Behringer P2 Quick Start Guide

Safety Instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Use only attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
Do not install in a confined space, such as a book case or similar unit.
Do not place naked flame sources, such as lighted candles, on the apparatus.

Controls

(1) INPUT jack: Accepts XLR or 1/4" male plugs for connection of a personal monitor mix. Press the release tab to disconnect the cable.
(2) VOLUME knob: Adjusts the output level and powers the unit off when turned fully counterclockwise. The adjacent LED will light when the power is on.
(3) HEADPHONE output: Allows connection of a 1/8" stereo mini jack.
(4) BELT CLIP: Attaches to a belt or pant waistline for hands-free use.
(5) RELEASE button: Allows access to the batteries and stereo/mono switch. Hold the button down and slide the outer shell down toward the input jack to expose the unit’s interior.
(6) MONO/STEREO switch: Should be set to Mono when used with a mixer’s aux send or any other mono source, and set to stereo when connected to a headphone output or other stereo source.
(7) BATTERY SLOTS: Allow the unit to be powered by a pair of AAA batteries. Observe the correct polarity when inserting new batteries.

Specifications

Specification	Details
Input Type	XLR-1/4" locking combo jack
Output Type	1/8" TRS, stereo
Impedance	0.5 Ω
Max. output	2 x 100 mW @ 16 Ω
Power	2 x AAA batteries (not included)
Battery life	~12 hours
Dimensions (H x W x D)	33 x 38 x 132 mm (1.3 x 1.5 x 5.2")
Weight	140 g (0.3 lbs)

Legal Disclaimer

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2024 All rights reserved.

Limited Warranty

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/pages/support#warranty.

	Behringer PM1 Quick Start Guide: Personal Monitor Amplifier Get started quickly with the Behringer PM1 Personal Monitor Amplifier. This guide covers essential safety instructions, control descriptions, connection details, technical specifications, and warranty information for your Behringer PM1.
	Behringer POWERPLAY P1 Personal In-Ear Monitor Amplifier Quick Start Guide Quick start guide for the Behringer POWERPLAY P1 Personal In-Ear Monitor Amplifier, covering safety instructions, controls, specifications, and warranty information.
	Behringer MONITOR1 Quick Start Guide: Premium Passive Stereo Monitor and Volume Controller Get started quickly with the Behringer MONITOR1, a premium passive stereo monitor and volume controller. This guide covers hook-up, controls, specifications, and important safety information.
	Behringer SD16/SD8 Quick Start Guide: I/O Stage Box with MIDAS Preamps Comprehensive guide to the Behringer SD16/SD8 I/O Stage Box, covering setup, controls, safety, networking (AES50, ULTRANET), channel management, specifications, and FCC compliance. Features MIDAS preamps for professional audio applications.
	Behringer SD16/SD8 Quick Start Guide: I/O Stage Box and Monitoring Hub Concise guide to setting up and using the Behringer SD16/SD8 I/O Stage Box, featuring MIDAS preamps, AES50 networking, and ULTRANET personal monitoring.
	Behringer MONITOR2USB Quick Start Guide Get started quickly with the Behringer MONITOR2USB High-End Speaker and Headphone Monitoring Controller. This guide covers setup, controls, and important safety information for your studio monitoring needs.
	Behringer EUROLIVE B205D Ultra-Compact 150-Watt PA/Monitor Speaker System Quick Start Guide Get started quickly with the Behringer EUROLIVE B205D PA/Monitor Speaker System. This guide covers safety, setup, controls, specifications, and FCC compliance for your ultra-compact 150-watt audio solution.
	Behringer EUROLIVE B205D: Ultra-Compact 150W PA/Monitor Speaker Quick Start Guide Get started quickly with the Behringer EUROLIVE B205D ultra-compact 150W PA/Monitor Speaker System. This guide covers essential safety information, hook-up procedures, control descriptions, and technical specifications.