Vimar By-Me Plus XT Smart Automation Devices

Product Descriptions

• 32021.x: XT By-me automation device with 2 push-buttons, configurable as a single push-button. Features an LED for status indication and visibility in the dark with intensity regulation, and a central LED matrix for symbol customization or animation. Occupies 1 front module.
• 32023.x: XT By-me automation device with 2 push-buttons, configurable as a single push-button. Features Proximity function, an LED for status or scenario animation, and visibility in the dark with intensity regulation. Includes a central LED matrix for symbol customization or animation. Occupies 1 front module.
• 32024.x: XT device for By-me automation with 4 push-buttons, Proximity function. Features LEDs for status indication and visibility in the dark with intensity regulation. Occupies 1 front module.
• 32044.x: XT device for By-me automation with 4 push-buttons, featuring back-lit CLIMATIZATION symbols and visibility in the dark with intensity regulation. Occupies 1 front module.

Features

• Power Supply: Supplied by electrified XT support (art. 32602.x, 32603.x, 32604.x, 32613.x or 32614.x) and corresponding node (art. 32001).
• BUS Absorption: 7.5 mA for 32021.x; 12.5 mA for 32023.x, 32024.x, 32044.x.
• Configuration/Reset: Red LED and configuration/reset button.
• Operating Temperature: -5 °C to +45 °C (indoor use).
• Module Occupancy: Occupies 1 front module (30.5 mm).
• Stand-by Luminosity: Selectable via corresponding parameters.
• Connection: Rear connection to electrified support (art. 32602.x, 32603.x, or 32604.x).
• Protection Rating: IP20.
• Button/Rocker Depth: Functional blocks for push-buttons and rockers have a group depth equivalent to 1.

Configuration and Installation

• Configuration: Configuration can be done using the View Pro application. For details, refer to the manuals available on www.vimar.com.
• Installation Norms: Installation must be performed by qualified personnel in compliance with current regulations for electrical material assembly in the country of installation.
• Mounting: Devices must be mounted on electrified XT supports: 2 modules (art. 32602.x) for 2-module boxes, 3 modules (art. 32603.x and 32613.x) for rectangular 3-module boxes, 4 modules (art. 32604.x and 32614.x) for rectangular 4-module boxes.
• Proximity Sensor: For optimal operation, it is advisable to activate only one proximity sensor per light point, deactivating others. Avoid mounting two or more controls with activated proximity sensors facing each other at a distance less than 4 meters. Avoid mounting a button with an activated proximity sensor in front of a device with an infrared receiver to prevent interference.
• Care: During button disassembly, label insertion, and button hooking, take care not to soil or scratch the proximity sensor lens.

Compliance

The devices comply with the Low Voltage Directive, the Electromagnetic Compatibility Directive, and the Restriction of Hazardous Substances Directive. They also adhere to IEC 60669-2-1, EN 50491-2, EN IEC 63044, and EN IEC 63000 standards. The product may contain traces of lead, as per REACH Regulation (EU) No. 1907/2006 - Art. 33.

Certifications: CE

Diagrams and Visuals

Front and Rear Views

Diagrams illustrate the front and rear views of models 32021.x, 32023.x, 32024.x, and 32044.x, indicating button and LED configurations. Key indicators are:

• A: Red LED
• B: Proximity sensor
• C: Configuration/reset button
• D: Button and white LED
• E: Button and white LED matrix

Device Attachment and Detachment

Step-by-step diagrams show the process for attaching and detaching the device from its support.

WEEE Information

The crossed-out wheelie bin symbol on the equipment or its packaging indicates that at the end of its life, the product must not be disposed of with other waste. Users must deliver the equipment to a collection center for electrical and electronic waste. Alternatively, used equipment can be returned free of charge to the retailer when purchasing a new equivalent product. Retailers with a sales area of at least 400 m² for electronic equipment must accept used electronic products smaller than 25 cm free of charge, without purchase obligation. Selective collection facilitates recycling, proper treatment, and environmentally compatible disposal, preventing harm to nature and human health.