Certification Statement
This is to certify that the undernoted product(s) has/have been tested with satisfactory results in accordance with the relevant requirements of the Lloyd's Register Type Approval System.
Manufacturer Details
Manufacturer: Hilti Corporation
Address: Feldkircherstrasse 100, 9494 Schaan, Liechtenstein
Places of Production
-
Company: Daepac Industries Sdn. Bhd. (415215-U)
Address: No. 10, Jalan Gemilang 5, Taman Perindustrian Gemilang, Ulu Tiram, Johor, 81800, Malaysia -
Company: Hilti Corporation
Address: Feldkircherstrasse 100, 9494 Schaan, Liechtenstein -
Company: WP-Wörgartner Produktions-GmbH
Address: Bahnhofstrasse 21, Oberndorf / Tirol, 6372, Austria -
Company: Ningbo World Broad Hardware & Electrical Co. Ltd.
Address: No. 139 Xinyang Road, Ditang Town, Yuyao City, Ningbo City, Zhejiang, 315491, China
Product Information
Type: Building Construction Elements
Description: New Generation Hilti X-BT-GR, X-BT-MR, X-BT-ER Threaded Fastener, X-FCM-R & X-FCS-R Grating Fastener.
Trade Name: Hilti X-BT Direct Mechanical System
Application and Standards
Application: Marine, Offshore & Industrial
Specified Standard: New generation Hilti X-BT-GR, X-BT-MR and X-BT-ER Threaded Fastener Specification & Hilti X-BT-ER Data sheet & Hilti Direct Fastening Technology Manual for Grating Fasteners; EUROCODE 3
Ratings: See Appendix
Conditions and Validity
Other Conditions: This Type Approval certificate is to be read in conjunction with submitted Technical Report on the supplementary design documents.
The minimum strength of the base material is to be as stated in the Hilti X-BT-GR, X-BT-MR and X-BT-ER Threaded Fastener Specification.
This certificate is not valid for equipment, the design, ratings or operating parameters of which have been varied from the specimen tested. The manufacturer should notify Lloyd's Register EMEA of any modification or changes to the equipment in order to obtain a valid Certificate.
Previous Version: LR2435310TA
The Design Appraisal Document LR2435310TA-02 and its supplementary Type Approval Terms and Conditions form part of this Certificate.
Appendix
Fastener Specifications
X-BT-GR
- Sizes: M8/7 SN8
- Shank & thread: S31803
- SN washer: S31635
- Sealing washer: Elastomer
- Guide sleeve: Plastic
- Nuts & washers: A4/AISI grade 316
- Purpose: Grating
X-BT-MR
- Sizes: M10/15 SN8, W10/15 SN8, M8/14 SN8, M6/10 SN8, W6/10 SN8
- Shank & thread: S31803
- SN washer: S31635
- Sealing washer: Elastomer
- Guide sleeve: Plastic
- Nuts & washers: A4/AISI grade 316
- Purpose: Multi-purpose
X-BT-ER
- Sizes: M10/7 SN8, W10/7 SN8, M8/7 SN8, M6/3 SN8, W6/3 SN8
- Shank & thread: (Not specified in this table)
- SN washer: (Not specified in this table)
- Sealing washer: (Not specified in this table)
- Guide sleeve: (Not specified in this table)
- Nuts & washers: (Not specified in this table)
- Purpose: Electrical Connection
Adapter types for X-BT-ER Fasteners
| Adapter | Material |
|---|---|
| M8-MR 50 | Stainless Steel, (X5CrNiMo17-12-2), 1.4401-AISI 316 OR Copper Alloy, tin coated, CuSn8 |
| M8-MR 75 | |
| M8-MR 100 | |
| M10-MR 50 | Stainless Steel, (X5CrNiMo17-12-2), 1.4401-AISI 316 OR Copper Alloy, tin coated, CuSn8 |
| M10-MR 75 | |
| M10-MR 100 | |
| W10-MR 50 | Stainless Steel, (X5CrNiMo17-12-2), 1.4401-AISI 316 OR Copper Alloy, tin coated, CuSn8 |
| W10-MR 75 |
Lloyd's Register Group Limited Disclaimer:
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Reference: GTSO/GED/MCH/JW/TSO/25-036667
Document Version: TA01 2.0
