Vornado Velocity 1R Personal Heater Owner's Guide

Our Commitment

Vornado aims for product perfection. If you are not satisfied, Vornado will make it right.

Contact Vornado:

• Website: vornado.com
• Phone: 800.234.0604
• Email: help@vornado.com

Important Safety Instructions

This owner's guide is part of the product and contains vital information on safety, use, and disposal. Familiarize yourself with all operating and safety instructions. Keep these documents for future reference and pass them on with the product.

Intended Use

This product is designed to heat and circulate air in indoor living spaces only. It is not intended for commercial or industrial use, nor for bathrooms, laundry areas, or damp locations. The manufacturer is not responsible for damage or injury due to unauthorized use or product modification. Failure to follow these directions voids the warranty.

General Warnings

When using electrical appliances, always follow basic precautions to reduce the risk of fire, electric shock, and injury:

Risk to Children and Impaired Persons

Extreme caution is required during installation, operation, cleaning, and maintenance by or around children 12 years of age and younger, or individuals with reduced physical, sensory, or mental capabilities. Children should be supervised to ensure they do not play with the appliance, its parts, or packaging.

Installation Warnings

• Do not use in areas where gasoline, paint, or flammable liquids are used or stored, as the heater has hot and sparking parts.
• Do not use in an RV, boat, or any application where battery power is converted to AC power.
• Place the product at least 3 feet away from electrical outlets, furniture, pillows, bedding, papers, clothes, curtains, and other flammable objects. Keep away from beds, as objects like pillows or blankets can fall off and ignite.
• Operate only in the upright position.
• Do not place the heater on soft surfaces (like a bed) where air intakes or exhaust can be blocked.
• Keep the product away from furnaces, fireplaces, stoves, or other high-temperature heat sources. Do not use in a window, on uneven surfaces, or near water.
• Ensure the appliance, power supply, cord, and plug do not contact water. Do not use on wet surfaces, in a bathtub, shower, or where it might fall into water containers (bathtub, laundry, pool).
• Do not use this product outdoors or expose it to weather or elements.
• Do not run the cord under carpeting, cover it with rugs, or route it under furniture or appliances. Arrange the cord away from traffic areas to prevent tripping. Ensure the cord does not hang over edges or get crimped. Place the appliance near an easily accessible outlet for quick unplugging in emergencies.
• Do not modify the product with any aftermarket accessory.

Safe Use Warnings

• Use the heater only as described in this manual. Unauthorized use may cause fire, electric shock, or injury.
• Exercise extreme caution when the heater is in operation. Always unplug when not in use. Vornado does not recommend unattended or unsupervised use.
• The heater surfaces are hot during use. Avoid bare skin contact with hot surfaces. Use handles when moving the heater.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or power strip. Do not use on surge-protected or GFCI outlets.
• Verify that the electrical information on the rating label (including voltage) is compatible with your power supply before plugging in.
• To reduce the risk of circuit overload, fire, and electric shock, do not operate with solid-state speed devices (like dimmer switches) or on the same circuit as other high-energy products (vacuum cleaners, blenders, fans, saws). Do not use with an automatic timer, as it may disable the thermal cutout safety feature.
• Do not operate any heater with a damaged cord or plug, or if it has malfunctioned, been dropped, or damaged. Discard the heater or return it to a Vornado authorized service facility for examination/repair.
• Do not sit or stand on the product.
• Never use the cord as a handle or yank, strain, or stretch it.
• Do not insert foreign objects into ventilation or exhaust openings, as this can cause electric shock, fire, or damage.
• Check heater cord and plug connections. A loose outlet can cause overheating or fire. Ensure the plug fits tightly. Check frequently for heat; if hot, discontinue use and have the outlet replaced by a qualified electrician.
• Never ignore signs of electrical problems (warm outlet plates, sparks, flickering lights). Immediately turn off and unplug the appliance. Contact a qualified electrician to investigate before operating again.
• Note: Heaters draw more current than small appliances; overheating may occur even if it hasn't with other appliances.
• The appliance has a polarized plug (one blade wider than the other) for reduced electrical shock risk. It fits a polarized outlet one way. If it doesn't fit fully, reverse the plug. If it still doesn't fit, contact a qualified electrician. Do not attempt to defeat this feature.
• Before moving, servicing, cleaning, or when not in use, turn off the power and unplug the unit. Grasp and pull only the plug to disconnect. Power off and unplug if leaving unattended or during electrical storms.
• If the heater suddenly stops working:
  • The heater has a thermal cutout safety feature that shuts it off when overheating is detected. Refer to the "RESET HEATER" instructions.
  • If the heater and other electrical products stop working simultaneously, your circuit breaker or fuse may have tripped due to overload. Consider using the "low" setting, running only one heater at a time, unplugging other appliances, or hiring an electrician to install an additional circuit.

Servicing Warnings

• Clean the product regularly as instructed. Turn off and unplug before cleaning. Do not use gasoline, thinners, solvents, ammonia, or other chemicals for cleaning. Refer to CLEANING instructions.
• Do not open the appliance housing while plugged in. For safety, all service and repairs must be done by a Vornado Authorized Service Center.

FCC Consumer Advisement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with Class B digital device limits per Part 15 of FCC Rules, providing reasonable protection against harmful interference in residential installations. It generates, uses, and radiates radio frequency energy. If not installed/used per instructions, it may cause radio communication interference. No guarantee exists that interference will not occur in a particular installation. If interference occurs (determined by turning the equipment off/on), users are encouraged to try correcting it by:

• Reorienting or relocating the receiving antenna.
• Increasing separation between the equipment and receiver.
• Connecting the equipment to an outlet on a different circuit than the receiver.
• Consulting a dealer or experienced radio/TV technician.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Supplier's FCC Declaration of Conformity

Unique Identifier: Vornado Model Velocity 1R

Responsible Party: Vornado Air LLC

Mailing Address: 415 E. 13th St., Andover, KS 67002

Contact: www.vornado.com

Safety Features

Cool Touch Case: Safe to touch, even on high heat setting.

Automatic Safety Shut-Off System: If airflow becomes blocked, power to the heater is shut off to prevent overheating.

Finger-Friendly Design: Resists curious fingers.

WARNING - BURN HAZARD: The front grille is a hot surface. Avoid contact while the heater is in use or cooling down.

[Tip-Over Warning]: If the heater tips over, the safety shut-off system cuts power. Position the heater back in the upright position to restore power.

Controls

POWER - MODE [power-button]: Cycles through High Heat (750 watts), Low Heat (375 watts), Fan Only, and Power Off.

TIMER [timer-button]: Sets the heater to automatically power off.

How to Use

Before use, check the appliance for visible damage. Do not use if damaged. Contact Vornado Air LLC at 1-800-234-0604 if damage is found.

1. Use the integrated handle on top for lifting and carrying.
2. Position the heater so airflow is not obstructed.
3. Plug the power cord into a standard grounded wall outlet.
4. Press the power button [power-button] to turn the unit on and select a mode. Each press cycles through High (red LED), Low (yellow LED), or Fan Only (white LED). Press the power button [power-button] again to turn the unit off.
5. Set the timer to automatically power off the heater in 4 hours by pressing the timer button [timer-button]. The white timer indicator light will illuminate. Press the timer button [timer-button] again to cancel the timer.

When turning the unit off by pressing the power button [power-button], it will run in fan-only mode to remove excess heat before shutting off. The fan-only icon will flash during this countdown.

Cleaning

Regular cleaning is necessary as the heater moves a substantial amount of air. Cleaning the exterior is recommended weekly. For service, return the heater to Vornado (see WARRANTY).

1. Unplug the heater before cleaning.
2. Use a brush attachment on a household vacuum cleaner to remove accumulated dust from the Inlet Grille on the back of the heater.
3. Use a brush attachment on a household vacuum cleaner to remove accumulated dust from the Front Outlet Grille.
4. Wipe down the entire heater with a soft, dry cloth.

Note: Do not modify the product with any aftermarket accessory.

[Tip]: Periodically blow out the heater with pressurized air to keep the heat element and motor clear of dust, hair, and debris. This also eliminates odors caused by particle accumulation.

Storage

During the off-season or after extended non-use, store your heater to ensure its longevity.

[Tip]: Cleaning is recommended before storage.

1. Unplug the power cord and bundle it loosely.
2. Cover the heater or place it back in its original retail carton if available to prevent dust accumulation.
3. Store the heater in a cool and dry location.

Disposal

Dispose of all packaging materials in an environmentally responsible manner.

Reset Heater

Resetting Your Vornado Heater

Your Vornado Heater has a multilevel safety shut-off system to prevent overheating. Overheating can occur if inlets or outlets are blocked. If this happens, the safety shut-off system cuts power, and you must manually reset the heater.

1. Power the heater off, then unplug the power cord.
2. Remove any obstructions.
3. Wait 5-10 minutes for the heater to cool down.
4. Plug in the power cord and place the heater in the desired position.
5. Power the heater On. It should now function normally.

Note: If the safety shut-off system repeatedly shuts off the heater or fails to reset, contact Vornado Consumer Services at 1-800-234-0604.

Troubleshooting

Warranty

Vornado Air LLC warrants this Personal Heater to be free from defects in material or workmanship for three (3) years from the date of purchase. Vornado will repair or replace the product at no cost if a defect is discovered within the warranty period.

For Warranty or Repair Service:

Call 1-800-234-0604 or email help@vornado.com to obtain a Return Authorization ("RA") form. Provide your Product's model number, serial number, name, address, city, state, Zip code, and phone number.

Shipping Your Product for Service:

After receiving the RA form, ship your Product to: Vornado Air LLC Attn: Warranty & Repair, 415 East 13th Street, Andover, KS 67002. Ensure packages are clearly marked with the RA number. Allow 1-2 weeks for repair and return.

Repairs not covered by warranty or outside the warranty period will incur a fee for materials, labor, handling, and shipping.

Warranty Exclusions:

This warranty does not apply to defects resulting from abuse, modification, alteration, mishandling, improper maintenance, commercial use, or unauthorized repair/service. It also does not cover damages from shipment or acts of God. Improper product use, including external devices altering voltage/frequency or shipping to unintended countries, voids warranties. Unauthorized modifications or use of non-approved parts are not recommended and not covered. Warranty is honored only for models used in the intended country.

Limitation of Liability:

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY. VORNADO IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS WARRANTY. Some states may not allow limitations on implied warranties or consequential damages.

This warranty gives specific legal rights, and other rights may vary by state. The manufacturer assumes no responsibility for damage or injury caused by failure to follow instructions, improper use, or unauthorized modifications.

All company names and product names are trademarks of their respective owners. © All rights reserved. Technical information and instructions correspond to the latest available information at time of printing. Contents may differ slightly from the actual product.

© 2021 Vornado Air LLC Andover, KS 67002. U.S. Patent pending. Specifications subject to change without notice. Vornado® is a trademark owned by Vornado Air LLC.

Designed, engineered, and supported in USA.