Hilti X-FCM-F L Fastener System

Document Number: 2355498-2025.07.23

Product Information and Certifications

Manufacturer: Hilti AG, LI-9494 Schaan

Product Designation: Hilti-DX-DoP-013

ETA Approval: ETA-24/0018

EAD: EAD 333037-00-0602

CPR Reference: 0672, 0672-CPR-1057

Application: Grating and checker plate fasteners

Website: www.hilti.group

Approvals and Marks:

CE Mark [CE Mark]
ETA Approval [ETA Approval]
ABS Approved Product [ABS Approved Product]
DNV Certified [DNV Certified]
Bureau Veritas Certified [Bureau Veritas Certified]

Installation Guide

Step 1: Fastener Placement

Visual Description: A diagram showing the Hilti X-FCM-F L fastener being installed into a substrate. The fastener secures grating or checker plates. A magnified view shows multiple fasteners correctly positioned.

Step 2: Compatible Fasteners

The following Hilti fasteners are compatible with the X-FCM-F L system:

X-BT-GR M8/7 SN 8
S-BT-GF M8/7 AN 6 HL
S-BT-GR M8/7 SN 6 HL
X-ST-GR M8/10 P8

Step 3: Installation Process

Visual Description: A person is shown installing a fastener using a tool. Icons indicate safety precautions and environmental considerations: [safety-helmet], [safety-glasses], [outdoor-use], [indoor-use]. A distance indicator shows [distance-indicator] (1-10 km).

Step 4: Torque and Verification

Visual Description: A diagram illustrating the final installation step. A torque wrench symbol [torque-wrench] indicates the required installation torque: Tinst ≥ 5 Nm (3.7 ft-lbs). Checkmarks [correct-installation] signify correct installation, while 'X' marks [incorrect-installation] indicate improper installation.

Additional visual cues include [visual-inspection] and [important-note].

Additional Resources

For more information on corrosion protection, refer to the: Hilti Corrosion handbook / DFTM.

	Hilti X-FCM-R NG Calibration and Application Guide Comprehensive guide detailing the calibration and application procedures for the Hilti X-FCM-R NG fastening system, including safety information, component lists, and step-by-step instructions.
	Hilti X-FCM-R HL Installation Guide and Specifications Comprehensive guide for installing the Hilti X-FCM-R HL component. Includes usage conditions, compatible parts, installation steps, and torque specifications.
	Hilti X-BT Fastener Type Approval Certificate by Lloyd's Register Official Type Approval Certificate from Lloyd's Register for Hilti X-BT-GR, X-BT-MR, X-BT-ER Threaded Fasteners and X-FCM-R, X-FCS-R Grating Fasteners, covering Building Construction Elements for Marine, Offshore & Industrial applications.
	Hilti TS-BT 31-74 PFP Removal Drill Bit S-BT HL (+ S-DG) Operating Instructions Comprehensive operating instructions for the Hilti TS-BT 31-74 PFP removal drill bit and S-BT HL standoff adapters, detailing preparation, drilling procedures, and component usage with safety guidelines.
	Hilti X-BT Fastener System: ABS Product Type Approval Certificate Official American Bureau of Shipping (ABS) confirmation of type approval for Hilti X-BT-GR, X-BT-MR, and X-BT-ER threaded fasteners used in marine and offshore structures. Details specifications, intended service, and validity.
	Hilti X-BT-MR M8 Operating Instructions and Technical Guide Detailed operating instructions, safety guidelines, and technical specifications for the Hilti X-BT-MR M8 threaded stud system, including usage with various Hilti tools and accessories for structural steel applications.
	Hilti S-BT-ER HL & S-BT-EF HL Threaded Studs Datasheet Detailed datasheet for Hilti S-BT-ER HL and S-BT-EF HL screw-in threaded studs, covering technical specifications, materials, performance data, and installation guidelines for electrical connections and lightning protection.
	HILTI DX 6 Powder-Actuated Tool Data Sheet and Accessories Comprehensive data sheet for the HILTI DX 6 powder-actuated tool, detailing tool variants, compatible fastener guides, pistons, fasteners, cartridges, and accessories.