Magcubic HY310 Smart Projector Quick Installation Guide

Introduction and Product Overview

This guide provides essential information for setting up and operating the Magcubic HY310 Smart Projector. Please read this manual carefully before use and keep it for future reference.

Diagram: Smart Projector Components

A diagram shows the smart projector from the side, highlighting the Lens, Air inlet, Speaker, ON/OFF button, USB port, and Vent.

Model: HY310

Important Safety Information

Attention:

The projector is not dustproof or waterproof.
To reduce the risk of fire and electric shock, do not expose the projector to rain or moisture.
Please use the original power adapter. The projector should operate under specified rated power supply.
When the projector is working, do not look directly into the lens. The strong light can cause temporary discomfort. Children should use the projector under adult supervision.
Do not cover the projector vents. Overheating can reduce the projector's lifespan and cause safety hazards.
Regularly clean projector vents to prevent cooling malfunctions due to dust accumulation.
Do not use the projector in greasy, damp, dusty, or smoky environments. Oil or chemicals can cause malfunctions.
Handle the projector with care during daily use.
Disconnect the power if the projector is not in use for an extended period.
Non-professionals are forbidden to disassemble the projector for testing or maintenance.
Keep the projector away from flammable, explosive materials, and strong electromagnetic interference sources.
Avoid strong ambient light, such as direct sunlight.
Do not bend or drag the power cord. Do not place heavy objects on the power cord.
Do not cover the power cord with soft materials or heat it.
Avoid touching the power adapter with wet hands.

Remote Control and Operation

Air Remote:

The remote control features the following buttons:

ON/OFF [power]
MUTE [mute]
ROTATE [rotate]
DIRECTIONS (Up, Down, Left, Right) [up-arrow], [down-arrow], [left-arrow], [right-arrow]
OK [ok]
RETURN [back]
MENU [menu]
VOL+/- [volume-up], [volume-down]
ELECTRONIC FOCUS [focus]
HOME [home]
SWITCH TO MOUSE CONTROL [mouse]

Remote Controller Pairing:

To pair the remote control, press the "Voice input" button to bring up the matching guide.

Calibration of the flying squirrel micro-drift:

After the remote control is connected, simultaneously press and hold the "OK" and "HOME" buttons on the remote control for 2 seconds. The indicator light will stay on. Place the remote control flat on a desktop and keep it still for 5 seconds. The light will go off, indicating successful calibration.

System Setup and Settings

Boot Interface: The projector displays options such as 'My Apps', 'Settings', 'Projection settings', 'Display settings', 'Installation mode', 'Digital scaling', 'Auto Trapezoidal Correction', 'Auto Focus', and 'Manual trapezoidal'.

App Store: Applications can be installed with one click and used directly after installation.

Projection Settings: Access setup for projection mode, Display settings, Installation mode, Digital scaling, Auto Trapezoidal Correction, Auto Focus, and Manual trapezoidal adjustments.

Example setting: 'Rear front projection'.

Networking Setting: Navigate to 'Networking Setting' > 'WIFI setting'. Turn WIFI 'ON', select the desired WIFI ID, and input the password to connect to the internet.

Language Setting: Go to 'Settings' > 'Language Setting' to set the display language and select the input method.

Example: 'English (United Kingdom) - Android Keyboard'.

Date and Time Setting: Access 'Date and Time Setting' to configure the date, time, timezone, and choose between 12-hour or 24-hour format.

Example: 'GMT-06:00, Central Stand.', '13:00'.

Other Settings: Includes options for 'Button sound', 'Screen saver', 'Timed shutdown', and 'Restore factory settings'.

Screen Saver: Set the screen saver time. The projector enters screensaver mode after a set period of inactivity. Pressing the power button releases screensaver mode.

System Information: View 'UI version', 'Resolution', 'Running memory', and 'Storage space'.

Wireless Screen Mirroring

Ensure your Android devices (phone, tablet, etc.) are on the same local wireless LAN as the projector.

Operations on Devices:

From the Home Screen, navigate to 'My Apps' > 'ScreenCast' > 'Open ScreenCast service'. Turn on the phone mirroring connection.

Supported protocols include 'Miracast', 'AirPlay', and wired connections.

Disclaimer

This manual contains general instructions. Product images and functions are subject to the actual product. Magcubic is committed to product improvement and reserves the right to modify functions and interfaces without prior notice.

Magcubic is not responsible for any loss caused by incorrect software/hardware operation, unauthorized repairs, or other reasons. Claims from third parties are also not the responsibility of Magcubic.

While this manual has been carefully checked, some omissions may be unavoidable.

Contact and Support

Thank you for purchasing! For assistance, please email support@magcubic.com with your item name for prompt reply and further assistance.

	Magcubic HY310 Smart Projector: Quick Installation Guide and Features Comprehensive guide to setting up and using the Magcubic HY310 Smart Projector, covering remote pairing, settings, wireless screen mirroring, and safety instructions.
	MAGCUBIC HY300X Smart Projector Quick Installation Guide Comprehensive guide to setting up and operating the MAGCUBIC HY300X Smart Projector, covering installation, remote functions, various settings (projection, network, language, date/time), wireless screen mirroring, regulatory information, and safety precautions.
	Magcubic Smart Projector Quick Installation Guide A comprehensive guide for the Magcubic Smart Projector, detailing setup, features, connectivity options like Wi-Fi, Bluetooth, Miracast, and Airplay, along with essential safety information and support contact.
	Magcubic HY300 Intelligent Projector User Manual and Guide Comprehensive user manual for the Magcubic HY300 intelligent projector, covering setup, features, settings, safety instructions, and troubleshooting. Learn how to connect, use wireless screen mirroring, and navigate the projector's interface.
	Magcubic Smart Projector Quick Installation Guide - Setup and Operation Comprehensive guide for setting up and operating the Magcubic Smart Projector, covering connectivity, settings, safety, and troubleshooting. Learn how to connect to Wi-Fi, Bluetooth, use screen mirroring, and adjust projection settings.
	Magcubic Portable Projector User Manual - Setup and Operation Guide Comprehensive user manual for the Magcubic portable projector, covering setup, operation, connectivity options (Wi-Fi, Bluetooth, HDMI, Screen Mirroring), settings, and safety instructions.
	Magcubic HY300pro+ Smart Projector Quick Installation Guide Concise guide to installing and setting up the Magcubic HY300pro+ smart projector, covering safety, device components, remote functions, settings, and connectivity.
	Magcubic HY310 LCD LED Projector with Android TV - Technical Specifications Detailed specifications for the Magcubic HY310 LCD LED projector, featuring HDTV 1920x1080 resolution, 10000:1 contrast, Android TV, Wi-Fi, and Bluetooth connectivity. Includes information on brightness, light source, connections, and dimensions.