ADJ Par Z Move: DMX Modes & Values
DMX Modes & Values
| 7 CH | 9 CH | 11 CH | VALUES | FUNCTIONS |
|---|---|---|---|---|
| 1 | 1 | 1 | 000-255 | PAN MOVEMENT (8-BIT) 0-100% (0°-540°) |
| 2 | 000-255 | PAN FINE (16-BIT) | ||
| 2 | 3 | 000-255 | TILT MOVEMENT (8-BIT) 0-100% (0°-200°) |
|
| 4 | 4 | 000-255 | TILT FINE | |
| 000-031 032-063 064-095 096-127 128-159 160-191 192-223 224-255 |
SHUTTER & STROBING LED OFF LED ON STROBING SLOW-FAST LED ON PULSE STROBING LED ON RANDOM STROBING SLOW-FAST LED ON |
|||
| 3 | 5 | 6 | 000-255 | MASTER DIMMER 0~100% |
| 4 | 6 | 7 | 000-255 | MASTER DIMMER FINE 0~100% |
| 5 | 7 | 8 | 000-255 | ZOOM 10°-40° |
| 9 | 000-020 021-040 041-060 061-080 081-100 101-120 121-140 141-255 |
DIMMER MODES STANDARD STAGE TV ARCHITECTURAL THEATRE STAGE 2 DEFAULT TO UNIT SETTING DIMMER SPEED FAST-SLOW (0.1-10S) |
||
| 6 | 8 | 10 | 000-255 | PAN/TILT MOVEMENT SPEED SLOW-FAST |
| 7 | 9 | 11 | 000-069 070-079 080-089 090-099 100-109 110-119 120-255 |
SPECIAL FUNCTIONS NO FUNCTION BLACKOUT WITH PAN/TILT MOVEMENT ENABLED BLACKOUT WITH PAN/TILT MOVEMENT DISABLED RESET ALL RESET ZOOM RESET PAN/TILT NO FUNCTION |
ADJ Products, LLC - www.adj.com - Par Z Move User Manual Page 13
System Menu
| MENU | SUBMENU | OPTIONS | DESCRIPTION |
|---|---|---|---|
| DMX Settings | DMX Address | 001-512 | DMX Addressing |
| DMX CH Mode | 7Ch / 9Ch / 11Ch | DMX Channel Mode Selection | |
| No DMX Status | Hold Last / Blackout / Manual | DMX Lost Status | |
| Pan Invert | ON / OFF | Reverse Pan Motion | |
| Tilt Invert | ON / OFF | Reverse Tilt Motion | |
| Status Settings | P/T Feedback | ON / OFF | Pan/Tilt Movement Feedback |
| P/T Speed | Speed 1 / Speed 2 | Pan/Tilt Movement Speed | |
| Hibernation | Off / 01M~99M / 15M | Sleep Setting (No Activity) | |
| Fan Settings | Head: Auto / High / Silent (Low) | Fan Speed Setting | |
| Personality | Dim Modes | Standard/Stage/TV/Architectural/Theatre/Stage2 Dimming Curve Modes Dim Speed 0.1S~10S |
Dimming Curve Modes Dimming Speed |
| LED Refresh Rate | 900Hz/1000Hz/1100Hz/1200Hz/1300Hz/1400Hz/1500Hz | LED Refresh Setting | |
| Gamma | 1.0/2.0/2.2/2.4/2.6/2.8 | Gamma Brightness | |
| Reset Motors | Reset All Motors: YES / NO Pan/Tilt Reset: YES / NO Zoom Reset: YES / NO |
Reset All Motors Reset the Pan & Tilt Motors Reset the Zoom Motor |
|
| Display | Intensity: 1~10 (Dimmest-Brightest) Display Invert: YES / NO Screen Saver Delay: OFF~10M Display Lock: ON / OFF Effect Adjust: Pan/Tilt/Zoom (-128~127) |
Display Intensity Adjustment Display Inversion Display Shutoff Time Display Control Lock Calibration |
|
| Service (Pass Code = 50) |
USB Port Power Update Software Factory Restore |
ON / OFF YES / NO YES / NO |
USB Port Activation Software Update Restore Factory Settings |
| Pan Pan Fine Tilt Tilt Fine Shutter Dimmer Zoom Special Functions |
000~255 000~255 000~255 000~255 000~255 000~255 000~255 000~255 |
Manual Control Settings |
NOTE: Shaded options represent the default settings.
ADJ Products, LLC - www.adj.com - Par Z Move User Manual Page 14
Information
| MENU | SUBMENU | OPTIONS | DESCRIPTION |
|---|---|---|---|
| Fixture Life Time | Power On Time - XXXXXX Hours | Total Running Time (Not Resettable) | |
| P-On Time-R - XXXXXX Hours | Total Running Time (Resettable) | ||
| P-On Time Reset - YES/NO Pass Code = 50 |
Reset Total Running Time | ||
| Total LED Time | LED On Time - XXXXXX Hours | Total LED On Running Time (Not Resettable) | |
| LED On Time-R - XXXXXX Hours | LED On Running Time (Resettable) | ||
| LED Time Reset - YES/NO Pass Code = 50 |
Reset LED Running Time | ||
| Fixture Temps | Current - XXX° | Current Temperature | |
| Max Resettable - XXX° | Maximum Temperature* Reached (Resettable) | ||
| Max Not Resettable - XXX° | Maximum Temperature** Reached (Not Resettable) | ||
| Rst Temp History Pass Code = 50 |
Reset Temperature | ||
| Fan Info. (RPM) | Base_Fan - XXX LED_Fan - XXX |
Base Fan Speed LED Fan Speed |
|
| DMX Values | Pan Tilt Zoom |
Current DMX Values | |
| Fixture Errors | Fixture Errors | List of Errors (One by One) | |
| Error Logs Reset Error Log - Pass Code = 50 |
Clear the Error Log | ||
| Max Temp LED ON | 32~167°F, 113°F*** / 0~75°C, 45°C*** | Fixture Temp. (LED On) | |
| High Temp LED OFF | 169~194°F, 169°F*** / 76~90°C, 76°C*** | Fixture Temp. (LED Off) | |
| Software Version | X.XX | Current Software Version |
*Current Maximum Temperature - Maximum fixture temp. that has been recorded, before reset and after reset.
**Maximum Temperature - Overall maximum fixture temp. that has been recorded. (Not Resettable)
***Normal Operating Temperature
ADJ Products, LLC - www.adj.com - Par Z Move User Manual Page 15
