Magcubic HY310 Smart Projector

Attention

Please read this manual carefully before use and keep it for future reference.

• The projector is not dustproof or waterproof.
• To reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
• Please use the original power adapter. The projector should work under specified rated power supply.
• When the projector is working, please do not look directly into the lens; the strong light may flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
• Do not cover the vents of the projector. Overheating will reduce the life of the projector and cause danger.
• Regularly clean projector vents, as dust may cause cooling malfunction.
• Do not use the projector in greasy, damp, dusty, or smoky environments. Oil or chemicals will cause malfunction.
• Please handle with care during daily use.
• Please cut off the power if the projector is out of use for a long time.
• Non-professionals are forbidden to disassemble the projector for testing and maintenance.

Structure Description

The projector features a lens, an air inlet for cooling, a speaker for audio output, an ON/OFF button, a USB port for connectivity, and a vent for heat dissipation.

Note: This manual is for reference only. It is subject to change without prior notice. Magcubic reserves the right of final interpretation.

Air Remote

The remote control includes the following buttons:

• ON/OFF [Power]
• MUTE [Mute]
• ROTATE [Rotate]
• DIRECTIONS [Directional Pad: Up, Down, Left, Right]
• OK [OK]
• MENU [Menu]
• VOL+/- [Volume Up/Down]
• HOME [Home]
• RETURN [Back]
• AIR [Air]
• SWITCH TO MOUSE CONTROL [Mouse Mode]
• VOICE INPUT [Voice Input]
• ELECTRONIC FOCUS [Focus]

Remote Controller Pairing

To connect the remote control, please keep the distance between the remote control and the projector within 20cm. Press the "left and right buttons" of the remote control.

Note: The matching interface of the remote control will flash. Press the "Voice input" button to bring up the matching guide.

Calibration of the flying squirrel micro-drift:

After the remote control is connected, simultaneously press and hold the "OK" and "HOME" buttons on the remote control for 2 seconds. The indicator light will stay on. Then, place the remote control flat on the desktop. After keeping it still for 5 seconds, the light will go off, and the flying squirrel will be successfully calibrated.

App Store

In the App Store, applications can be installed with one click and used directly after installation. Magcubic offers a selection of applications, enabling users to obtain and use them easily and conveniently.

Projection Setting

Navigate to Settings > Projector setting to access various projection and display options.

Available settings include:

• Projection mode
• Display settings
• Installation mode
• Digital scaling
• Auto Trapezoidal Correction
• Auto Focus
• Manual trapezoidal

Networking Setting

Navigate to Settings > Networking Setting > WIFI setting. Turn WIFI "ON", select the desired WIFI ID, and input the password to connect to the internet.

Language Setting

Navigate to Settings > Language Setting to set the system language and select the input method.

Date And Time Setting

Navigate to Settings > Date And Time Setting to configure the Date, Time, Time zone, and whether to use the 24-hour format.

Other Setting

Navigate to Settings > Other Setting for additional options:

• Button sound
• Screen saver (set time for the projection to enter screensaver mode; can be released by pressing the power button)
• Timed shutdown
• Restore factory settings

System Information

Navigate to Settings > System information to view details such as UI version, Resolution, Running memory, and Storage space.

Wireless Screen

Ensure that Android devices (phone, pad, etc.) are on the same local wireless LAN as the projector.

Operations on Devices: From the Home Screen, navigate to My Apps > ScreenCast > Open ScreenCast service. Turn on the phone mirroring connection.

Supports screen mirroring via:

• Miracast
• AirPlay

Safety Instructions

Please pay attention to important information related to the operation and maintenance of the projector. Reading this information carefully will help avoid problems and increase the projector's lifespan.

• Consult qualified personnel for installation and repair services. Do not use damaged wires, accessories, or other peripherals.
• The projector should be kept away from flammable, explosive materials, and strong electromagnetic interference sources (e.g., large radar stations, power stations, substations). Avoid strong ambient light, including direct sunlight.
• Do not cover projector vents to prevent overheating.
• Please use the original power adapter.
• Ensure adequate ventilation and that vents are not covered.
• When the projector is working, do not look directly into the lens, as the strong light may cause eye discomfort.
• Do not bend or drag the power cord.
• Do not place the power cord under the projector or any heavy objects.
• Do not cover the power cord with soft materials.
• Do not heat the power cord.
• Avoid touching the power adapter with wet hands.

Disclaimer

This manual provides general instructions. The pictures and functions described are subject to the actual product. Magcubic is dedicated to improving product performance and reserves the right to modify product functions and interfaces without prior notice.

Please handle your device properly. Magcubic is not responsible for any loss caused by incorrect software/hardware operation, unauthorized repairs, or other reasons. Magcubic is not responsible for any third-party claims.

This manual has been carefully checked by professional engineers; please understand any inevitable omissions.

Support

Thank you for purchasing! For assistance, please send an email to support@magcubic.com with your item name for a better experience, prompt reply, and further assistance.