REMOTE CONTROLLED FART MACHINE

User Manual

Model: GH1088

Installation

Remove the screw located on the battery cover by using a small Phillips screwdriver.
Insert 4 x AA (not included) batteries by using the correct polarity in the unit.
Place the battery cover back on and tighten the screw securely in place.

Note: The remote control comes installed with a 12V A23 battery.

Operation

Press the power switch to On, located on the right side of the unit.
Press the remote button to release the fart sound; each sound will last several seconds.
Press the power switch to Off when not in use.

Note: The different noises will automatically cycle through.

Safety

Do not pull apart the casing of the fart machine or remote control while turned on to avoid damage and injury.
Keep the fart machine away from high temperatures as it may cause damage to the unit and batteries.
Do not expose the fart machine to water, moisture, or liquids.

Specifications

Wireless Frequency: 433MHz

Remote Control Range: Up to 15m

Play Time: Up to 5 Hours

Batteries:

Fart Machine: 4 x AA (Not Included)
Remote Control: 1 x 12V A23 (Included)

Dimensions: 120(H) x 95(W) x 40(D)mm

Distributed by

Electus Distribution Pty Ltd

46 Eastern Creek Dr,

Eastern Creek NSW 2766

Australia

Ph: 1300 738 555

Int'l: +61 2 8832 3200

Fax: 1300 738 500

	RGB LED Light Strip Kit User Manual User manual for the RGB LED Light Strip Kit, including safety instructions, specifications, remote controller key descriptions, and troubleshooting.
	Snap-on Electronic Project Kit KJ-8972: Experiments and Guide Learn electronics with the Snap-on Car and Boat Electronic Project Kit (KJ-8972). This guide details over 50 experiments covering circuits, motors, LEDs, and sensors, suitable for ages 5 and up. Includes easy-to-follow instructions and safety information.
	Remote Control Central Locking 4 Door Kit Installation and Features Comprehensive guide to the Remote Control Central Locking 4 Door Kit, detailing its contents, technical specifications, key features, installation steps, and troubleshooting tips. Includes information on remote lock/unlock, boot release, and transmitter programming.
	MS-6115 Multifunction Power Meter User Manual \| Electus Distribution Comprehensive user manual for the MS-6115 Multifunction Power Meter by Electus Distribution. Learn how to install, operate, and set up your power meter for accurate energy monitoring.
	Mini Electronic Safe GT4306 User Manual and Warranty Information User manual and warranty details for the Electus Distribution Mini Electronic Safe, model GT4306. Includes instructions for battery installation, opening, changing password, and using coin/note slots.
	TH2130 Hydraulic Crimping Tool User Manual - Electus Distribution Comprehensive user manual for the Electus Distribution TH2130 Hydraulic Crimping Tool, covering technical specifications, operation, maintenance, and warranty details.
	Gaming Desk with RGB LEDs - Assembly Instructions Comprehensive assembly instructions for the Gaming Desk with RGB LEDs, detailing parts, tools, and step-by-step guidance for setup and LED integration. Includes distributor information.
	TH2132 Hydraulic Crimping Tool User Manual and Warranty Information Comprehensive user manual and warranty information for the TH2132 Hydraulic Crimping Tool, detailing specifications, operation, maintenance, and Electus Distribution's warranty policy.