AeroCool FLO Computer Case

Installation Guide

Front I/O Panel Cable Connection

Connect the front panel cables from the computer case to the corresponding headers on the motherboard. Refer to your motherboard's manual for precise pin assignments. The cables typically include:

RESET SW: For the reset button.
POWER SW: For the power button.
H.D.D LED: For the hard drive activity indicator.
POWER LED +/-: For the power indicator light.
HD AUDIO: For front panel audio jacks.
USB: For standard USB ports.
USB 3.0: For faster USB 3.0 ports.

Accessory Bag Contents

The accessory bag contains the necessary hardware for installation:

Screws:
- SSD Screw
- MB Screw (Motherboard Screw)
- HDD Screw
- PSU Screw (Power Supply Unit Screw)
- PCI Screw (for expansion cards)
Cable Tie: For managing internal cables.

Component Installation Guide

(1) Install Motherboard

Mount the motherboard inside the computer case. Ensure it is properly aligned with the standoffs and secure it using the appropriate screws (MB Screw). Connect essential cables like front panel connectors, USB, and audio to the motherboard headers.

Diagram Description: Shows a motherboard being placed into the case, aligning with standoffs, and connection points for front panel headers, USB, and audio are highlighted.

(2) Install PSU

Install the Power Supply Unit (PSU) into its designated bay within the case. Secure it with PSU screws. Connect the necessary power cables to the motherboard and other components.

Diagram Description: Illustrates the PSU being slid into its mounting location in the case and secured with screws.

(3) Install Add-on Card

Insert expansion cards, such as a graphics card or network card, into the available PCI-e slots on the motherboard. Remove the corresponding expansion slot cover from the case and secure the card with a PCI screw.

Diagram Description: Shows an expansion card being inserted into a motherboard slot and then secured to the case chassis.

(4) Install 3.5" HDD

Install up to two 3.5-inch Hard Disk Drives (HDDs). Slide the HDDs into their respective drive bays or trays and secure them with HDD screws. Ensure proper alignment for airflow and cable connections.

Diagram Description: Depicts two 3.5-inch HDDs being mounted into drive bays within the case, likely using screws or a tool-less mechanism.

(5) Install 2.5" SSD

Install up to two 2.5-inch Solid State Drives (SSDs). Mount the SSDs in their designated locations, typically using SSD screws or specific mounting brackets. These are often placed behind the motherboard tray or in dedicated bays.

Diagram Description: Shows two 2.5-inch SSDs being installed in their mounting positions within the case.

(6) Install Radiator

Front Radiator Installation: Mount a radiator to the front of the case, typically behind the front fan mounts. Ensure correct fan and radiator orientation for airflow. Use appropriate screws.

Rear Radiator Installation: Mount a radiator to the rear of the case, usually in place of a rear exhaust fan. Ensure it fits correctly and is secured.

Diagram Description (Front Radiator): Illustrates a radiator being attached to the front mounting points of the case, with arrows indicating airflow.

Diagram Description (Rear Radiator): Shows a radiator being installed at the rear of the case, replacing a fan mount.

(7) Install Fans

Front Fans Installation: Mount fans to the front of the case to draw cool air in. Ensure correct airflow direction (intake). Use screws to secure the fans to the case frame or radiator.

Rear Fans Installation: Mount fans to the rear of the case to exhaust hot air. Ensure correct airflow direction (exhaust). Use screws to secure the fans.

Diagram Description (Front Fans): Shows fans being attached to the front of the case, oriented for intake.

Diagram Description (Rear Fans): Shows fans being attached to the rear of the case, oriented for exhaust.

Front Panel Connectors Summary

The front panel of the case provides convenient access to essential ports:

Power Button
Reset Button
USB 3.0 Ports
USB 2.0 Ports
HD Audio & Microphone Jacks

Note: Specifications may vary depending on your region. Contact your local retailer for more information.

	Aerocool AirHawk / NightHawk PC Case Installation Guide A comprehensive guide for installing components into the Aerocool AirHawk and NightHawk PC cases, covering motherboard, PSU, storage drives, expansion cards, and cooling solutions.
	Aerocool Streak PC Case Installation Guide and Manual Comprehensive installation guide for the Aerocool Streak Miditower PC case. Learn how to install your motherboard, PSU, storage drives, expansion cards, and manage front panel connections.
	Aerocool CS-107 Mini Tower Case Installation Guide Comprehensive installation guide for the Aerocool CS-107 Mini Tower PC Case. Learn how to install your motherboard, power supply unit (PSU), storage drives (SSD/HDD), expansion cards, fans, and radiators. Includes front panel I/O setup and bag contents.
	AeroCool Rift BG Computer Case Installation Guide Step-by-step guide for installing the AeroCool Rift BG PC case, covering front panel connections, accessory components, and the installation of motherboards, PSUs, add-on cards, 3.5" HDDs, 2.5" SSDs, and fans.
	Aerocool Aero-300 PC Case Installation Guide A comprehensive guide for installing components into the Aerocool Aero-300 PC case, covering PSU, motherboard, ODD, HDD, SSD, and fan installations.
	Aerocool Python PC Case Installation and User Guide Comprehensive guide for installing the Aerocool Python PC case, covering front panel connections, component installation (motherboard, PSU, drives, cards), fan and radiator mounting, and RGB fan hub setup.
	AeroCool CS-110 Mini Tower Case Installation Guide Detailed installation guide for the AeroCool CS-110 Mini Tower Case. Learn how to install your motherboard, power supply unit (PSU), storage drives (HDD/SSD), expansion cards, and connect front panel I/O.
	AeroCool D502A Mid Tower Case Installation and Connection Guide Detailed installation and connection guide for the AeroCool D502A Mid Tower Case, covering component installation, front panel I/O, and RGB fan hub setup for various motherboard sync technologies.