V380 Pro Smart Camera

Download

Search for "V380 Pro" in the APP Store or scan the QR code below to download and install the V380 Pro APP.

[Image Description: A QR code is displayed for downloading the V380 Pro APP.] Scan the QR code to download the V380 Pro APP.

Electronic manual: Use the V380 Pro APP to scan the QR code on the camera to add the device and follow the instructions to view the electronic manual of the device.

Preparations before network distribution

1. Open the APP, click on the account registration, enter the mobile phone number or email address, obtain the verification code, set the account password, and complete the registration.
2. Click the "➕ Add device" button (typically found in the upper right corner), and scan the QR code on the body of the machine with your mobile phone.

[Image Description: Screenshots of the V380 Pro APP interface showing the "My home" screen, the "Add device" screen with a QR code scanner, and a progress indicator for searching for nearby devices.]

After scanning the QR code on the device, please select the corresponding network configuration method according to your network configuration interface.

Solar-powered camera indicator light (Wi-Fi camera)

• ⚫ Indicator is off: Device is powered off or in standby mode.
• ? Slow flashing red light: Device is ready for connecting.
• ? Quick flashing red light: Device is connecting to the router.
• ? Solid yellow light: Device has been connected to the Internet.
• ? Flashing yellow light: Device is connecting to the Internet. If the device cannot connect to the Internet normally, please check whether the router can access the Internet normally.

Network Connection Methods

Bluetooth network connection

Note: Turn on your phone's Bluetooth before you add a camera.

1. Connect your mobile phone to 2.4GHz Wi-Fi first.
2. Confirm the connected Wi-Fi and enter the password.

[Image Description: Screenshots of the V380 Pro APP showing the Bluetooth connection process, including "Add device", "Connecting to the device...", and "Add success" screens.]

3. The device will prompt "Network configuration received, connecting". Please be patient when using the device for the first time.

4. After the device prompts "Network connected" and "Bind successfully, camera ready", it means that the device has connected to the network and is successfully added.

QR code network connection

1. Please select the Wi-Fi that the device needs to connect to, and enter the correct password.

Note: The device only supports 2.4GHz WiFi. Please select Wi-Fi without "5G". The name of Wi-Fi should not contain special symbols.

2. The APP will generate the QR code and then use the camera to scan this QR code.

[Image Description: A diagram showing a V380 Pro camera and a hand holding a smartphone displaying a QR code, with an indicator showing the recommended scanning distance of 15cm to 30cm. Also includes screenshots of the APP's QR code connection setup process.]

3. After the device identifies the QR code successfully, it will prompt "Network configuration received, connecting". Please be patient when using the device for the first time.

4. After the device prompts "Network connected" and "Bind successfully, camera ready", it means that the device has connected to the network and is successfully added.

AP hotspot connection

The device also supports the "AP hotspot connection". Please ensure the device has been reset.

1. Click the "➕" button in the upper right corner, swipe up the bottom, and select "Wi-Fi Camera" > "AP hotspot connection".
2. Select the Wi-Fi that the device needs to connect to, and enter the correct password. (For iOS, if you want to connect to other Wi-Fi, please connect your mobile phone to the Wi-Fi you need and then return to the APP to refresh).
3. Connect to the hotspot of the device based on APP instructions.

[Image Description: Screenshots of the V380 Pro APP showing the AP hotspot connection process, including selecting Wi-Fi, connecting to the AP hotspot, and phone settings showing connection to a Wi-Fi network starting with "HSC".]

4. Enter the four-digit numbers prompted by the voice of the device in turn to add the device.

5. After the device prompts "Network connected" - "Bind successfully, camera ready", it means that the device has connected to the network and is successfully added.

Adding completed

After the camera prompts "Network connected" - "Bind successfully, camera ready", you can create a group for the camera and set the name.

[Image Description: Screenshots of the V380 Pro APP showing the "Add success" screen, where users can select or enter a device name and choose from predefined locations like "Home", "Office", "Bedroom", etc., or set a custom name, followed by "Finish" or "Skip" options.]

Attentions

1. Concerning Micro SD card recording, when the recording capacity reaches the upper limit, the earliest recording file of the recording event will be automatically overwritten.
2. Long-term use in unconventional environments (high temperature, high humidity, large amounts of dust or smoke, etc.) may damage the camera.
3. V380 Pro APP and device firmware will be updated from time to time. For your best experience, please update the APP and upgrade the device firmware in time.

Cloud service

You can enjoy these special functions after subscribing to the cloud service on the [Cloud] interface of the V380 Pro APP.

• ☁️ Cloud storage
• ⏩ Speed up playback
• ? Alarm recording
• ♾️ Check at any time
• ? Security encryption
• ? Loop video recording

Cloud service is a value-added service that requires payment.