Aerocool Delta RGB LIGHTING RGB Mid Tower Case Installation Guide
Save Money. Build Better.
This guide provides instructions for installing components into the Aerocool Delta RGB LIGHTING RGB Mid Tower Case.
Front I/O Cable Connection
Connect the front panel connectors to the motherboard. Please refer to the motherboard's manual for specific pinouts.
Connectors include: POWER SW [power switch], HDD LED [hard drive activity light], POWER LED [power indicator light], RESET SW [reset switch], SATA, USB, HD AUDIO [high-definition audio].
Accessory Bag Contents
Note: Specifications may vary depending on your region. Contact your local retailer for more information.
| Item | Quantity |
|---|---|
| SSD Screw | x17 |
| MB Screw | x17 |
| PSU Screw | x6 |
| PCI Screw | x6 |
| HDD Screw | x8 |
| MB Standoff | x6 |
Installation Guide
Step 1: Install Motherboard
Place the motherboard into the PC case, aligning it with the standoffs. Secure the motherboard using screws.
Ensure proper connection of the front panel headers (M/B F-PANEL) to the motherboard.
Step 2: Install PSU
Slide the Power Supply Unit (PSU) into its designated bay within the case and secure it with screws.
Step 3: Install Add-on Card
Install expansion cards, such as graphics cards or network cards, into the appropriate PCI-e slots on the motherboard. Secure the card bracket to the case.
Step 4: Install 3.5" HDD
Mount a 3.5-inch Hard Disk Drive (HDD) into the drive bay. Secure the HDD using screws.
Diagram (4a) & (4b) shows:
- Part A: Identify the drive bay or bracket.
- Part B: Insert the 3.5" HDD into the bay/bracket.
- Part C: Secure the HDD with screws.
Step 5: Install 2.5" SSD
Mount a 2.5-inch Solid State Drive (SSD) into its designated mounting location. Secure the SSD using screws.
Diagram (5a) & (5b) shows:
- Part A: Identify the SSD mounting bracket or bay.
- Part B: Attach the 2.5" SSD to the bracket or bay.
- Part C: Secure the SSD with screws.
Step 6: Install Fans
(6a) Install Front Fans
Attach fans to the front panel of the case for intake airflow.
(6b) Install Top Fans
Attach fans to the top panel of the case for exhaust airflow.
(6c) Install PSU Fans
Install fans in the PSU shroud area or near the PSU bay for additional airflow. (Note: These fans may not be included with all models).
(6d) Install Rear Fan
Attach a fan to the rear panel of the case for exhaust airflow.
Step 7: Install Rear Radiator
Mount a radiator (for liquid cooling systems) to the rear panel of the case.
I/O Panel
The front panel I/O ports provide convenient access to essential functions:
- Power LED: Indicates system power status.
- Power Control Button: Turns the system on/off.
- USB 2.0: Standard USB ports for peripherals.
- HD Audio & Mic: Connect headphones and microphones.
- USB 3.0: High-speed USB ports for faster data transfer.
Note: Specifications may vary depending on your region. Contact your local retailer for more information.
