LIVARNO home Pop-Up Beach Shelter
Model No.: HG11013A/HG11013B | Version: 01/2024 | IAN: 444580_2307
Introduction
Congratulations on the purchase of your new product. You have chosen a high-quality product. Familiarise yourself with the product before using it for the first time. Please carefully refer to the operating instructions and safety advice below. Use the product only as instructed and for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, ensure all documentation is included.
Proper Use
This product is intended for use as protection against the wind and sun. The material of the beach shelter is not watertight over a prolonged period. It should not therefore be used in the rain. The product is not intended for commercial use.
Description of Parts and Features
- 1. Pop-Up Beach Shelter
- 2. Guy line
- 3. Peg
- 4. Carrying bag
Safety Advice
KEEP INSTRUCTIONS IN A SAFE PLACE. SUBMIT ALL DOCUMENTS TO A THIRD PARTY IF DISTRIBUTING THE PRODUCT.
CAUTION! RISK OF INJURY! Ensure all parts are undamaged and have been assembled appropriately. Risk of injury exists if assembled incorrectly. Damaged parts can affect safety and function.
CAUTION! Do not leave children unattended. The product is not a climbing frame or toy. Ensure that nobody climbs or leans on the product, particularly children. The product could become imbalanced and tip up, potentially resulting in injury and/or damage.
CAUTION! RISK OF INJURY! Never assemble the product in strong wind conditions.
Select a piece of land that is as flat and firm as possible to erect your beach shelter. Sandy surfaces reduce stability. Ensure the surface provides a firm hold for the pegs. Never knock pegs into the ground with force. If necessary, extend guy lines with a loop and position the peg elsewhere. Regularly check the integrity of all connection points and guy lines, and the firmness of pegs in the ground. Incorrect assembly order may damage the shelter; all liability is excluded in such cases. Do not remove sewn labels. Familiarise yourself with local fire protection regulations.
Weather and Climate Considerations
Ensure the beach shelter is not erected too taut, as it may not adapt to changing weather conditions and could be damaged. Zips are wear parts and not covered by warranty. Do not use insect spray in or on the shelter. Small leaks on seams can be repaired with seam spray; impregnation spray can be used for the shelter skin.
Assembly
Ensure assembly/disassembly is performed only by a competent person.
Erecting the Product
ATTENTION: Poles are under tension and snap into the product's natural shape. Be careful that the release of tension does not cause injury. Throw the product away from you into the air.
Folding the Product
- Gather all loops in one hand. Start at the rear end to allow air to escape completely through the front entrance (see Fig. A-B).
- Hold the four loops in one hand and place the product upright (see Fig. C).
- Press the tip of the upper loop towards the ground and move it towards the middle. Continue pressing new loops down with one hand while the other hand holds the other four loops together (see Fig. D-E for HG11013A / Fig. D for HG11013B).
- Release the grip of the hand holding the 4 loops and fold all loops into each other (see Fig. F-G for HG11013A / Fig. E for HG11013B).
- The product can now be stored in its carrying bag 4 (see Fig. H for HG11013A / Fig. F for HG11013B).
Cleaning
CAUTION! Never wash the product in a washing machine.
CAUTION! Never use petrol, solvents, or other cleaning agents, as this may damage the product.
Condensation can form in synthetic products; air the tent frequently to counteract this. For cleaning and stain removal, use only a cleaning agent specifically for polyester products. Remove dirt with a soft sponge and clean water. Allow all parts to dry thoroughly before repacking to prevent mould, bad odours, and discolouration. If the zipper sticks, spray it with silicone spray.
Disposal
The packaging is made of recyclable materials and can be disposed of at local recycling facilities. Contact your local authority for disposal options for the used product.
The product, accessories, and packaging materials are recyclable and subject to extended producer responsibility. Dispose of them separately according to sorting information for better waste management. The Triman logo applies only to France.
Warranty
The product is manufactured to strict quality guidelines and meticulously checked before delivery. In case of material or manufacturing defects, you have legal rights against the seller. Our warranty does not limit these legal rights. The warranty for this product is 3 years from the date of purchase. Keep the original receipt as proof of purchase. Any damage or defects present at the time of purchase must be reported immediately after unpacking. If a material or manufacturing defect occurs within 3 years of purchase, it will be repaired or replaced free of charge at our discretion. The warranty period is not extended by a warranty claim. This also applies to replaced or repaired parts. The warranty is void if the product is damaged, used improperly, or not maintained correctly.
The warranty covers material and manufacturing defects. It does not cover parts subject to normal wear and tear (e.g., batteries, hoses, ink cartridges) or damage to fragile parts (e.g., switches, glass parts).
Warranty Claim Procedure
For quick processing, please follow these instructions: Keep your receipt and the item number (IAN 444580_2307) as proof of purchase. The item number is on the rating plate, engraving, instruction title page, or a sticker on the product. For functional defects or other issues, contact the service department by phone or email. Defective products can be sent postage-free to the provided service address, along with proof of purchase and a description of the defect and when it occurred.
Service
Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1800 200736
E-Mail: owim@lidl.ie
