MYBAT PRO Salsa Bluetooth Speaker
Model: MyBat Pro Salsa
Safety Measures
Thank you for choosing the MYBAT PRO series of Bluetooth speakers. Please read the instructions carefully before using this machine.
- Power Supply Wire Protection: Do not place the cable in the path of foot traffic or under heavy furniture. Always disconnect by pulling the plug, not the cable.
- Ventilation: Place the unit in a well-ventilated area on a stable surface to prevent overheating. Do not place on soft surfaces like beds or sofas.
- Dismantling: Do not dismantle the unit to avoid electric shock. Refer servicing to an authorized service center.
- Strange Odor: If a strange odor is detected, unplug the unit immediately and have it repaired by a qualified service center.
- Liquid Exposure: Do not expose this unit to liquid of any kind.
What's in the Box
- MYBAT PRO Salsa Bluetooth Speaker
- Microphone
- User Manual
- Charging Cable
- Remote Control
Overview
The MYBAT PRO Salsa features a control panel, handle, speakers, and colorful lights.
Features
Digital tube display, master volume, reverberation, microphone volume adjustment, and colorful lights synchronized with the speakers.
Control Panel
- Power Switch / Volume: Rotate right for Power ON / Volume +, rotate left for Power OFF / Volume -.
- Micro USB Charging Port: Charge the speaker using the provided Micro USB cable.
- Next: Single click for the next song (TF/USB) or next channel (FM).
- Play / Pause: Single click to play or pause music (TF/USB/Bluetooth). Short press to automatically search channels (FM). Press and hold to switch TWS mode.
- Digital tube display panel: Shows speaker status.
- Previous: Single click for the previous song (TF/USB) or previous channel (FM).
- Mode Switch / Light Switch: Single click to switch modes (Bluetooth/FM Radio/AUX/TF/USB). Press and hold for 3 seconds to turn colorful lights ON or OFF.
- ECHO: Adjusts microphone reverberation intensity.
- MIC VOL: Adjusts microphone volume.
- MIC IN: Connect the microphone here.
- AUX IN: Connect external audio sources via an audio cable.
- USB: Connect a USB storage device.
- TF: Insert a TF card.
- Charging indicator: Shows charging status.
Remote Control Panel
- Mode Switch
- Power on/off
- Mute
- Play/Pause
- Sound Effect (EQ)
- Volume +/-
- Previous / Next
- Number buttons (0-9)
- U/SD Area
Connections
- Bluetooth: Connect wirelessly via Bluetooth. The device name is "MyBat Pro Salsa".
- USB: Connect a USB drive.
- AUX: Connect an external audio source using an AUX cable.
- Microphone: Plug in a microphone using the MIC IN port.
- TF card: Insert a TF card into the TF slot.
TWS Dual Connection Mode
To connect two Salsa speakers:
- Turn on one speaker and enter Bluetooth pairing mode. Connect your phone's Bluetooth to this speaker.
- Turn on the second speaker and enter Bluetooth pairing mode.
- On either speaker, press and hold the Play/Pause button to pair the two speakers.
- Either speaker can control music playback (play/pause, next/previous).
- Once paired, the speakers will automatically connect when turned on.
- To unpair, press and hold the Play/Pause button on either speaker.
Specifications
- Product name: MYBAT PRO Salsa
- Power input: DC 5V
- Function: Support TWS/USB/TF/FM/AUX/MIC/Bluetooth
- Bluetooth solution: V5.3
- Speaker specification: Dual 8 inch
- Speaker Power: 40W
- Product size: 240*255*626mm
- Battery: 3.7V/3600MAH lithium battery
- Battery charge time: 3 Hours
- Battery playtime: 5 Hours at medium volume
- Bluetooth range: 10m
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
