MyBat Pro Rockit Buds True Wireless Earbuds
User Manual
Welcome
Thank you for using the MyBat Pro Rocklt Buds True Wireless Earbuds. Now you can blast off with full-range, high definition sound without wires getting in the way. Please read this user manual carefully and keep it for future reference.
Product Overview
Earbuds
[Diagram Description: Image showing a single earbud with labels pointing to: [Label 1] LED Indicator, [Label 2] Intelligent Touch Control, [Label 3] Noise-Reduction Microphone, [Label 4] Charging Case Connector.]
Charging Case
[Diagram Description: Image showing the charging case with labels pointing to: [Label 1] Charging Case, [Label 2] LED Indicator, [Label 3] USB-C Charging Port.]
How to Charge
Fully charge your earbuds and case before first use.
[Diagram Description: Image sequence showing how to charge the case by connecting a USB-C cable to a power source, and then placing the earbuds into the charging case.]
Charging Case:
- Connect the charging case to a power supply using the included USB-C charging cable.
- Place the earbuds in the charging case.
NOTE: Opening or closing the charging case activates the LED indicator. Ensure the earbuds and USB-C power are dry before charging.
Charging Case Indicator Status
- Charging: Red light stays on.
- Fully Charged (No Light): Red light turns off.
[Diagram Description: Visuals showing the charging case with red light on for charging, and no light for fully charged.]
Package Contents
- [Item 1]: Rocklt Buds True Wireless Earbuds
- [Item 2]: Charging Case
- [Item 3]: USB-C Charging Cable
- [Item 4]: User Manual
[Diagram Description: Visuals of the earbuds, charging case, and USB-C cable.]
Powering On/Off
Power On:
Open the charging case and remove the earbuds.
Power Off:
When placed in the charging case with the lid closed, the earbuds will automatically turn off.
NOTE: If there's no connection after 3 minutes, the earbuds will shut off.
[Diagram Description: Visuals showing the charging case with earbuds inside (off) and earbuds removed (on).]
How to Pair
True Wireless Stereo Connection
The right earbud will automatically connect with the left earbud once the charging case is opened.
Pairing To Your Devices
- Open the charging case. The earbuds will automatically power on and enter pairing mode.
- Ensure your phone's Bluetooth settings are turned on.
- Select "MyBat Pro Rockit Buds" from the list of found devices and pair.
[Diagram Description: Visuals showing the charging case open, earbuds, and a smartphone screen displaying Bluetooth pairing with "MyBat Pro Rockit Buds" selected.]
Audio Controls
| Action | Control |
|---|---|
| Play / Pause | Tap 2x (R) |
| Previous Track | Tap 3x (L) |
| Next Track | Tap 3x (R) |
Call Controls
| Action | Control |
|---|---|
| Answer / End Call | Tap 2x (L or R) |
| Reject Call | Tap & Hold (L or R) (2 Secs) |
Voice Controls
| Action | Control |
|---|---|
| Activate Siri & Other Voice Assistants | Tap 2x (L) |
Specifications
| Input | DC 5V/500mA |
| Battery Capacity | 25mAh x 2 (Earbuds), 300mAh (Charing Case) |
| Charging Time | 1 Hour (Earbuds), 2 Hours (Charging Case) |
| Driver Size | 13mm |
| Bluetooth Version | 5.1 |
| Bluetooth Range | 33ft/10m |
| Frequency Response | 20Hz~20kHz |
| Impedance | 32Ω |
Safety Instructions
To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level.
Be sure to observe the following guidelines when using the earbuds:
- Keep your listening volume at a reasonable level during extended playing.
- Make sure to adjust the volume gradually as your hearing adapts.
- Keep the volume at a level where you can hear your surroundings.
- Use caution or discontinue use in hazardous conditions.
- It is not recommended to drive with the earbuds in and could be illegal in some areas.
- Avoid distractions from music or calls while in traffic or other potentially dangerous environments.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference and
- This device must not accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
