person.
[class-iii-luminaire]
Declaration of Conformity
QINGDAO YEELINK INFORMATION TECHNOLOGY CO., LTD. hereby declares that this equipment complies with applicable Directives, European Norms, and their amendments.
[ce-mark]
WEEE Disposal and Recycling
Products bearing the [weee-symbol] are waste electrical and electronic equipment (WEEE) and should not be mixed with general household waste. Dispose of this equipment at designated collection points for recycling. This helps protect human health and the environment. Contact local authorities for more information on collection points and procedures.
