LIVARNO home Pop-Up Beach Shelter

Introduction

Congratulations on the purchase of your new LIVARNO home Pop-Up Beach Shelter. This guide provides essential operation and safety notes to ensure you get the most out of your high-quality product. Please read all instructions carefully before first use and keep them in a safe place for future reference. Only use the product as intended and for the specified applications.

Description of Parts and Features

The beach shelter includes the following components:

• 1 x Pop-Up Beach Shelter
• 2 x Guy line
• 3 x Peg
• 4 x Carrying bag

Proper Use

This product is designed to provide protection against wind and sun. The shelter material is not waterproof for extended periods and should not be used in the rain. It is intended for personal, non-commercial use.

Safety Advice

General Safety:

• Keep all instructions and documentation safe. Pass them on if the product is given to a third party.
• CAUTION! RISK OF INJURY! Ensure all parts are undamaged and correctly assembled. Incorrect assembly can lead to injury. Damaged parts can affect safety and function.
• CAUTION! Never leave children unattended. This product is not a climbing frame or toy. Prevent children from climbing or leaning on the shelter, as it could become unstable and tip over, causing injury or damage.
• CAUTION! RISK OF INJURY! Never assemble the product in strong winds.
• Choose a flat and firm piece of ground for setup. Sandy surfaces reduce stability; ensure pegs can be firmly anchored.
• Do not force pegs into the ground. If necessary, use loops to extend guy lines and reposition pegs.
• Regularly check all connection points, guy lines, and peg security.
• Incorrect assembly order may damage the shelter; liability is excluded in such cases.
• It is not recommended to remove sewn labels.
• Be aware of local fire protection regulations.

Specific Warnings:

• WARNING! Do not use as a camping tent.
• WARNING! Do not have open fire inside or near the beach shelter.
• WARNING! Do not fully close the shelter while people are inside.

Weather and Climate Considerations:

• Do not erect the shelter too taut, as it needs to adapt to changing weather conditions to prevent damage.
• Zips are subject to wear and are not covered by the warranty.
• Do not use insect spray inside or on the shelter.
• Small seam leaks can be repaired with seam spray; the tent fabric can be treated with waterproofing spray.

Assembly and Folding

Assembly and disassembly should only be performed by a competent person.

Erecting the Product

ATTENTION: The poles are under tension and will snap into the product's natural shape. Be careful to avoid injury when tension is released. Throw the product into the air away from yourself.

Diagram Description (HG11013A/HG11013B):

• Setup (General): The shelter is designed to pop open. Poles are pre-tensioned.
• Erected Shelter (HG11013A/HG11013B): The shelter is shown fully erected with guy lines staked to the ground.

Folding the Product

Follow these steps carefully to fold the shelter:

1. Gather all loops in one hand. Start from the rear end to allow air to escape through the front entrance (see diagrams A-B).
2. Hold the four loops together in one hand and position the product upright (see diagram C).
3. Press the tip of the upper loop towards the ground and move it towards the center. Continue pressing the new loops down with one hand while the other hand holds the other four loops together (see diagrams D-E for HG11013A / diagram D for HG11013B).
4. Release the grip on the four loops and fold all loops into each other (see diagrams F-G for HG11013A / diagram E for HG11013B).
5. Store the folded product in the carrying bag (see diagram H for HG11013A / diagram F for HG11013B).

Cleaning

• CAUTION! Never wash the product in a washing machine.
• CAUTION! Never use petrol, solvents, or other cleaning agents, as this can damage the product.
• Condensation may form in synthetic products; air the shelter frequently to prevent this.
• For cleaning and stain removal, use only cleaning agents specifically designed for polyester products.
• Remove dirt with a soft sponge and clean water.
• Ensure all parts are thoroughly dry before repacking to prevent mould, bad odours, and discolouration.
• If zippers are stiff, spray with silicone spray.

Disposal

Packaging is made from recyclable materials. Dispose of them at local recycling facilities. Contact your local authorities for information on how to dispose of the product when it reaches the end of its life.

Warranty

This product is manufactured to strict quality guidelines. In case of material or manufacturing defects, you have legal rights against the seller. This warranty does not limit your legal rights.

• The warranty period is 3 years from the date of purchase. Keep your original sales receipt as proof of purchase.
• Report any pre-existing damage or defects immediately after unpacking.
• LIVARNO home will repair or replace the product free of charge within 3 years if a material or manufacturing defect occurs. The warranty period is not extended by repairs or replacements.
• This warranty is void if the product is damaged, misused, or improperly maintained.
• The warranty covers material and manufacturing defects. It does not cover wear-and-tear parts (e.g., batteries, hoses, cartridges) or damage to fragile parts (e.g., switches, glass).

Warranty Claim Procedure

To ensure quick processing:

• Keep your receipt and the item number (IAN 444580_2307) as proof of purchase.
• The item number can be found on the rating plate, an engraving, the title page of the manual, or a sticker on the product.
• For functional defects or other issues, contact the service department by phone or email.
• Send defective products postage-paid to the provided service address, including proof of purchase and a description of the defect and when it occurred.

Service Contact Information

Service Great Britain:

• Tel.: 08000569216
• E-Mail: owim@lidl.co.uk

Service Ireland:

• Tel.: 1800200736
• E-Mail: owim@lidl.ie

Service Northern Ireland:

• Tel.: 08000927852
• E-Mail: owim@lidl.ie

Service France:

• Tel.: 0800904879
• E-Mail: owim@lidl.fr

Service Belgium:

• Tel.: 080071011
• Tel. (Luxembourg): 80023970
• E-Mail: owim@lidl.be

Service Deutschland:

• Tel.: 08005435111
• E-Mail: owim@lidl.de

Service Österreich:

• Tel.: 0800292726
• E-Mail: owim@lidl.at

Service Schweiz:

• Tel.: 0800562153
• E-Mail: owim@lidl.ch

Service Nederland:

• Tel.: 08000225537
• E-Mail: owim@lidl.nl