PETKIT EVERSWEET MAX (CORDLESS) USER MANUAL

01 PRODUCT LIST

* Please ensure that all accessories are present before installation and use.

• Main Unit: The primary device housing the water tank and pump mechanism.
• Outlet Pipe: A clear tube to direct water flow.
• Filter: A replaceable filter cartridge for water purification.
• Wireless Water Pump: The submersible pump unit.
• 2 in 1 Cleaning Brush: A brush with two different heads for cleaning the device.
• Power Cord: Cable for powering the device.
• User Manual: This document.

Note: The water pump operates continuously in normal mode. Its service life may vary based on usage and maintenance. Replace the water pump if necessary. Periodic product improvements may be implemented; actual products may differ slightly from images shown.

02 PRODUCT DESCRIPTION

The PETKIT Eversweet Max (Cordless) consists of the following components:

• Control Module: Houses the electronic controls and status indicators.
• 304 Stainless Steel Water Tray: The dish where water is dispensed.
• Filter: Located within the Filter Holder.
• Filter Holder: Holds the filter in place.
• Water Outlet: The spout from which water flows.
• Lid: Covers the water tank and supports the outlet mechanism.
• Latch: Secures the water tray.
• Outlet Pipe: Connects the pump to the water outlet.
• Wireless Water Pump: The component that circulates water.
• Water Tank: Holds the water supply.
• Wireless Base: Connects to the control module and houses the battery/charging components.

⚠️ Caution: The wireless base and control module contain electronic components and should not be rinsed or soaked.

03 PRODUCT INSTALLATION

1. Take out the control module vertically upwards.
2. Unlock the latch and remove the stainless steel water tray.
3. Remove the lid and filter holder assembly.
4. Place the water pump into the designated groove in the water tank. Insert the outlet pipe into the water outlet above the wireless water pump. Note: Ensure the outlet pipe is fully inserted.
5. Place the lid, position the filter holder as shown, and insert the filter into its holder. (Before using the filter, please read the instructions on the filter package carefully.)
6. Add water to the water tank up to the MAX line.
7. Insert point A of the water tray under the outlet, and pull the latch outward to secure the other side of the water tray.
8. Insert the control module vertically into the base. The installation is now complete.

04 HOW TO USE

4.1 Usage Modes

This product offers two power supply options:

4.1.1 Plug it in

When plugged in, the device supports both continuous and intermittent water dispensing modes. After connecting via Bluetooth, you can switch between modes and pause dispensing using the PETKIT App.

Note: The device will automatically resume operation after a 10-minute pause to ensure water is always available.

1. Remove the control module, open the silicone plug, and insert the power cord into the power input at the bottom of the control module.
2. Vertically insert the control module back into its base and plug it in.
3. Press the button on the control module to switch water dispensing modes.

Status Indicator Light (Top of Main Unit):

• Normal Mode: Solid blue light indicates continuous water flow.
• Intermittent Mode: Solid green light indicates intermittent flow. Water dispensing frequency can be customized in the App (default: 3 minutes dispensing, 3 minutes pause).

4.1.2 Unplug (powered by built-in battery)

When unplugged, the device operates on its built-in battery. In battery mode, switching water outlet modes is not available. The default setting dispenses water for 25 seconds every hour. Battery life is affected by dispensing frequency, which can be adjusted in the App's energy management settings.

1. Remove the control module and plug the power cord into its connector to charge the control module.
2. A solid blue or green light indicates full charging. Unplug the cord, cover the silicone plug, and reinsert the control module into the base.

Indicator Status:

• Fully Charged: The status indicator light is solid.
• Low battery: The indicator light flashes red. Plug in to charge the control module.

Note: To preserve battery life, water is pumped for 25 seconds per hour by default in battery mode. Water dispense frequency can be set in the PETKIT App's “Energy management” section. Frequent pumping may shorten battery life. Software optimizations may occur.

4.2 Indicator Description

The device features indicator lights on the control module:

• Filter Indicator: Flashing red indicates the filter needs replacement. Reset the indicator in the App after replacement.
• Water Shortage Indicator: Flashing red indicates low water level. The indicator will turn off after refilling the water.

Status Indicator Light Meanings:

• Plug in: Solid blue or green light indicates full charge. Flashing blue or green indicates charging. (Light color depends on dispensing mode.)
• Unplug: The green light stays on for 15 seconds and then turns off, extending working time.
• Low battery: The indicator light flashes red.
• Main Unit Failure: The light flashes blue and green alternately.

Note: When the control module is removed, the filter and water shortage indicators will be solid red. They will turn off once the control module is reassembled.

4.3 Device Binding

Connect the device to the PETKIT App for advanced control and monitoring.

1. Download and Install PETKIT App: Search for and download the PETKIT App from the App Store or Google Play.
2. Add the device: Open the PETKIT App, tap the '+' icon in the top right corner, and select “PETKIT EVERSWEET MAX (CORDLESS)” to add the device.
3. Connection: The App will initiate a connection with the device. Please wait for the connection to be successful.

Note: For an optimal user experience, keep the PETKIT App and device firmware updated.

05 FUNCTION DESCRIPTION

5.1 Power Supply Options

The device supports two power supply options:

• Plug it in: Allows for continuous flow and intermittent flow modes.
• Unplug (battery-powered): Only supports intermittent flow. Switching modes is not available in battery mode.

Plugged-in Operation: After Bluetooth connection, you can select between Standard Mode (continuous flow) and Intermittent Mode (customizable frequency) via the App. You can also pause water dispensing through the App.

Note: The device automatically resumes work after a 10-minute pause to ensure water is always available.

• Standard Mode: Dispenses water continuously.
• Intermittent Mode: Dispenses water intermittently. Frequency can be adjusted via energy management in the App.

5.2 Homepage of Device

The PETKIT App homepage provides:

• Data Synchronization: Refresh to get real-time data. Ensure Bluetooth connection and proximity to the device. For remote data, see Section 5.3.
• Do Not Disturb: Disables water dispensing when enabled.
• Energy Management: Displays filter life, purification times, and power consumption, which update based on usage.
• Drinking Records: Shows your pet's drinking history by date.

5.3 Interconnection

Interconnection allows remote control, water shortage notifications, and status checks. Connect the device to a master device (e.g., PETKIT self-cleaning cat litter box, PETKIT smart feeder) via Bluetooth. Ensure the master device is updated and within 8 meters with no signal obstructions.

Note: Devices like PETKIT FRESH ELEMENT smart pet feeder (P512) and PETKIT FRESH ELEMENT Mini smart pet feeder (P530) do not support interconnection.

06 CLEANING AND MAINTENANCE

Clean the water tank at least once a week and thoroughly once a month for healthy drinking water. Cleaning frequency may vary based on pet habits and water quality.

1. Remove the control module and the wireless base. Wipe them with a dry or slightly damp cloth. Do not immerse these parts in water.
2. Clean the lid, water tray, filter holder, water tank, outlet pipe, and wireless water pump.

⚠️ Caution: The wireless base and control module contain electronic components and should not be rinsed or soaked.

07 VIDEO GUIDE

For visual guidance:

• 7.1 Installation & Usage Video: Please copy and paste the following URL into your browser: https://youtu.be/hV9a_9ug4eE
• 7.2 Maintenance & Cleaning Video: Please copy and paste the following URL into your browser: https://youtu.be/lGwNxjT1qQg

08 BASIC SPECIFICATIONS

Disposal

In accordance with the European directive 2012/19/CE on Waste Electrical and Electronic Equipment (WEEE), this appliance should not be disposed of with unsorted municipal waste. Old appliances must be collected separately for optimal recovery and recycling. The crossed-out wheeled bin symbol on the product indicates that it must be collected separately. Consumers should contact their local authority or retailer for correct disposal information.

09 A MESSAGE TO OUR VALUED CUSTOMERS

• Thank you for choosing the PETKIT EVERSWEET MAX (CORDLESS).
• It is important to read and follow this User Manual before use. Installation or use implies acceptance of the safety instructions.
• PETKIT is not liable for accidents or injuries resulting from improper product use.
• PETKIT reserves the rights of interpretation and revision.

10 USER SAFETY GUIDE

* Failure to follow these safety guidelines may result in product malfunction or other issues.

• Install and use the product as instructed in this User Manual.
• This product is not recommended for pets under three months of age.
• The product is for indoor use only. Avoid direct sunlight exposure and keep away from open flames.
• Use only the original adapter to prevent device damage or safety hazards.
• Place the device on a level surface. Do not knock it over, as this may affect its function or cause water spillage.
• Do not rinse or soak the base and the control module.
• Avoid damaging the pump during cleaning and maintenance. Accidental drops may break the internal ceramic shaft, causing product damage.
• While the product operates on safe low voltage, pets chewing on wires may pose an electrical leakage risk. Secure and hide the power cord. If pets chew the cord, stop them promptly.
• Handle the product with care to prevent damage.
• If the product will not be used or moved for an extended period, unplug the power cord.
• Children should use this product under adult supervision.
• Repairs should only be performed by qualified professionals to ensure safety.
• Before leaving for an extended period, ensure there is sufficient water in the tank.
• If you encounter any issues, please contact PETKIT customer service for assistance.

FCC and IC Warnings

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

FCC Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device has been evaluated to meet general RF exposure requirements and complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

IC Warning (English): This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

IC Warning (French): Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.