COOSPO H808S User Manual

Standard Accessories

The following accessories are included with your COOSPO H808S:

• Heart Rate Monitor x 1 (CR2032 battery installed)
• Chest Strap x 1
• User Manual x 1

Product Introduction

The H808S transmits real-time heart rate data via Bluetooth or ANT+ to a receiving device, sports, and health app. This helps you manage your exercise intensity scientifically. This user manual is provided to help you use the product better and should be kept for reference.

Note: This product is intended for sports purposes only and is not a substitute for any medical device.

Function and Operation

Wearing the Heart Rate Monitor:

1. Moisten the electrode areas of the chest strap.
2. Attach the heart rate Monitor to the chest strap, ensuring the 'L' marking is towards your left side.
3. Adjust the length of the chest strap to fasten it tightly but comfortably against your body. Ensure the moistened electrode areas are firmly against your skin and the Monitor is positioned centrally and upright.
4. When two "beep" sounds are heard and the LED flashes green, the heart rate sensor is worn correctly, and a heart rate signal has been detected.

Connect to the App:

1. Turn on Bluetooth: Navigate to your device's settings and toggle Bluetooth to the ON position.
2. Start the App and connect with the device within the app.
3. When the device is pairing with the app via Bluetooth, the blue light will start to flash.
4. When the heart rate Monitor is removed, a "beep" will be heard, indicating the product has stopped working.

Connecting with ANT+ Watch:

1. Refer to the 'Wearing the Heart Rate Monitor' section for correct usage.
2. Find and add the H808S in the ANT+ device list on your watch.
3. Follow the prompts on the watch to start training and view your real-time heart rate data on the display.

Maintenance

The H808S is a high-tech electronic device. Following the product's maintenance instructions will ensure its stability and prolong its service life.

1. Heart Rate Monitor: Detach the connector from the strap after each use and dry the connector with a soft towel. Do not use cleaning chemicals.
2. Chest Strap: Rinse the strap under running water and hang it to dry after each use. Cleaning the strap in a washing machine or dryer is strongly prohibited.

Important Notes:

• Never use cleaning chemicals, as they may cause rapid aging of the strap and shorten its service life.
• Do not stretch the strap or bend the electrode areas sharply.
• Do not store the heart rate Monitor in a wet or gas-tight environment to prevent snap oxidation. Store it in a cool, dry environment.

Battery Replacement

If the device cannot be detected, consider replacing the battery.

1. Use a coin to clip the groove, rotate it in the OPEN direction, and open the battery door.
2. Remove the old battery and dispose of it properly in accordance with local environmental regulations. [Recycle symbol]
3. Place the new battery in the battery bin with the positive (+) side up. Rotate the battery door in the reverse direction of OPEN using a coin until it is securely closed.

Caution: To avoid danger, batteries should be kept away from children.

Specifications

Applicable Smart Phones

• iOS 7.0 or above, iPhone 4s model or above [Apple logo]
• Android 4.3 or above with Bluetooth 4.0 [Android logo]

Heartool APP Instruction

1. Please search for "heartool" in Google Play or the App Store and install the app. [App Store logo] [Google Play logo]
2. Bind Your Device: Open the Heartool app and register. Power on the H808S. Go to "Setting-Device" and click "H808S" in the Bluetooth list to connect.
3. Max Heart Rate Alert Setting: Go to "Setting-Heart rate zone & alarm" to set your preferences.

Compatible Apps

CoospoRide, Wahoo Fitness, Zwift, Openrider, Runkeeper, Endomondo, Nike+ Run Club, Sports Tracker, Polar Beat, Apple Health, or other apps with heart rate display features.

Note: When using Nike+ Run Club, refer to the steps for displaying heart rate data in the app's running settings.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and.
2. This device must accept any interference received, including interference that may cause undesired operation.

Safety and Disposal Information

[Waste electrical products symbol] Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information.

[Warning symbol] [Electrical hazard symbol]

• Do not open or modify the product.
• Do not disassemble or attempt to service this product.
• This product is safe under normal and reasonably foreseeable operating conditions.
• If the product is operating improperly, contact COOSPO support.
• Product must be returned to the manufacturer for any service or repair.