ErGear Electric Standing Desk

Specifications

• Height Adjustment Range: 27.9"-46.4" (71-118cm)
• Power Input: 100V-240V
• Max Speed: 25mm/s
• Operating Noise: <50dB
• Max Load: 132 lbs / 60kg

Supplied Parts and Hardware

Step 1

• 01 x 1: Desktop
• 02 x 2: Desk Leg
• A x 8: Bolt (M6 x 14mm)
• B1 x 1: Large Allen Wrench (5/32" (4mm))

Step 2

• 03 x 2: Leg Base
• A x 8: Bolt (M6 x 14mm)
• B1 x 1: Large Allen Wrench (5/32" (4mm))

Step 3

• 04 x 2: Storage Hook
• B2 x 1: Small Allen Wrench (1/8" (3mm))
• C x 4: Bolt (M5 x 10mm)

Step 4

• 05 x 1: Motor Connection Cable
• 06 x 1: Power Cable
• 07 x 1: Power Connection Box
• 08 x 4: Cable Clip

Assembly Instructions

Step 1: Attaching the Legs to the Desktop

Place the desktop (01) upside down on a soft cloth (not included). Attach the desk legs (02) to the desktop using bolts (A) and the large Allen wrench (B1).

Step 2: Attaching the Leg Bases

Attach the leg bases (03) to the desk legs (02) using bolts (A) and the large Allen wrench (B1).

Step 3: Attaching the Storage Hooks

Attach the storage hooks (04) to the desk legs using the small Allen wrench (B2) and bolts (C).

Step 4: Connecting the Cables

Connect the motor connection cables (05) to the motors. Connect the power cable (06) to the power connection box (07). Secure cables with cable clips (08).

Using the Controller

The controller features USB-C Output (9V 2A) and USB Output (5V 1A).

Tip: Reset before first use.

Main Settings

• Raise the Desk: Press the [Up Arrow] button to raise the desk until it reaches the highest position of 46.4" (118cm) or the button is released.
• Lower the Desk: Press the [Down Arrow] button to lower the desk until it reaches the lowest position of 27.9" (71cm) or the button is released.
• Save Current Height Setting: Press the [M] button. The screen will display 'S-.' Then press one of the preset buttons (1, 2, 3, or 4) to save the current height. Pressing a preset button will move the desk to the saved height.
• Set Highest Height Limit:
  1. Press the [M] button. The screen will display 'S-.'
  2. Press and hold the [Up Arrow] button until 'S-' flashes once, then release.
  3. Quickly press and hold the [M] button for 2 seconds. '999' will be displayed, indicating the highest limit is set.
• Set Lowest Height Limit:
  1. Press the [M] button. The screen will display 'S-.'
  2. Press and hold the [Down Arrow] button until 'S-' flashes once, then release.
  3. Quickly press and hold the [M] button for 2 seconds. '00.0' will be displayed, indicating the lowest limit is set.
• Clear Highest/Lowest Height Limit:
  1. Press the [M] button. The screen will display 'S-.'
  2. Press and hold the [M] button for 2 seconds. '555' will be displayed, clearing the limits.
• Lock/Unlock:
  • To lock: Press and hold the [M] button. The screen displays 'S-,' the current height, and then 'LOC.' Buttons are disabled.
  • To unlock: Press and hold the [M] button for 8 seconds. The screen displays the current height, and buttons are operable.
• Reset:
  1. Press and hold the [Down Arrow] button until the desk reaches its lowest level, then release.
  2. Press and hold the [Down Arrow] button for 5 seconds until 'RST' is displayed, then release.
  3. Press and hold the [Down Arrow] button again until the desk reaches its lowest level and moves up slightly. Reset is complete.

Other Settings

To adjust settings, first perform a reset until 'RST' is displayed. Then follow instructions for individual settings. Press and hold the [Down Arrow] button to exit, which will display the current height.

• Change Height Settings Operation: Press and hold the [1] button for 5 seconds to switch modes.
  • One-Press Mode: Short-press buttons [1], [2], [3], or [4] to move the desk to the saved height. Press any button to stop.
  • Press & Hold Mode: Long-press buttons [1], [2], [3], or [4] to move the desk to the saved height while the button is held.
• Change Display Height Units: Press and hold the [2] button for 5 seconds to switch between Metric (cm) and Imperial (inch).
• Change Collision Detection Sensitivity: Press and hold the [Up Arrow] button for 5 seconds to cycle through sensitivity levels: High (10.5), Medium (10.6), Low (10.7).
• Change Displayed Minimum Height: If using a different desktop or adding items that change the surface level, adjust the displayed height. Press and hold the [M] button for 5 seconds. The current minimum height will flash. Use the [Up Arrow] or [Down Arrow] button to adjust, then release to save. 'RST' will display after 5 seconds.

Protection Mode Error Codes

Troubleshooting: Please try resetting the desk for issues such as abnormal operation or error messages on the controller screen.

Contact Information

Thank you for choosing this product. ErGear strives to provide quality products and service. For any issues, please contact ErGear.

Technical Support

• (US/CA): 1-800-651-9525 (Mon-Fri, 8am-8pm CST)
• (UK): 44-808-196-3875 (Mon-Fri, 2pm-10pm UTC)

Other Info

Email: support@ergear.com

Website

https://ergear.com