Tribesigns Assembly Instructions
Conference Table
Model No.: HOGA-J0320, HOGA-J0404
Brand: Tribesigns
Manufactured by: Little Tree by Tribesigns
Website: www.tribesigns.com
Contact Us
We're here to help you.
Email: support@tribesigns.com ?
Phone: 1-424-220-6888 ?
Hours: 7 AM to 8 PM EST, Monday to Friday. ⏰
Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, please retain the original packaging and take photos of the packaging and the product, then contact us as soon as possible.
Warm Tips
- Carefully read these instructions and keep them for future reference.
- Check the parts list and confirm everything's there before starting assembly.
- When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
- Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.
How to Get the Assembly Video
Step 1: Scan the QR code to access the installation video. [QR Code for Installation Video] ?
Step 2: Alternatively, search for the Model No. (HOGA-J0320) on the Tribesigns website or YouTube.
Note: If you can't find the assembly video, please contact customer service.
General Assembly Information
Tools Recommended: Hand tools are recommended for assembly. [??]
Electric Screwdriver Caution: If an electric screwdriver is used, reduce power and torque to avoid damage to the product. [❗]
Assembly Process: Follow the steps carefully. Lay out all parts on a soft surface. If you encounter any issues or are unsure about parts, refer to the instructions or contact customer support. [❓?]
Parts List
| Item No. | Description | Quantity |
|---|---|---|
| 1 | Tabletop Panel | 2 pcs |
| 2 | Tabletop Panel | 1 pc |
| 3 | Leg Frame Component | 2 pcs |
| 4 | Leg Frame Component | 2 pcs |
| 5 | Support Beam | 2 pcs |
| 6 | Support Beam | 2 pcs |
| 7 | Connecting Bracket | 2 pcs |
| 8 | Support Bar | 2 pcs |
Caution: Make sure all parts are included. Most board parts are labeled or stamped on the raw edge. Contact Tribesigns for a free replacement if you encounter any damaged or missing parts. [❗]
Hardware List
| Letter | Description | Quantity | Size/Type |
|---|---|---|---|
| A | Screw | X16+1 | M6X12 mm |
| B | Screw | X8+1 | M6X15 mm |
| C | Screw | X16+1 | M6X25 mm |
| D | Screw | X4+1 | M6X35 mm |
| E | Screw | X4+1 | M6X48 mm |
| F | Screw | X20+1 | M6X55 mm |
| G | Screw | X1 | M4X55 mm |
| H | Screw | X6+1 | Ø10X50 mm |
| I | Screw | X4 | M6XØ20 mm |
| J | Connecting Plate | X4 | 40X20 mm |
Assembly Steps
Step 1: Assemble Base Frame Components
Attach connecting brackets (7) to support beams (6) using screws (A: M6X12 mm). Repeat for the second set of support beams (6). Then, attach these assembled sections to the support beams (5) using screws (A). Use screw (G: M4X55 mm) for specific connections as indicated. This step is performed twice (X2) to create two identical leg frame sub-assemblies. [⚙️]
Diagram shows parts 7, 6, 5, and hardware A, G. Indicates '[screw down 100%]' and 'X2'.
Step 2: Attach Leg Frames to Base
Take one leg frame component (4) and attach it to the assembled base structure from Step 1 using screws (C: M6X25 mm). Repeat for the second leg frame component (4). Then, attach the leg frame components (3) to the base structure using screws (C). This step is performed twice (X2) for both leg assemblies. [⚙️]
Diagram shows parts 4, 3, and hardware C. Indicates '[pre-drill 70%]' and 'X2'.
Step 3: Connect Leg Frames
Connect the two leg frame assemblies (3 & 4) together using support beams (6) and screws (C: M6X25 mm). Ensure proper alignment. [⚙️]
Diagram shows parts 6, 3, 4, and hardware C. Indicates '[pre-drill 70%]'.
Step 4: Attach Tabletop Panels
Place the tabletop panels (1 and 2) onto the assembled base structure. Secure the panels to the base using screws (H: Ø10X50 mm). Ensure all panels are correctly positioned before tightening. [⚙️]
Diagram shows parts 1, 2, and hardware H. Indicates '[pre-drill 70%]'.
Step 5: Secure Tabletop Panels
On the underside of the tabletop panels (1 and 2), attach connecting plates (J: 40X20 mm) using screws (B: M6X15 mm). These plates help join the tabletop sections together. [⚙️]
Diagram shows parts 1, 2, J, and hardware B. Indicates '[screw down 100%]'.
Step 6: Attach Leg Structure to Tabletop
Carefully invert the assembled tabletop. Attach the leg structure to the underside of the tabletop panels using screws (F: M6X55 mm) and screws (I: M6XØ20 mm) as shown in the diagram. [⚙️]
Diagram shows the leg structure being attached to the underside of the tabletop panels using hardware F and I. Indicates '[pre-drill 70%]'.
Step 7: Final Tightening
Complete the assembly by securely attaching the leg structure to the tabletop using screws (D: M6X35 mm) and screws (E: M6X48 mm). Ensure all connections are fully tightened for stability. [⚙️ ✔️]
Diagram shows final tightening of the leg structure to the tabletop using hardware D and E. Indicates '[screw down 100%]'.
Follow Tribesigns
Connect with us on social media:
[Facebook icon] Facebook | [Instagram icon] Instagram | [Pinterest icon] Pinterest | [Twitter icon] Twitter | [YouTube icon] YouTube | [TikTok icon] TikTok | [WhatsApp icon] WhatsApp
Thank you for your support!
