Tefal X-PLORER SERIE 50

1. Set Up the Docking Station

Choose a suitable location for the docking station, ensuring approximately 1.5 meters of clearance on each side and 2 meters in front of the station.

Connect the docking station to a power outlet.

2. Charge the Robot

Position the robot on its docking station. The button on the robot will flash red while charging and turn solid when fully charged.

Allow up to 6 hours for the robot to reach a full charge.

3. Download the Tefal Robots App

Download the free Tefal Robots application from your mobile device's app store:

[Download on the App Store]

[Get it on Google Play]

Follow the in-app instructions for optimal robot performance and features.

4. Attach the Mop Support

Clip the mop support into the two designated holes on the robot.

5. Prepare for Mopping

The robot supports different mop types:

• Blue Mop: Standard cleaning.
• Red Mop: Animal Scrub mop for pet stains.
• Green Mop: Allergy mop for fine particles, used without water.

Moisten the microfiber cloth with water before use.

Attach the mop to the water tank.

Open the water tank on the mop support and fill it with 110 ml of water.

Close the water tank securely.

6. Select Cleaning Mode

Choose from three cleaning modes by pressing the robot's button:

• Methodic Mode: Press the button once.
• Spot Mode: Press the button twice.
• Wall Follow Mode: Press the button three times.

7. Turn the Robot Over

Turn the robot back over as instructed.

8. Define No-Go Zones

Utilize the optional magnetic strip (sold separately, commercial reference: ZR69001) to create restricted zones for the robot.