PETKIT USER MANUAL

01 PRODUCT DESCRIPTION

Front view

Petting Door lock: Secures the petting door.

LED control panel: Interface for controlling the device.

Tempered glass door: Allows visibility into the cabin.

Air outlet: Vents for air circulation.

Removable air outlet base plate: Part of the air circulation system.

Openable Petting Door: Door for pet access/interaction.

Main part: The primary body of the device.

Removable air filter: Filters air entering or exiting the device.

Door handle: For opening the main cabin door.

Power cord: Connects the device to a power source.

Exclusive protective cover: Cover for dust prevention and disinfection mode.

Back view

Power switch: Turns the device ON/OFF.

Power socket: Connection point for the power cord.

Air inlet: Where air enters the device.

Filter cotton: Part of the air inlet system.

Air inlet cover: Covers the air inlet.

Note: Product images are for illustration purposes only. Actual product may vary.

02 SET-UP

For pet safety, the AIRSALON MAX PRO is not activated upon first power-on. The LED screen will flash. Download the "PETKIT" App to complete safety operation instructions and activate the product. After activation, use the AIRSALON MAX PRO according to the product instructions.

Scan QR code to download the PETKIT App for further assistance.

Scan the QR Code to watch a video on How to Set Up AIRSALON MAX PRO.

03 MAINTENANCE AND CLEANING

Scan the QR Code to watch a video on How to Clean AIRSALON MAX PRO.

04 LED CONTROL PANEL

Negative Ion Indicator: Light on: Activated; Light off: Not-activated.

Fan Indicator: Light on: Activated; Light off: Not-activated.

Operation indicator:

• Single click START: Start drying (Green light on).
• Single click again: Pause drying (White light on).
• Hold START: Stop drying (White light on).
• Turn on Disinfection Mode through App: White light on.

Temperature Setting: Single click +/- to adjust temperature between 36°C to 40°C. Use PETKIT APP to convert to Fahrenheit (°C to °F).

Fan Speed Setting: Single click +/- to adjust among 6 levels.

Time Setting: Single click +/- to increase/decrease time by 1 minute. Keep pressing +/- to continuously increase/decrease time in 5-minute increments.

Screen lock:

• Double click LOCK: Unlock screen (Light off).
• Double click again: Lock screen (Light on).

Light indicator:

• Single click LIGHT: Cabin light on.
• Single click again: Cabin light off.

05 DISINFECTION MODE

Note: When using disinfection mode, ensure the pet is not in the drying box.

1. After confirming the cabin door and petting door are closed tightly, put on the exclusive protective cover. Ensure the drying box is completely wrapped.
2. Open the Disinfection Mode in PETKIT App.
3. When disinfection mode is on, the indicator light on the screen panel turns red, and the cabin light will flash. The screen will start countdown synchronously. The disinfection mode will automatically exit when finished.
4. After disinfection mode is complete, wait for 90 minutes before removing the exclusive protective cover and using the device normally. (Indicator: >90 MIN)

Protective Cover Care: The exclusive protective cover can be used for daily dust prevention. It can be washed by hand or machine at a temperature below 30 °C. It cannot be bleached or dried in a tumble dryer. Ensure it is completely dried before use.

Extending Disinfection Duration: If you wish to extend the duration, open the disinfection mode again in the PETKIT App after the operation countdown is over.

Disinfection mode precautions:

• ⚠️ Do not put pets inside during disinfection mode. Store the exclusive protective cover properly to prevent deformation or damage.
• ⚠️ To ensure safety, disinfection mode can only be used after the exclusive protective cover is installed.
• ⚠️ After disinfection mode is complete, wait for 90 minutes before removing the exclusive protective cover or opening the cabin door.

06 BASIC SPECIFICATIONS

07 A MESSAGE TO OUR VALUED CUSTOMERS

• Thank you for purchasing the PETKIT AIRSALON MAX PRO Smart Pet Dryer. PETKIT has strived to make life easier for you and your pets with technology.
• Please carefully read the User Manual before using the product. By setting up and using this product, you acknowledge that you have read and accepted the safety guidelines.
• PETKIT is not liable and will not accept responsibility for any accidents or injuries resulting from improper use of this product.
• PETKIT reserves the rights of interpretation and revision.

08 USER SAFETY GUIDE

• Failure to follow safety guides can result in product malfunction or unforeseen mishaps.
• Pet owner must be present when the pet is using this product.
• This equipment is strictly for indoor use in a dry environment. Do not use it on wet ground.
• After each drying, clean hair in the dryer and air inlet immediately. Power off when cleaning.
• Do not place towels, mats, or other items that block the air outlet, causing abnormal temperature or fan speed.
• Place the equipment on a hard, flat horizontal surface, not on a soft or uneven object, to prevent falling.
• This equipment is applicable only to pet cats and small dogs 6 months old and above.
• Minors are prohibited from using this device.
• If a pet has special circumstances (e.g., too old, difficulty moving, physiological diseases), consult a professional veterinarian and use under guidance.
• In case of abnormal heating or internal noise, do not disassemble the equipment without permission. Seek repair from professional personnel.
• If the pet feels uncomfortable, push the Cat Patting Window or adjust wind force. If discomfort persists, stop use immediately.
• When the pet is inside, do not move the equipment to prevent falling.
• Use correctly in low voltage mode to avoid electricity leakage from pet biting wires.
• For prolonged storage, switch off the power first and unplug the power cord.
• Do not place in direct sunlight or near ignition sources.
• Do not soak this product in water.
• Do not stack articles on top of the equipment to prevent affecting normal operation.
• Use the provided power cord; otherwise, it may damage the equipment or cause safety hazards.
• Reserve 10cm space when placing the equipment beside a wall.
• The product must be used below an altitude of 2000 meters.
• If you encounter any problems, contact PETKIT immediately.

09 APPROVALS AND CONTACT

The device has been approved for use in EU countries and is provided with the CE mark.

All necessary documentation is available on the website: www.electric-collars.com.

Changes to technical parameters, properties, and printing errors reserved.

Service center and distribution

Reedog, sro

Sedmidomky 459/8

101 00 Prague 10

Phone: +1 646 980 4569

Email: info@electric-collars.eu