Introduction
This document provides instructions for the Tefal X-plorer Serie 60 robot vacuum cleaner.
Please read the "Safety and use instructions" booklet before first use.
Getting Started
Unpacking and Components
The package includes the robot vacuum cleaner, charging station, power adapter, and other accessories.
Setting up the Charging Station
Place the docking station on a hard floor with at least 1.5m clearance on each side and 2m in front. Do not place near stairs. Ensure the cable is tidy.
Connecting the Power Adapter
Connect the power adapter to the charging dock and power supply. Arrange the cable to prevent entanglement.
Operation
Charging the Robot
To charge, place the robot on the docking station so the charging plates touch. The recharge light flashes blue (⚡) while charging and stays solid blue when fully charged.
Cleaning Modes
Methodic Cleaning
Press the Power button (▶️) once to start systematic cleaning of all accessible areas.
Spot Cleaning
Press the Power button (▶️) twice to clean a localized area. This mode is not available when the robot is on the docking station.
Wall Follow
Press the Power button (▶️) three times to clean along walls and in corners.
Pausing and Returning to Dock
Press the Power button (▶️) to pause cleaning. The button will flash blue. To return the robot to the charging station, press the Recharge button (?); the button will turn red.
Using the Tefal Robots App
Download the free "Tefal Robots" app from the App Store or Google Play to access all features. Follow the in-app instructions.
Maintenance
Indicator Lights
The Wi-Fi indicator LED shows connection status: solid blue (connected), flashing blue (connecting), off (not connected).
Cleaning Charging Contacts
Open the flip cover (?), turn off the power (?), and wipe the charging contacts with a dry cloth monthly. Do not use oil.
Cleaning the Dust Box and Filter
Open the flip cover (?), remove the dust box, clean it, and rinse. Clean the filter screen with a brush (?). Clean the dust box weekly.
Cleaning the Sweepers
Clean the middle sweeper by pushing the lock lever and lifting it out. Clean side brushes (?) regularly and replace them every 6 months.
Cleaning Wheels and Sensors
Clean robot wheels (⚙️) weekly to remove hair and fibers. Use the provided tool to extract the front wheel. Wipe light-transmitting plates and sensors with a dry cloth after each use.
Maintenance Schedule
| Component | Cleaning Frequency | Replacement Frequency |
|---|---|---|
| Dust collector | After each use | Not applicable |
| Filter | Once a week | Twice per year |
| Brush (main/side) | Once a week / Once a month | If required / Twice per year |
| Charging base | Once a week | Not applicable |
| Fall sensors | Once a week | Not applicable |
| Front wheel | Once a week | Not applicable |
| Brush heads (side brushes) | Once a month | Twice per year |
Troubleshooting
If you encounter issues, consult the following table:
Common Issues and Solutions
Charger Issues
Charger getting hot is normal. If the charger is connected but the appliance is not charging, check the connection or contact support.
Appliance Stops During Use
If the appliance stops, it may be overheating (⚠️). Turn it off and let it cool for at least 1 hour. Contact support if overheating persists.
Battery Depletion
If the appliance stops after the charge light flashes, the battery is depleted. Recharge the vacuum cleaner.
Brush Issues
If the power brush is not working properly or makes noise, check for obstructions or wear. Contact support for replacement parts.
Suction Problems
If suction is poor, check for blocked intake channels, full dust collector, incorrect dust collector fit, clogged intake head, or blocked foam filter.
Error Codes
Refer to the error code table for specific issues indicated by indicator lights.
| Error Code (Indicator Flashes) | Description |
|---|---|
| POWER flashes twice | Left wheel not working, overload. |
| POWER flashes 3 times | Right wheel not working, overload. |
| POWER flashes 4 times | Robot lifted for over 1 second. |
| POWER flashes 5 times | Front wheel stuck or not working. |
| POWER flashes 6 times | Cliff sensors not working. |
| POWER flashes 7 times | Low battery. |
| POWER flashes 8 times | Bumper switch not restored. |
| DOCKING flashes 2 times | Main brush not working, overload. |
| DOCKING flashes 3 times | Side brush not working, overload. |
| DOCKING flashes 4 times | Wall sensor error. |
| DOCKING flashes 5 times | Fan motor not working, overload. |
| DOCKING flashes 6 times | No dustbin. |
| DOCKING flashes 7 times | Charging error (poor connection). |
Safety Warnings
Do not throw the robot in the bin with household waste (❌). Always wear gloves and protective gear (?) when handling the battery.
Battery Removal and Disposal
Turn off the robot (?) before removing the battery. Follow the specific instructions for your model to access and remove the battery. Recycle the battery and robot.
Battery Lifespan
To extend battery life, keep the robot charged when not in use. If storing the robot separately, ensure it is off and fully charged. Store in a cool, dry place. Charge every 3 months if not in use.
