MyBat Pro Eztalk Wireless Headset User Manual
Product Overview
The MyBat Pro Eztalk Wireless Headset features a comfortable over-ear design with a rotating boom microphone. Key components are labeled: 1. Volume Down, 2. LED Indicator, 3. Micro USB port, 4. Charging Base Connector, 5. Multi-Function Button, 6. Volume Up, 7. Microphone.
Model: MyBat Pro Eztalk
Package Includes
- A. MyBat Pro Eztalk Wireless Headset x 1
- B. Charge Base x 1
- C. Micro USB Charging Cable x 1
- D. User Manual x 1
Basic Operation
| Button/Function | Operation Instruction |
|---|---|
| Power On | Press & Hold Button for 1 to 3 seconds |
| Power Off | Press & Hold for 5 seconds |
| Pairing Mode | When powered off, press & hold for 5 to 8 seconds. If on and unconnected, double press the button to enter pairing mode. |
| Play / Pause | Quickly press button |
| Redial a call | Double press the button to dial previous call |
| Voice Command | Press & Hold for 1 second |
| Audio Switch | Press & Hold for 1 second then release to activate |
| Answer call | Quickly press button when call is incoming |
| End Call | Quickly press button during the call |
| Reject call | Press & Hold for 1 second when call is incoming |
| Volume Up | Quickly press button |
| Next Song | Press & Hold for 1 second |
| Volume Down | Quickly press button |
| Previous Song | Press & Hold for 1 second |
Bluetooth Pairing and Setup
1. When powered off, press & hold for 5 to 8 seconds. If on and unconnected, double press the button to enter pairing mode. LED Indicator light on headset will flash blue and red when in pairing mode.
2. Turn Bluetooth settings on your device and search for 'MyBat Pro Eztalk' on the list to connect. LED Indicator will flash blue once connected.
3. Control volume, answer calls, and skip tracks all from the MyBat Pro Eztalk Wireless Headset.
Connect Two Devices
A. Follow instructions to pair the first device as noted above. Once connected, turn off the Bluetooth function for the first device.
B. Double press the button on the headset to enter pairing mode. Check LED Indicator is flashing blue & red alternatively.
C. On the second device, turn the Bluetooth settings on and search for 'MyBat Pro Eztalk' on the list to connect. LED Indicator will flash blue once connected.
D. Turn the Bluetooth settings back on the first device to reconnect to 'MyBat Pro Eztalk', and now both devices will be connected.
Music can only be played from one device, no matter if there are two devices connected. If you would like to play music from the secondary device, the music app and function must be stopped from the first device. The same applies for calls.
LED Indicator
| Mode | LED Indicator |
|---|---|
| Power on | LED Blue flashes 1 second |
| Power off | LED Red flashes 1 second |
| Pairing mode | LED Red & Blue flashes alternately |
| Connected | LED Blue flashes once every 5 seconds |
| Charging | Solid LED Red |
| Full charged | Solid LED Blue |
| Low battery | LED Red flashing |
Charging
Please charge the EZTALK Wireless Headset as soon as the LED flashes Red. Charging time is approximately 2 hours. The LED will turn Blue once fully charged.
1. Charge Connections
Charge with Micro USB Cable (*Adapter Sold Separately)
2. Charging Base
Please place the EZTALK Wireless Headset onto the charging base, then connect the base to the Micro USB cable. *Adapter Sold Separately.
Please charge this headset at least once every two months if not in use.
Product Specification
- Bluetooth Version: Bluetooth V5.0
- Bluetooth Chipset: CSR 8615
- Operation Range: 10M
- Bluetooth Protocols: HSP HFP A2DP AVRCP
- CODEC Code: SBC
- Battery Capacity: 180mAh/3.7V
- Charging Time: 2H
- Stand-by Time: 200H
- Working Time: About 17H (50% Volume)
- Headset Net Weight: About 51g
- Charge Base Net Weight: About 242g
- Headset Dimension: 163.21*142.27*48.5mm
- Charge Base Dimension: 79*73*31mm
Actual working time will vary depending on type of usage.
Notice of Compliance
The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
FCC rules: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FAQs
A. My device is no longer connecting to the EZTALK Wireless Headset. How do I reconnect?
The Wireless Headset will automatically try to connect with a device it was successfully paired with. If unsuccessful, please disconnect the Bluetooth pairing from your device and initiate the pairing process from the beginning.
B. How can I remove a paired device from the EZTALK Wireless Headset?
To remove paired devices, press and hold both Volume Up and Volume Down buttons at the same time for 5 seconds. The LED Indicator will flash Blue and Red, which means the pairing has been removed successfully. If there is a pairing connection problem, you can try this step to reset pairing.
C. What is the password for pairing?
If your device requires a password for pairing, try one of the following options below: 0000, 8888, 1111 or 1234. Note, not all devices require a password to be entered.
D. What power source do I need to use to charge the Wireless Headset?
Any standard USB-A compatible adapter or port will allow you to charge the Headset. Please note the adapter or power source is not included, only the Micro USB Cable and Charging Base.
E. How can I enter Three-Way Calling mode?
If a secondary call is incoming, quickly press the Multi-Function Button to answer the new call and hang up the current call. To put your current call on hold, double press the button to answer the new call. To reject an incoming call while on the phone, press and hold the button for 1 second. To switch between calls, quickly double press the button to alternate between callers.
