ZJT005/ZJT006 Cantilever Patio Umbrella
Instruction Manual
Assembly Instructions
Carefully unpack all components and verify that all necessary parts are included in the packaging. Identify each component and refer to the provided assembly diagram or step-by-step instructions. Assemble the furniture in the order specified to ensure proper alignment and fit. Use the provided tools or recommended tools for assembly. Do not use excessive force when tightening screws or bolts. If any difficulties arise during assembly, consult the troubleshooting section or contact customer support.
Parts List
| Part No. | Description | Quantity | Part No. | Description | Quantity |
|---|---|---|---|---|---|
| A | Base support rail | 1 | B | Base support rail | 1 |
| C | Lower pole section | 1 | D | Crank handle | 1 |
| E | Base rotation mechanism | 1 | F | Crank mechanism housing | 1 |
| G | Springs (M8x20mm) | 6 | H | Washers/Nuts | 10 |
| J | Screws (M8x15mm) | 4 | K | Allen wrench | 1 |
| L | Umbrella canopy | 1 |
Product Assembly Steps
Step 1: Assemble Base Rails
Connect the two base support rails (A and B) to form the foundational base structure.
Diagram shows two long metal rails (A and B) being joined at their ends.
Step 2: Attach Base Rotation Mechanism
Attach the base rotation mechanism (E) to the center of the assembled base rails. Secure it using the provided springs (G), washers/nuts (H), and tighten with the Allen wrench (K).
Diagram shows the base mechanism (E) being fitted onto the cross-section of the base rails, with springs (G) and washers/nuts (H) being inserted and tightened with tool (K).
Step 3: Attach Lower Pole Section
Insert the lower pole section (C) into the base rotation mechanism (E). Secure it using screws (J), washers/nuts (H), and tighten with the Allen wrench (K).
Diagram shows the pole section (C) being inserted into the base mechanism (E) and secured with screws (J), washers/nuts (H), and tool (K).
Step 4: Attach Crank Mechanism
Mount the crank mechanism housing (F) onto the upper part of the pole section (C).
Diagram shows part F being fitted onto the top of the pole.
Step 5: Base and Pole Structure
The base and pole structure is now assembled.
Diagram shows the assembled base and pole.
Step 6: Add Umbrella Base (Optional)
If necessary, place an umbrella base for added stability.
Diagram shows the assembled structure being placed onto a separate base, possibly weighted.
Step 7: Attach Umbrella Canopy
Carefully attach the umbrella canopy fabric (L) to the top of the pole assembly.
Diagram shows the folded canopy (L) being attached to the top of the pole.
Step 8: Secure Canopy
Secure the umbrella canopy fabric to the frame using the provided springs (G) and washers/nuts (H).
Diagram shows springs (G) and washers/nuts (H) being used to attach the canopy fabric to the pole structure.
Step 9: Lock/Unlock Mechanism
Engage the locking mechanism by pushing the designated button or lever to secure the umbrella's position.
Close-up diagram shows a lever or button being pushed to engage a locking mechanism.
Step 10: Open Umbrella
Rotate the crank handle (D) clockwise to open the umbrella canopy.
Diagram shows the crank handle (D) being turned to open the umbrella canopy.
Step 11: Fully Open Umbrella
The umbrella is now fully open.
Diagram shows the umbrella fully extended and open.
Step 12: Rotation Functionality
The umbrella is designed for 360-degree rotation at the base and the canopy can also be rotated via the crank mechanism.
Diagrams illustrate 360-degree rotation of the base and the crank mechanism.
Step 13: Install Wind Rope (Optional)
If necessary, attach the wind rope to the umbrella canopy and pole for added stability in windy conditions.
Diagram shows a rope being attached to the umbrella canopy and pole, with arrows indicating the direction of attachment.
Maintenance and Care
Regularly inspect your product for signs of wear, loose strands, or damage. Address any issues promptly.
Hardware may loosen over time. Periodically check to ensure all connections are tight and re-tighten if necessary.
Do not dispose of packaging or shipping carton contents until assembly is completed to avoid accidentally discarding small parts or hardware.
Do not use sharp objects that may scratch the painted surface.
Brush off loose dirt. Spray on a cleaning solution of water and mild soap, and use a soft bristle brush to clean. Air dry.
Keep the umbrella closed during windy conditions or when not in use.
A base is recommended for safe and stable outdoor use.
Warranty Information
Warranty Coverage: Our warranty provides protection against manufacturing defects in materials and workmanship for a specified period from the date of purchase, as outlined in the accompanying warranty documentation.
Exclusions: The warranty does not cover damages resulting from misuse, negligence, accidents, normal wear and tear, unauthorized repairs or modifications, improper assembly, or failure to adhere to the care and maintenance guidelines provided.
Contact Information
If you have any questions, concerns, or need assistance, please reach out to our customer support team using the contact information provided below:
Customer Support Email: support@royalcraft.store
