VIMMERN

by IKEA

Product Overview

This document provides assembly instructions for the IKEA VIMMERN kitchen mixer tap, featuring a pull-out handspray. It includes a list of parts, tools required, safety information, and detailed steps for installation.

Contents and Parts

The following parts and tools are included or required for assembly:

192553: Handspray head
10095145: Hose connector (for handspray hose)
110084: Allen key (Hex wrench)
120087: Mounting bracket (triangular base)
120141: Mounting plate (curved)
120142: Mounting plate (curved)
120143: Threaded rod (for securing tap)
120172: Nut (for threaded rod)
126908: Installation tool (for hose connections)
10087964: Handle (mixer lever)
10094228: Cartridge (water control)
10094245: Locking mechanism part (for hose)
10092642: Internal fittings/seals (x2)

Required Tools (not included): Wrench, Silicone sealant.

Important Information & Safety

ℹ️ Installation must be carried out in accordance with industry regulations Säker Vatteninstallation.

⚠️ Switch off main shut-off valve before changing mixer tap.

Seal the open surfaces with silicone sealant to prevent water from penetrating the worktop upon any leaks. Silicone is not included.

Silicone sealant must be water- and mould-resistant and suitable for the installation, according to EN 15651-3, Class XS1.

The pipe connection needs to be flat and free from sharp edges.

⚠️ IMPORTANT! Do not tighten too hard: this can damage hoses/pipes and washers.

Technical Specifications:

Recommended Operating Temperature: Max. 60°C
Maximum Operating Temperature: Max. 80°C
Recommended Operating Pressure: 1-5 bar
Maximum Operating Pressure: 0.5-10 bar

Assembly Instructions

Step 1

Prepare the mixer tap body and the flexible hose. A close-up shows the connection point for the hose at the top of the tap.

Step 2

Connect the flexible hose to the main tap body. An upward arrow indicates insertion.

Step 3

Mount the tap through the worktop. The required hole diameter is indicated as Ø 34-38 mm (Ø 1 3/8" - 1 1/2"). A diagram shows the tap being inserted into the countertop. Text advises to seal the open surfaces with silicone sealant (not included) to prevent leaks. The tool (126908) and a silicone sealant gun are depicted.

Step 4

Note the spout rotation limits: 120° and 360°. A detail is indicated by a hand gesture.

Step 5

Connect the flexible hoses to the tap's internal connections using the installation tool (126908) and Allen key (110084). The cartridge (10094228) is visible near the connection point.

Step 6

Insert the hose assembly into the tap body. An upward arrow indicates the movement.

Step 7 & 8

Insert and rotate the locking mechanism part (10094245) into the tap body to secure the hose assembly.

Step 9

Attach the decorative cover to the tap body.

Step 10

Secure the tap to the worktop from underneath. This involves using the mounting bracket (120087), threaded rod (120143), mounting plates (120141, 120142), and nut (120172). The Allen key (110084) is used for tightening. A part labeled 10094228 is also shown in this step, possibly related to the securing mechanism or cartridge.

Step 11

Connect the flexible hoses to the water supply pipes. It is emphasized that the pipe connection must be flat and free from sharp edges. ℹ️ Incorrect hose types are shown with ❌. The instruction "IMPORTANT! Do not tighten too hard: this can damage hoses/pipes and washers." is provided. ⚠️

Step 12

Before first use: Unscrew the handspray and allow water to run freely for 5 minutes to flush the system. Then screw the handspray back in place. ℹ️

Maintenance: Check at regular intervals to make sure that the installation is not leaking. ℹ️

Exploded View of Parts

A detailed exploded view shows all components of the mixer tap with their corresponding part numbers:

Handspray head (192553)
Hose connector (10095145)
Internal fittings/seals (10092642 x2)
Tap body components
Handle (10087964)
Cartridge (10094228)
Mounting bracket (120087)
Threaded rod (120143)
Mounting plates (120141, 120142)
Nut (120172)
Locking mechanism part (10094245)
Installation tool (126908)
Allen key (110084)

	ÄLMAREN Kitchen Mixer Tap Installation Guide Comprehensive instructions and safety guidelines for installing the IKEA ÄLMAREN kitchen mixer tap, covering preparation, mounting, usage, and maintenance. Includes multilingual safety warnings and operational tips.
	TOLLSJÖN Kitchen Mixer Tap Installation Guide Detailed installation instructions for the IKEA TOLLSJÖN kitchen mixer tap with handspray, including parts, tools, specifications, and assembly steps.
	ÄLMAREN Kitchen Mixer Tap Assembly and Installation Guide Comprehensive guide for assembling and installing the IKEA ÄLMAREN kitchen mixer tap. Includes parts list, pressure specifications, installation steps, and important safety and compliance information.
	HAMNSKÄR Wash-Basin Mixer Tap Assembly Instructions \| IKEA Step-by-step assembly and installation guide for the IKEA HAMNSKÄR wash-basin mixer tap, including parts list, safety warnings, and technical specifications.
	DALSKÄR Wash-Basin Mixer Tap Installation Guide Comprehensive installation instructions for the IKEA DALSKÄR wash-basin mixer tap (model 905.321.17), covering tools, parts, assembly steps, safety precautions, and usage tips. Ensure proper plumbing and water safety compliance.
	GAMLESJÖN Kitchen Faucet Assembly and Installation Guide \| IKEA Step-by-step assembly and installation instructions for the IKEA GAMLESJÖN kitchen faucet. Learn how to properly install your new faucet, including safety tips, parts identification, and usage guidelines.
	PILKÅN Faucet Assembly Instructions Detailed assembly instructions for the IKEA PILKÅN faucet, including parts list, tools required, and step-by-step installation guidance.
	ÄLMAREN Kitchen Mixer Tap Assembly Instructions Official assembly instructions for the IKEA ÄLMAREN kitchen mixer tap, detailing parts, tools, and step-by-step installation procedures. Includes technical specifications and safety warnings.