Amazon Basics Adjustable Shower Curtain Tension Rod

Important Safety Instructions

Read these important safety instructions carefully before using and keep them for future reference.

Professional Assistance

If you are unsure of any part of the process, contact a professional contractor or installer for assistance. Improper installation can result in injury or damage.

Intended Use

Use and mount this product only according to the intended use and as described within these instructions. Misuse may lead to hazards resulting in damage and personal injuries.

Available Sizes

• 24-36 inches (61-91 cm)
• 36-54 inches (91-137 cm)

Installation Guide

Step 1: Extend to Fit the Space

Extend the rod to the width of the space you intend to use it in. The rod is designed to be adjustable to fit various shower or bathtub openings.

Diagram Description: The first step shows the rod being extended horizontally between two vertical surfaces, like walls. Arrows indicate the rod expanding outwards.

Step 2: Extend Further for Tension

Extend the rod an additional 1-2 inches (2.5-5 cm) beyond the wall width. This extra length is crucial for creating the necessary tension to hold the rod securely.

Diagram Description: The second step illustrates the rod extended slightly past the wall boundaries. Dashed lines mark the wall edges, and arrows show the rod's extension beyond these limits.

Step 3: Install with Tension

Press the spring-loaded tube inwards while simultaneously pushing the rod against the wall. This action compresses the internal spring mechanism, preparing it to exert outward pressure.

Diagram Description: The third step depicts hands applying pressure to the rod against the wall. An arrow indicates the inward movement of the rod's internal, spring-loaded component.

Step 4: Release and Secure

Once the rod is in place and the spring is compressed, release the pressure. The tension from the compressed spring will hold the rod securely in position between the walls.

Diagram Description: The fourth step shows the rod successfully installed and held firmly in place. A checkmark symbol (✔️) indicates a secure and correct installation.

Care Instructions

Clean with a soft cloth. Do not use abrasive cleaning agents, solvents, or polishes.