Vimar By-Me Plus Smart Automation Devices

Product Descriptions

• 32021.x: XT By-me control device for home automation with 2 buttons, configurable as a single rocker button. Features include status LED, dimmable night-time identification, and a central LED matrix for custom symbols or animations. Requires 1 front module.
• 32023.x: XT control device for By-me home automation with 2 buttons, configurable as a single rocker button. Features proximity function, status LED or scenario animation, dimmable night-time identification, and a central LED matrix for custom symbols or animations. Requires 1 front module.
• 32024.x: XT control device for By-me home automation with 4 buttons, proximity function, status LED, dimmable night-time identification. Requires 1 front module.
• 32044.x: XT control device for By-me home automation with 4 buttons, backlit CLIMA symbols, dimmable night-time identification. Requires 1 front module.

Features

• Power Supply: Supplied by electrified XT support art. 32602.x, 32603.x, 32604.x, 32613.x or 32614.x and related node art. 32001.
• Maximum BUS Absorption: 7.5 mA for 32021.x; 12.5 mA for 32023.x, 32024.x, 32044.x.
• Configuration/Reset Button: Includes a red LED and a configuration/reset button.
• Operating Temperature: -5 °C to +45 °C (indoor use).
• Module Size: Occupies 1 front module (30.5 mm).
• Standby Brightness: Selectable via parameters.
• Connection: Rear connection to electrified support 32602.x, 32603.x, or 32604.x.
• Protection Rating: IP20.
• Button Functionality: Button and rocker blocks belong to a single group.

Functionality Comparison Table

Configuration

Configuration can be done using the View Pro App. For detailed instructions, refer to the manuals available on the www.vimar.com website.

Installation Guidelines

• Installation must be performed by qualified personnel in accordance with current electrical installation regulations in the country of installation.
• The device must be installed on electrified XT supports:
  • 2-module art. 32602.x (for 2-module boxes)
  • 3-module art. 32603.x and 32613.x (for 3-module rectangular boxes)
  • 4-module art. 32604.x and 32614.x (for 4-module rectangular boxes)
• To optimize operation, it is recommended to enable only one proximity sensor per light point, disabling others.
• Avoid installing two or more commands with active proximity sensors facing each other if the distance is less than 4 meters. [Diagram showing two devices facing each other with a 4m distance indicator]
• Avoid installing a button with an active proximity sensor facing a device with an infrared receiver to prevent interference.
• When removing or inserting buttons and labels, be careful not to smudge or scratch the proximity sensor lens.

Regulatory Compliance

Complies with Low Voltage (BT), EMC, and RoHS Directives. Adheres to standards IEC 60669-2-1, EN 50491-2, EN IEC 63044, EN IEC 63000. In accordance with REACH Regulation (EC) No. 1907/2006 - Art. 33. The product may contain traces of lead.

CE

Product Views and Diagrams

• Front and Rear View: Diagrams illustrating the front and rear views of models 32021.x, 32023.x, 32024.x, and 32044.x, indicating button layouts, LEDs, and proximity sensors.
• Device Attachment: Step-by-step diagrams showing how to attach the device to its support.
• Device Removal: Step-by-step diagrams illustrating the process of removing the device from its support.

WEEE Information

The crossed-out wheelie bin symbol on the equipment or its packaging indicates that the product must be collected separately from other waste at the end of its life. Users should take the end-of-life equipment to suitable separate collection centers for electrical and electronic waste. Alternatively, users can return the equipment to the distributor free of charge when purchasing an equivalent new product. Distributors of electronic products with a sales area of at least 400 m² must also accept electronic products smaller than 25 cm for disposal free of charge, without purchase obligation. Proper separate collection for recycling, treatment, and environmentally compatible disposal helps prevent negative effects on the environment and health and promotes the reuse and/or recycling of the equipment's materials.