Magcubic HY300 Smart Projector
Quick Installation Guide
Attention and Safety Precautions
Please read this manual carefully before use and keep it for future reference.
- The projector is not dustproof or waterproof.
- To reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
- Please use the original power adapter. The projector should work under specified rated power supply.
- When the projector is working, please do not look directly into the lens; the strong light can flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
- Do not cover the vents of the projector. Heating will reduce the life of the projector and cause danger.
- Regularly clean projector vents, or dust may cause cooling malfunction.
- Do not use the projector in greasy, damp, dusty, or smoky environments. Oil or chemicals will cause malfunction.
- Please handle with care during daily use.
- Please cut off the power if the projector is out of use for a long time.
- Non-professionals are forbidden to disassemble the projector for testing and maintenance.
Disclaimer: This manual provides general instructions. Pictures and functions are subject to the actual product. Magcubic is devoted to improving product performance and reserves the right to modify product functions and interfaces without notice. Magcubic is not responsible for any loss caused by wrong operation of software/hardware, repair, or any other reasons. Magcubic is not responsible for any loss of any third-party claims.
Contact: For assistance, please email magcubic@163.com with the item name for a better experience and prompt reply.
Structure Description
The projector features:
- Lens: The projection lens.
- Vents: Air inlets and outlets for cooling.
- Ports: Headset jack, HDMI, USB.
- Focus Wheel: For adjusting image focus.
Remote Component and Functions
The remote control allows for navigation and operation. Key functions include:
- ON/OFF: Powers the projector on or off.
- DIRECTIONS (Up, Down, Left, Right): Navigate menus.
- OK: Select an option.
- RETURN: Go back to the previous screen.
- POWER: Power button.
- VOL+/-: Adjust volume.
- MUTE: Mute audio.
- MENU: Access the main menu.
- HOME: Return to the home screen.
Switching Between Applications
Navigate to "My apps" to view installed programs. Click a program icon to switch to it.
Settings Menu Overview
Access the settings menu to configure various aspects of the projector:
- Networking Setting: Connect to Wi-Fi networks.
- Bluetooth Setting: Pair with Bluetooth devices.
- Language Setting: Select the display language and input method.
- Other Setting: Access Application settings, Factory Reset, and Developer options.
- Projection Setting: Adjust projection mode and keystone correction.
- Audio Setting: Adjust volume levels.
- Date And Time Setting: Set timezone, time format, date format, date, and time.
- About device: View device information.
Networking Setting Example:
To connect to Wi-Fi:
- Go to Settings > Networking Setting.
- Turn Wi-Fi ON.
- Select your desired Wi-Fi ID and input the password to connect to the internet.
Bluetooth Setting Example:
To pair a Bluetooth device:
- Go to Settings > Bluetooth setting.
- Turn Bluetooth ON.
- Click "Refresh Device" and choose the objective device to pair.
Language Setting Example:
To change the language:
- Go to Settings > Language Setting.
- Select your preferred language and input method.
Projection Setting Example:
To adjust projection settings:
- Go to Settings > Projection setting.
- Configure projection mode and keystone correction as needed.
Audio Setting Example:
To adjust audio settings:
- Go to Settings > Audio setting.
- Adjust the volume.
Date and Time Setting Example:
To set the date and time:
- Go to Settings > Date And Time Setting.
- Select timezone, time format, date format, and set the date and time. You can choose to automatically determine the time.
Wireless Projection (Screen Mirroring)
Miracast (for Android Devices):
Ensure your Android device (phone, tablet, etc.) is on the same local wireless LAN as the projector.
- On your device: Go to Home Screen > My Apps > Miracast.
- Open the Miracast service.
- Turn on phone mirroring on your device.
- Connect to the projector.
AirPlay (for Apple Devices):
Ensure your Apple device (iPhone, iPad, etc.) is on the same local wireless LAN as the projector.
- On your device: Go to Home Screen > My Apps > AirPin.
- Open the AirPin service.
- Turn on phone mirroring on your device.
- Connect to the projector.
Note: AirPlay supports iOS Audio streaming and has experimental support for HD resolution mirroring. AirTunes latency can be adjusted.
DLNA/UPnP Media Streaming
The projector supports DLNA/UPnP for media streaming from Digital Media Servers (DMS) or Network Attached Storage (NAS).
- DLNA DMR: Digital Living Network Alliance Digital Media Renderer.
- DLNA/UPnP Media streaming: Play media from DMS/NAS.
- Reverse control mode for Screen Mirroring via Sender: Allows control of mirroring from the sending device.
- Emulate Click as Touch Pen: Enables touch pen emulation for clicks.
Connecting to External Devices (HDMI/Audio/Video)
After connecting the projector to another output device via HDMI or Audio/Video cable, ensure projection is enabled on the external display.
Applications: Access applications like Netflix, YouTube, Google Play, and Files directly from the projector.
Safety Instructions Summary
To ensure the longevity and safe operation of your projector:
- Keep the projector away from flammable, explosive materials, and strong electromagnetic interference.
- Avoid strong ambient light, including direct sunlight.
- Do not cover projector vents to prevent overheating.
- Use only the original power adapter and do not damage or overheat the power cord.
- Avoid touching the power adapter with wet hands.
- Do not look directly into the lens while projecting.
- Consult qualified personnel for installation and repair.
