Amazon Basics 5/8" Curtain Rod with Finials
Adjustable Length: 48" to 88" (122 cm - 224 cm)
Specifications
| Feature | Detail |
|---|---|
| Length | 48 - 88 inches (122 - 224 cm) |
| Diameter | 5/8" (1.6 cm) |
Important Safeguards
Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
When using the product, basic safety precautions should always be followed to reduce the risk of injury, including the following:
- The product must be fixed to a wooden, masonry, or concrete wall using the provided fasteners (hardware). The fixing point must be capable of supporting the weight of the product. For cavity walls or plasterboard, use fasteners (hardware) available at your local store.
- It is recommended that two competent adults fit this product.
- Use the product for hanging curtains only.
- When drilling holes, make sure that you do not damage any electrical cables or water pipes behind the wall. Use a voltage/metal detector if in doubt.
- Check and tighten the screw connections regularly.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Before First Use
- Check for transport damages.
⚠️ DANGER: Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.
Cleaning and Maintenance
Cleaning
- To clean, wipe with a soft, slightly moist cloth.
- Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
Parts Included
The following parts are included with your curtain rod:
- A: Curtain Rod (x1)
- B: Mounting Brackets (x3)
- C: Wall Anchors (x6)
- D: Screws (x6)
- E: Finials (x2)
Tools Needed
You will need the following tools for installation:
- Pencil
- Level
- Measuring Tape
- Drill
- Voltage/Metal Detector (recommended)
- Screwdriver
Required drill bit sizes:
- For anchors (C): Ø 15/64" (6 mm)
- For screws (D): Ø 1/8" (3 mm)
Installation Instructions
- Prepare Wall and Mount Brackets: Mark the desired positions for the brackets (B) on the wall, ensuring they are level. For solid walls (wood, masonry, concrete), drill pilot holes for screws (D) or anchors (C). For hollow walls or plasterboard, use appropriate anchors (C) and screws (D) suitable for your wall type, ensuring the mounting point can support the product's weight. Typically, brackets should be placed less than 4 inches (10 cm) from the edges of the window frame or corners.
- Attach Rod to Brackets: Place the curtain rod (A) onto the mounted brackets (B).
- Adjust Rod Length: Extend or retract the rod (A) to fit the desired window width. Ensure it is securely in place.
- Hang Curtains: Slide your curtains onto the rod (A).
- Secure Rod: Ensure the rod is stable and properly seated on the brackets.
- Weight Limit: The maximum recommended weight capacity for this curtain rod is 12 lbs (5.4 kg).
- Attach Finials: Screw the finials (E) onto the ends of the curtain rod (A).
Feedback and Help
Love it? Hate it? Let us know with a customer review.
AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.
- US/UK Reviews: amazon.com/review/review-your-purchases#
- US/UK Support: amazon.com/gp/help/customer/contact-us
