Resistex IRO LED Panel Installation Guide

Product Overview

This document provides installation instructions for the Resistex IRO LED panel light. It covers wiring, mounting options (suspension, surface, recessed), and operational guidance for push-button controls, including activation and synchronization.

Safety Instructions

General Safety Notes:

• Never work on the luminaire when it is live (under voltage).
• Installation must be performed by a professional installer in compliance with all relevant electrical installation standards and regulations.
• Be aware of the risk of electrostatic discharges (ESD). Handle components with necessary precautions.
• Please observe all notes and follow the steps described in the mounting instructions carefully.

Wiring and Connections

The IRO LED panel supports various wiring configurations, including DALI and Push Button (BP) control.

Push Button (BP) Control

To activate the Push Button on the IRO, perform 5 short presses. For synchronizing luminaires using the Push Button, perform 1 long press of 15 seconds.

Wiring Diagram Description (Push Button):

A diagram illustrates a Push Button connected to the IRO unit. The wiring includes:

• GREEN wire: COOL +
• WHITE wire: COOL -
• RED wire: WARM +
• BLACK wire: WARM -

The unit receives AC power (L/N). An LED indicator is present on the unit.

DALI and Push Button (BP) Wiring Diagram

A detailed diagram shows connections for both DALI (Digital Addressable Lighting Interface) and BP (Push Button) control systems. It specifies connections for ON/OFF and IRO ADJUSTMENT functions.

Key Connections:

• DALI: DALI +, DALI -
• BP: AC/L, AC/N, BP, N, BP

The diagram also highlights the ON/OFF IRO ADJUSTMENT interface.

Mounting and Installation Methods

The IRO LED panel can be installed using three primary methods:

1. Suspension Mounting

Instructions show the fixture being mounted using suspension cables or rods, typically attached to a ceiling structure.

2. Surface Mounting (SAILLIE)

Instructions illustrate mounting the fixture directly onto a flat surface, likely using provided brackets.

3. Recessed Mounting (ENCASTRE)

Instructions detail installing the fixture into a suspended ceiling grid. This involves placing the panel into a pre-cut opening in the ceiling tiles and securing it.

General Mounting Steps Illustrated:

1. Mounting brackets are shown being attached to the fixture or ceiling structure.
2. The fixture is depicted being inserted into a suspended ceiling grid opening.
3. The final state shows the fixture installed flush with the ceiling surface.

Maintenance Instructions

• Do not use chemical or abrasive products for cleaning the fixture.
• Keep these instructions for future dismantling or maintenance work.
• Additional information about Resistex luminaires is available on the website: www.resistex-sa.com.
• Resistex is not responsible for any misuse of the product.

Company Information

Resistex Exploitation

11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche, France

Tel: 04 93 276 276 | Fax: 04 93 276 280

Email: contact@resistex-sa.com

Website: www.resistex-sa.com

Company Registration: APE 2740Z | Siret 487 593 477 00010 | SAS CAPITAL 649979 € | TVA F.R. 73 487 593 477

Certifications and Ratings

The product complies with or has the following ratings:

• ROHS compliant
• Classe II (Class II electrical insulation)
• CE Marking
• IP Rating: Indicated as '20', likely IP20
• IK Rating: Indicated as '04', likely IK04
• Other ratings: '80', '5' (specific meaning not detailed in document)
• NON RECOUVRABLE (meaning 'non-recoverable' or potentially 'non-dimmable' in context)