LIVARNO home Textile Wardrobe

Introduction

Congratulations on the purchase of your new product. You have chosen a high-quality product. Familiarize yourself with the product before its first use. Read the following operating instructions and safety information carefully. Use the product only as described and for the intended applications. Keep these instructions in a safe place. Hand over all documents when passing the product on to third parties.

Intended Use

The item is not intended for commercial use. The item is designed for indoor use.

Scope of Delivery (Fig. A)

• 1 x Wardrobe, disassembled (Parts A - L)
• 1 x Set of mounting material (Parts M-Q)
• 1 x Assembly instructions

Technical Data

Safety Instructions

⚠ WARNING! LIFE AND ACCIDENT HAZARD FOR INFANTS AND CHILDREN! Never leave children unsupervised with packaging material and the product. There is a risk of suffocation from packaging material. Children often underestimate dangers. Always keep children away from the product. This product is not a toy.

⚠ Risk of Injury!

• Ensure the item's stability before use.
• Place the item on a level surface.
• The item must only be used under adult supervision, and no one should play with it.
• Before each use, check the item for damage or wear.
• Ensure the item is assembled correctly and according to these instructions. Incorrect assembly can lead to injuries and impair safety and function.
• Check if the wall is suitable for wall mounting the item. Unsuitable wall substrates can cause injuries.

Assembly

Important: Assembly of the item should be carried out by at least two people.

For assembly, you will need the following tools (not included): Phillips screwdriver, hammer, and a suitable drill.

Note: You have the option to mount the clothes rail on the left or right side. Decide on a side before assembly and build the item accordingly.

1. Assemble the item on a level surface as shown in figures B-H.
2. For safety reasons, the item must be wall-mounted (Fig. I).

Note: Do not place any items on top of the wardrobe.

Diagram Descriptions

Fig. A (Scope of Delivery): Illustrates the disassembled wardrobe parts (A-L) and the mounting hardware (M-Q), showing quantities and some dimensions.

Fig. B: Shows the initial frame assembly using parts A, B, C, D, G, H, M, with close-ups of connections.

Fig. C: Depicts the assembly of shelves (E) into the frame.

Fig. D: Illustrates the assembly of side panels and the frame structure.

Fig. E: Continues the frame assembly with parts A, C, D, M, O.

Fig. F: Shows the main structure assembly, including the clothes rail (J) and attaching back panels (F, B, L, C, N), with close-ups of connectors.

Fig. G: Demonstrates how to put the fabric cover onto the assembled frame.

Fig. H: Shows how to tie a strap, likely for securing the cover or the unit.

Fig. I: Illustrates wall mounting using screws (P) and wall plugs (Q) through part J/K.

Fig. J: Displays the assembled wardrobe with load limits indicated: Max. 4kg on the clothes rail and Max. 3kg on each shelf.

Fig. K: Shows the fully assembled wardrobe with a cross symbol, indicating caution regarding misuse or overloading.

Storage, Cleaning

• When not in use, always store the item in a dry, clean place at room temperature.
• Clean only with water and then dry with a cleaning cloth.
• IMPORTANT! Never clean with aggressive cleaning agents.

Disposal

The packaging consists of ecological materials that can be disposed of at local recycling centers. Inquire with your local municipality about disposal options for used products.

Warranty

The product was manufactured according to strict quality guidelines and carefully checked before delivery. In case of material or manufacturing defects, you have legal rights against the seller. Your legal rights are in no way limited by our warranty below.

The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original proof of purchase in a safe place, as this document is required as proof of purchase.

Any damage or defects present at the time of purchase must be reported immediately after unpacking the product.

If the product shows a material or manufacturing defect within 3 years of the purchase date, it will be repaired or replaced free of charge at our discretion. The warranty period is not extended by an accepted warranty claim. This also applies to replaced and repaired parts.

This warranty is void if the product has been damaged, misused, or improperly maintained.

The warranty covers material and manufacturing defects. It does not cover product parts subject to normal wear and tear (e.g., batteries, rechargeable batteries, hoses, ink cartridges), nor damage to fragile parts (e.g., switches, glass parts, screens, accessories) or damage from transport or other incidents.

Warranty Claims

To ensure prompt processing of your request, please follow the instructions below:

For all inquiries, please keep your receipt and the article number (IAN 478995_2410) as proof of purchase.

The article number can be found on the rating plate, an engraving, the title page of your manual (bottom left), or on a sticker on the back or underside of the product.

In case of malfunctions or defects, first contact the service department listed below by phone or email. You can then send the defective product postage-paid to the provided service address, along with the proof of purchase (receipt) and a written description of the defect, including when it occurred.

Service

Service Deutschland
Tel.: 0800 5435 111
E-Mail: owim@lidl.de

Service Österreich
Tel.: 0800 292726
E-Mail: owim@lidl.at

Service Schweiz
Tel.: 0800562153
E-Mail: owim@lidl.ch