ZHJ003 Outdoor Patio Chair Assembly Instructions
Assembly Instructions
Carefully unpack all components and verify that all necessary parts are included as listed in the packaging.
Identify each component and refer to the provided assembly diagram or step-by-step instructions.
Assemble the furniture in the order specified to ensure proper alignment and fit.
Use the provided tools or recommended tools for assembly. Do not use excessive force when tightening screws or bolts.
If any difficulties arise during assembly, consult the troubleshooting section or contact customer support.
Tools Required
[menu-icon] Tools Required
[allen-wrench-icon] An L-shaped Allen wrench is provided for assembly.
Parts List
| Part No. | Description | Quantity |
|---|---|---|
| A | Slats (for seat/back) | 2 |
| B | Side Panel (Left/Right) | 2 |
| C | Back Panel | 2 |
| D | Top Panel | 2 |
| E | M6x25mm Screw | 8 |
| F | M6x30mm Screw | 4 |
| G | M6x45mm Screw | 4 |
| H | Washer | 16 |
| I | Nut | 16 |
| Z | Adjustable Feet | 8 |
Product Assembly Steps
Important Note: Do not fully tighten all bolts until assembly is complete.
Step 1
Diagram shows two side panels (B) being connected to two slats (A) using screws (E) and washers (H). Nuts (I) are also used to secure the connection.
Illustration: Attaching slats (A) to side panels (B) with hardware (E, H, I).
Step 2
Diagram shows two back panels (C) being attached to the frame (B, A) using screws (E), washers (H), and nuts (I).
Illustration: Attaching back panels (C) to the frame with hardware (E, H, I).
Step 3
Diagram shows two top panels (D) being attached to the frame using screws (F), washers (H), and nuts (I).
Illustration: Attaching top panels (D) to the frame with hardware (F, H, I).
Step 4
Diagram shows the remaining two top panels (D) being attached to the frame using screws (F), washers (H), and nuts (I).
Illustration: Attaching remaining top panels (D) to the frame with hardware (F, H, I).
Step 5
Diagram shows four adjustable feet (Z) being screwed into the bottom of the chair frame.
Illustration: Attaching adjustable feet (Z) to the chair base.
Step 6
Illustration of the fully assembled outdoor patio chair.
Completed chair.
[checkmark-icon] Warranty Information
Warranty Coverage: Our warranty provides protection against manufacturing defects in materials and workmanship for a specified period from the date of purchase, as outlined in the accompanying warranty documentation.
Exclusions: The warranty does not cover damages resulting from misuse, negligence, accidents, normal wear and tear, unauthorized repairs or modifications, improper assembly, or failure to adhere to the care and maintenance guidelines provided.
[envelope-icon] Contact Information
If you have any questions, concerns, or need assistance, please reach out to the customer support team using the contact information provided below:
Customer Support Email: support@sunvivi.com
