LIVARNO home Floating Water Lounger
Operation and safety notes
Introduction
Congratulations on the purchase of your new LIVARNO home Floating Water Lounger. This document provides essential operating instructions and safety advice. Please read it carefully before first use and keep it in a safe place for future reference. Ensure all documentation is passed on if the product is given to a third party.
Important Safety Warnings
DEFIANCE AND VIOLATION OF THIS MANUAL CAN RESULT IN HAZARDS, SUCH AS PERSONAL INJURY AND DEATH, E.G. FROM DROWNING!
WARNING! RISK OF FATAL INJURY AND RISK OF ACCIDENTS FOR INFANTS AND CHILDREN! Never leave children unattended with packaging material or the product. There is a risk of suffocation from packaging materials and a risk of fatal injury by strangulation. Children often underestimate dangers.
WARNING! DANGER TO LIFE THROUGH DROWNING! There is a danger of drowning. Use swimming aids if necessary. Never stay in the water alone. Make sure that at least one competent person is present. For swimmers only!
WARNING! DANGER TO LIFE! This product is not suitable for use as a floatation aid. A person who slips off could drown quickly, even in shallow water.
WARNING! DANGER TO LIFE! Never use this product in deep water. Use exclusively in shallow areas where the user can sit on the bottom and keep their head clearly above the water's surface.
CAUTION! RISK OF INJURY! Ensure all parts are undamaged. Damaged parts can affect safety and function. Use only for its intended purpose.
Do not overinflate the product, as it may burst. Only use the product if you are familiar with the safety information. Do not exceed the maximum load capacity (100 kg). Do not use if visual damage is present or suspected, or if air is escaping.
CAUTION! RISK OF POISONING AND DAMAGE TO PROPERTY! Keep away from fire and heat sources. Do not use on hard or stony ground, or near pointed objects, as this may cause damage.
CAUTION! Air chambers may be pressed underwater when entering the lounger, and uneven loading can cause it to tip over. Keep the repair patch 3 out of reach of children.
Avoid sunscreen and skin care products containing alcohol, as they can dissolve the product's color coating, leading to discoloration on skin, clothing, or other items.
Check the product for damage or wear before each use. Use only when in good working order.
Pictograms
Observe the pictograms applied to the product before use. Failure to do so could result in injury or damage.
- ! Mandatory action sign
- ?? Swimmers Only!
- 100% ➕ 1 ➕ 2 Fully inflate all air chambers in the indicated order.
- 1 ? 0 ? Numbers of users (adults/children).
- ? Read instructions first.
- ⚖️ 100 kg Max. load capacity.
- ✅ ❌ Device requires balancing.
- ? Pool use only.
- ? General prohibition sign.
- 0-14 ? Not for children 14 years of age and below.
- ⚠️ General warning sign.
- ? No protection against drowning.
- 0.43 psi (0.03 bar) Design working pressure.
Operation
Note: Before first use, an adult should check the product for holes, porous spots, or leaky seams. It is recommended to inflate the product and leave it for a day, and to air out new products outdoors for a few days.
Letting in air
CAUTION! Inflatable plastic products are sensitive to cold and heat. Do not use below 15°C or above 40°C, as this may damage the product.
Note: Inflation should be done by an adult. Do not overinflate. Never use a compressor. Stop pumping when resistance increases and seams stretch, or the material may tear. Use only manual pumps or pumps designed for inflatable plastic products.
IMPORTANT! Air temperature and weather conditions affect air pressure. In cold weather, air contracts, reducing pressure (add air). In hot weather, air expands (release air to prevent overfilling).
- First, unroll the product and check for holes, tears, or other damage.
- Open the valves (2). Inflate all air chambers until taut. Close valve caps and press valves (2) down lightly for each chamber (see Fig. A).
- Ensure chambers are filled equally and sequentially.
Letting air out
Pull out the valves (2) and lightly press the valve stems to release air.
Note: Ensure the product is completely dry before folding to prevent mould, bad odours, and discoloration.
Maintenance
The product must be checked for damage before each use.
Cleaning and care
- Use a slightly damp, lint-free cloth for cleaning.
- Never use corrosive or scouring detergents.
Storage instruction
- Ensure the product is completely dry inside and out before storing for extended periods to prevent mildew and mould.
- Store in a dark, dry place, out of reach of children. The ideal storage temperature is 10-20°C.
- Ensure the product does not come into contact with sharp objects during storage.
Repairing the product
Note: Minor damage can be repaired using the supplied repair patch (3). For larger damage, consult a specialist repair shop.
- Completely deflate the product (see "Letting air out" section).
- Cut the repair patch (3) to suit the size of the hole, ensuring it is larger than the hole and overlaps the edges.
- Round off the sides of the repair patch (3) and peel off the protective foil (see Fig. B).
- Place the patch on the hole and press firmly. A heavy object can be placed on the patch if necessary.
- Wait 24 hours before re-inflating the product.
Disposal
The packaging is made of environmentally friendly materials and can be disposed of at local recycling facilities. Contact your local refuse disposal authority for details on how to dispose of the worn-out product.
Warranty
The product is manufactured to strict quality guidelines. Your legal rights against the retailer are not limited by this warranty.
The warranty is 3 years from the date of purchase. Keep the original sales receipt as proof of purchase. Report any damage or defects present at the time of purchase immediately after unpacking.
If the product shows material or manufacturing defects within 3 years, LIVARNO home will repair or replace it at its choice, free of charge. The warranty period is not extended by claims. This also applies to replaced or repaired parts.
This warranty is void if the product is damaged, misused, or improperly maintained. It covers material and manufacturing defects but not normal wear and tear (e.g., batteries, tubes) or damage to fragile parts.
Warranty claim procedure
For quick processing, please have your receipt and item number (IAN 461195_2307) ready. The item number can be found on the product's rating plate, engraving, title page, or sticker.
For functional defects or other issues, contact the service department by telephone or email. Defective products can be sent postage-free to the provided service address, along with proof of purchase and a description of the defect.
Service
Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
