Amazon Basics Single(Long) Rod Set Instructions
Model Sizes: 36-72, 42-120, 44-120, 66-120, 77-120, 88-120, 72-144, 88-144, 120-170, 120-180 IN (91-172, 107-304, 112-304, 168-304, 195-304, 224-304, 183-366, 224-366, 304-431, 304-457 cm); 36-72, 48-84, 48-88 IN (91-182, 122-213, 122-224 cm)
Important Safety Instructions
Read these important safety instructions carefully before using and keep them for future reference.
- If you are unsure of any part of the process, contact a professional contractor or installer for assistance. Improper installation can result in injury or damage.
- Use and mount this product only according to the intended use and as described within these instructions. Misuse may lead to hazards resulting in damage and personal injuries.
- Examine the wall you want to install the mount to before you start installation. Make sure that there are not hidden power supply cables, gas pipes, water pipes, or other objects hidden in the wall that may be punctured during installation.
- For the installation, only use the tools listed below.
- Ensure to tighten screws and other connections well but do not over-tighten them. Never use an electric tool to tighten screws and nuts.
Parts and Tools Required
Parts:
- A (x6)
- B (x6)
- C (x3)
- D (x2)
- E (x2)
Tools:
- Screwdriver
- Drill
- 1/4 inch (6mm) drill bit
Diagram Description: Visual representation of all included parts and necessary tools for installation.
Installation Steps
Step 1: Measurement and Planning
Measure and mark the desired rod position on the wall. Ensure brackets are placed at appropriate intervals.
Diagram Description: Shows window dimensions (X, Y) and placement of mounting brackets (C) on the wall, indicating suitability for drywall or studs.
Step 2: Drilling Pilot Holes
Drill pilot holes into the wall at the marked bracket locations. For drywall, a 1 1/4 inch (32mm) drill bit is indicated for anchor installation (anchors not explicitly shown).
Diagram Description: Illustrates drilling pilot holes into the wall, with a specific drill bit size noted for drywall.
Step 3: Mounting Brackets
Attach the mounting brackets (C) to the wall using screws (A and B). Ensure secure attachment to either drywall (with appropriate anchors) or wall studs.
Diagram Description: Shows mounting brackets (C) being secured to the wall with screws (A+B), demonstrating installation into drywall and studs.
Step 4: Assembling the Rod
Join the rod sections (D and E) together to achieve the desired length. Attach the finials to the ends of the assembled rod.
Diagram Description: Depicts joining rod sections (D, E) and attaching finials to the ends of the curtain rod.
Step 5: Hanging the Rod
Hang the assembled curtain rod onto the wall-mounted brackets (C).
Diagram Description: Illustrates placing the assembled curtain rod onto the installed wall brackets.
Step 6: Securing the Rod
Secure the rod to the brackets to prevent it from dislodging.
Diagram Description: Shows the final securing of the rod to the brackets.
Step 7: Final Check and Usage
Ensure the rod is securely installed. The maximum weight capacity is 22 lbs (10 kg).
Diagram Description: Shows the installed rod with curtains, highlighting the weight limit of 22 lbs (10 kg).
Care Instructions
Clean with a soft cloth. Do not use abrasive cleaning agents, solvents, or polishes.
Consumer Information
Information regarding waste sorting for France is provided, directing users to a website for recycling information. ? https://quefairedemesdechets.fr
Manufactured in China.
