Smart Projector HY300pro+

⚠ Important Safety Information

Please read this manual carefully before use and keep it for future reference.

• The projector is non dustproof or waterproof.
• To reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
• Please use the original power adapter. The projector should work under specified rated power supply.
• When the projector is working, please do not look directly into the lens; the strong light will flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
• Do not cover the vents of projector. Heating will reduce the life of projector and cause danger.
• Regularly clean projector vents, or dust may cause cooling malfunction.
• Do not use the projector in greasy, damp, dusty or smoky environment. Oil or chemicals will cause malfunction.
• Please handle with care during daily use.
• Please cut off the power if the projector is out of use for long time.
• Non-professionals are forbidden to disassemble the projector for testing and maintenance.

Structure Description

This manual is for reference only. It is subject to change without prior notice. Hotack reserves the right of final interpretation.

Device Components

• USB ON/OFF [USB ON/OFF]
• Vent Speaker [Vent Speaker]
• POWER [POWER]
• Focus Wheel [Focus Wheel]
• Lens [Lens]
• Air inlet [Air inlet]
• ROTATE [ROTATE]

Remote Component and Functions

• ON/OFF [ON/OFF]
• Miracast [Miracast]
• ScreenCast [ScreenCast]
• MUTE [MUTE]
• Switch to mouse control [Mouse Control]
• RETURN [RETURN]
• MENU [MENU]
• VOL+/- [VOL+/-]
• OK [OK]

App Store

In the App Store, applications can be installed with one click, and they can be used directly after installation. Magcubic also brings applications to the market, enabling users to obtain and use them easily and conveniently.

Settings

Access settings for Networking, Bluetooth, Language, Other Settings, Projection, Audio, and Date & Time.

Networking Setting

Navigate to Settings -> Networking Setting -> WIFI setting. Turn WIFI "ON", select the objective WIFI ID, and input the password to connect to the internet.

BT Setting

Navigate to Settings -> BT setting. Turn BT "ON", click "Refresh Device", and choose the objective device to pair.

Language Setting

Navigate to Settings -> Language Setting to configure the language and select the input method.

Other Setting

Navigate to Settings -> Other Setting to access Application settings, Factory Reset settings, and Developer options.

Projection Setting

Navigate to Settings -> Projector setting to configure Screen Zoom, projection mode, keystone correction, Brightness And Color, and Screen Saver.

Audio Setting

Navigate to Settings -> Audio setting to adjust the volume.

Screen Saver

Navigate to Settings -> Projector setting -> Screen Saver. Set the screen saver time. The projection will enter screensaver mode at the set time without any operation or playback. The screensaver mode can be released by pressing the power button.

Date And Time Setting

Navigate to Settings -> Date And Time Setting to configure timezone, time format, date format, date, and time.

Signal and Wireless Screen

Signal

After connecting the projector to another output device, select HDMI or Audio/Video input.

Wireless Screen

Ensure Android devices (phone, tablet, etc.) are on the same local wireless LAN as the projector. Operations on Devices: Home Screen -> Applications -> ScreenCast -> Open ScreenCast service -> Turn on phone mirroring -> Connection.

Extended Safety Instructions

• Please pay attention to important information related to the operation and maintenance of the projector. Read this information carefully to avoid problems. Following safety instructions will increase the life of the projector.
• Please consult qualified personnel for installation and repair services, and do not use damaged wires, accessories, or other peripherals.
• The projector should be kept away from flammable, explosive, strong electromagnetic interference (large radar stations, power stations, substations), etc. Avoid strong ambient light (direct sunlight).
• Do not cover projector vents.
• Please use the original power adapter.
• Keep adequate ventilation and ensure vents are not covered to avoid projector overheating.
• When the projector is working, do not look directly into the lens; the strong light may flash your eyes and cause slight pain.
• Do not bend or drag the power cord.
• Do not place the power cord under the projector or any heavy objects.
• Do not cover the power cord with other soft materials.
• Do not heat the power cord.
• Avoid touching the power adapter with wet hands.

Disclaimer

This manual contains general instructions. The pictures and functions in this manual are subject to the actual product. Magcubic is devoted to improving product performance and reserves the right to modify product functions and interfaces described in this manual without notice.

Please keep your device properly. Magcubic is not responsible for any loss caused by incorrect operation of software/hardware, repairs, or any other reasons. Magcubic is not responsible for any loss from third-party claims.

This manual has been carefully checked by professional engineers; please understand any inevitable omissions.

Attention

Please do not look directly into the lens when projecting to prevent strong light from harming your eyes. Children should use the projector under the supervision of adults.

Thanks for purchasing! Need help? Please send an email with the item name to the Magcubic Brand Support Team at support@magcubic.com for a better experience, prompt reply, and further assistance.