Amazon Basics Ultralight Sleeping Pad

Important Safety Precautions

Read these instructions carefully and keep them for future reference. If this product is passed on to a third party, these instructions must be included.

When using this product, basic safety precautions should always be followed to reduce the risk of injury, including the following:

• Children should not play with the product.
• Always use on a firm, level surface.
• Do not use this product if any parts are missing, damaged, or worn.
• Periodically examine the product for signs of wear. Stop using the product at the first sign of damage or if parts become detached.
• Do not use a mechanical air pump.
• Keep the product away from sharp objects such as rocks, small branches, thorns, and sharp surfaces.
• Keep pets or other animals away from the product.
• Keep the product away from flames, sparks, and chemicals, including sunscreen, chlorine, and insect repellent sprays.
• Do not use the product as a flotation device.

Product Description

The product is a sleeping pad with a built-in foot pump for inflation and a deflation valve.

Key components:

• Sleeping Pad
• Internal Foot Foam Pump
• Inflation Valve (part of the foot pump)
• Deflation Valve
• Storage Bag

Before First Use

A DANGER Suffocation Risk! Keep packaging materials out of reach of children and pets. These materials can be a source of danger, such as suffocation.

• Remove all packaging materials.
• Check the product for any damage that may have occurred during transport.

Usage

Inflating the Sleeping Pad

1. Turn the sleeping pad over so that both air valves are facing upwards.
2. Open the valve of the internal foot foam pump (Fig. 1).
3. Place one foot on top of the internal foot foam pump valve and the internal foot foam pump itself (Fig. 2).
4. Press straight down to push air into the sleeping pad. The sole of your foot should completely cover the valve opening as you press down.
5. Slightly lift your foot off the valve and the internal foot foam pump to allow air to enter the pump as the foam expands.
6. Continue to pump rapidly with your foot until the sleeping pad is inflated to your desired firmness (Fig. 2). Do not overinflate.
7. Close the cover of the internal foot foam pump (Fig. 3).

Deflating the Sleeping Pad

1. Turn the sleeping pad over so that both air valves are facing upwards.
2. Open the deflation valve to let the air out (Fig. 4).
3. Open the valve of the internal foot foam pump. Compress the foam to expel excess air. Close the pump valve to keep the foam compressed.
4. Starting from the internal foot foam pump, roll the sleeping pad towards the deflation valve. As you roll, use your hand to push the air out of the sleeping pad.
5. Once the air is expelled, unroll the sleeping pad, then fold it for storage.

Cleaning, Storage, and Maintenance

Cleaning

• Inflate the product before cleaning and ensure all valves are sealed. Spot clean with a damp cloth to remove stains or residue as needed.
• Do not store the product while it is wet.
• Do not wash the product in a washing machine.
• To clean the product, wipe with a soft, slightly damp cloth.
• Never use corrosive cleaners, wire brushes, scouring pads, metal or sharp utensils to clean the product.

Storage

• Store the product in the storage bag when not in use.

Folding for Storage

1. Deflate the sleeping pad.
2. Fold the internal foot foam pump, then fold the sleeping pad in thirds lengthwise (Fig. 5).
3. Roll the sleeping pad starting from the internal foot foam pump towards the deflation valve (Fig. 6).
4. Place the sleeping pad into the storage bag.

Maintenance

• Store the product in a cool, dry place, out of reach of children and pets, preferably in its original packaging.

Product Disposal

Dispose of the product in accordance with local regulations. If in doubt, consult your local authorities.

Specifications

• Net Weight: Approx. 1.4 lbs (0.63 kg)
• Dimensions (L x W x H): Approx. 74.8 x 22.4 x 2.2 inches (190 x 56.9 x 5.6 cm)
• Materials: 100% Polyester with TPU coating
• Valve Material: TPU