Altronix Trove Access & Power Integration

Product Models

Trove1SA1: Trove1 enclosure with Altronix/SALTO backplane (TSA1).

TSA1: Altronix/SALTO backplane only.

Trove2SA2: Trove2 enclosure with Altronix/SALTO backplane (TSA2).

TSA2: Altronix/SALTO backplane only.

All registered trademarks are property of their respective owners.

Rev. TSA122418

Installing Company: ____________________ Service Rep. Name: ____________________

Address: ____________________________________________________ Phone #: ____________________

Overview

Altronix Trove1SA1 and Trove2SA2 enclosures accommodate combinations of SALTO boards with or without Altronix power supplies and sub-assemblies for access systems.

Agency Listings:

• UL 294 - 6th edition: Line Security I, Destructive Attack I, Endurance IV, Stand-by Power II*.
• *Stand-by Power Level I if no battery is supplied.
• This Class B digital apparatus complies with Canadian ICES-003.
• Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.
• CE European Conformity.

Specifications:

• 16 Gauge backplanes and enclosures with ample knockouts for convenient access.

Trove1SA1

Trove1 enclosure with TSA1 Altronix/SALTO backplane

• Includes: tamper switch, cam lock, lock nuts, and mounting hardware.
• Enclosure Dimensions (H x W x D): 18” x 14.5" x 4.625" (457mm x 368mm x 118mm).

TSA1

Altronix/SALTO backplane only

• Includes mounting hardware.
• Dimensions (H x W x D): 16.625" x 12.5" x 0.3125" (422.3mm x 317.5mm x 7.9mm).

TSA1 accommodates a combination of the following:

• Altronix Modules:
  • One (1) AL400ULXB2, AL600ULXB, AL1012ULXB, AL1024ULXB2, eFlow4NB, eFlow6NB, eFlow102NB or eFlow104NB.
  • Up to two (2) PD4UL/PD4ULCB, PD8UL/PD8ULCB, MOM5, PDS8/PDS8CB or VR6.
• SALTO Modules:
  • Up to four (4) CU42E0, CU4200 or CU4EB8 modules.

Trove2SA2

Trove2 enclosure with TSA2 Altronix/SALTO backplane

• Includes: tamper switch, cam lock, lock nuts, and mounting hardware.
• Enclosure Dimensions (H x W x D): 27.25" x 21.75" x 6.5" (692.15mm x 552.5mm x 165.1mm).

TSA2

Altronix/SALTO backplane only

• Includes mounting hardware.
• Dimensions (H x W x D): 25.375" x 19.375" x 0.3125" (644.5mm x 482.6mm x 7.9mm).

TSA2 accommodates a combination of the following:

• Altronix Modules:
  • Up to two (2) AL400ULXB2, AL600ULXB, AL1012ULXB, AL1024ULXB2, eFlow4NB, eFlow6NB, eFlow102NB or eFlow104NB.
  • Up to three (3) ACM8/ACM8CB or ACMS8/ACMS8CB.
  • Up to four (4) PD4UL/PD4ULCB, PD8UL/PD8ULCB, MOM5, PDS8/PDS8CB or VR6.
• SALTO Modules:
  • Up to nine (9) CU42E0, CU4200 or CU4EB8 modules.

Hardware:

Hardware components include Metal or Nylon Spacers, 5/16" Pan Head Screws, and Lock Nuts.

Installation Instructions for Trove1 and Trove2:

1. Remove backplane from enclosure prior to mounting (do not discard hardware).
2. Trove1SA1 (Pg. 10): Mark and predrill holes on the wall to line up with the top two keyholes in the enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding. Place the enclosure's upper keyholes over the two upper screws; level and secure. Mark the position of the lower two holes. Remove the enclosure. Drill the lower holes and install the two fasteners. Place the enclosure's upper keyholes over the two upper screws. Install the two lower screws and make sure to tighten all screws.
   Trove2SA2 (Pg. 12): Mark and predrill holes on the wall to line up with the top three keyholes in the enclosure. Install three upper fasteners and screws in the wall with the screw heads protruding. Place the enclosure's upper keyholes over the three upper screws; level and secure. Mark the position of the lower three holes. Remove the enclosure. Drill the lower holes and install the three fasteners. Place the enclosure's upper keyholes over the three upper screws. Install the three lower screws and make sure to tighten all screws.
   Figure 1 illustrates the enclosure, edge of enclosure, tamper switch (provided), and connection to Access Control Panel or UL Listed Reporting Device.
3. Mount included UL Listed tamper switch (Altronix Model TS112 or equivalent) in desired location, opposite hinge. Slide the tamper switch bracket onto the edge of the enclosure approximately 2" from the right side. Connect tamper switch wiring to the Access Control Panel input or the appropriate UL Listed reporting device. To activate alarm signal open the door of the enclosure.
4. Mount Altronix/SALTO modules to backplane, refer to pages 3-5.

TSA1: Configuration of Altronix Power Supply/Sub-Assembly Boards and SALTO Modules

1. Fasten spacers (provided) to pems that match the hole pattern for Altronix power supply/chargers and sub-assemblies. Fasten metal spacers in the correct locations to provide proper grounding. Fasten spacers (provided) to pems that match the hole pattern for SALTO CU42E0, CU4200 or CU4EB8 modules.
2. Mount boards to spacers utilizing 5/16" pan head screws (provided).
3. Fasten TSA1 backplane to Trove1 enclosure utilizing lock nuts (provided).

Power Supply, Sub-Assembly and Access Controller Position Chart for the Following Models (TSA1/Trove1SA1 Configurations):

Figure 2 illustrates various metal spacer placements and mounting patterns (A, B, C) on the TSA1 backplane. Figure 2a shows the assembly of a pan head screw, spacer, and module onto the backplane.

TSA2: Configuration of Altronix Power Supply/Sub-Assembly Boards and SALTO Modules

1. Fasten spacers (provided) to pems that match the hole pattern for Altronix power supply/chargers and sub-assemblies. Fasten metal spacers in the correct locations to provide proper grounding. Fasten spacers (provided) to pems that match the hole pattern for SALTO CU42E0, CU4200 or CU4EB8 modules.
2. Mount boards to spacers utilizing 5/16" pan head screws (provided).
3. Fasten TSA2 backplane to Trove2 enclosure utilizing lock nuts (provided).

Power Supply, Sub-Assembly and Access Controller Position Chart for the Following Models (TSA2/Trove2SA2 Configurations):

Figure 3 illustrates various metal spacer placements and mounting patterns (A, B, C) on the TSA2 backplane. Figure 3a shows the assembly of a pan head screw, spacer, and module onto the backplane.

TSA2: Configuration of SALTO Modules

1. Fasten spacers (provided) to pems that match the hole pattern for SALTO CU42E0, CU4200 or CU4EB8 modules.
2. Mount boards to spacers utilizing 5/16" pan head screws (provided).
3. Fasten TSA2 backplane to Trove2 enclosure utilizing lock nuts (provided).

Access Controller Position Chart for the Following Models:

Figure 4 illustrates various mounting patterns (C) for SALTO modules on the TSA2 backplane. Figure 4a shows the assembly of a pan head screw, spacer, and module onto the backplane.

Altronix eFlow Power Supply/Chargers: Network Control and Monitoring with LINQ2

Altronix eFlow Power Supply/Chargers can be controlled and monitored, reporting power/diagnostics from anywhere over the network using the LINQ2 Network Communication Module.

LINQ2 - Network Communication Module Features:

The LINQ2 module provides remote IP access to real-time data from eFlow power supply/chargers, helping maintain optimal system performance, minimize downtime, and reduce service calls. This contributes to a lower Total Cost of Ownership (TCO) and can create new Recurring Monthly Revenue (RMR) opportunities.

• UL Listed in the U.S. and Canada.
• Local or remote control of up to two Altronix eFlow power output(s) via LAN and/or WAN.
• Monitors real-time diagnostics: DC output voltage, output current, AC & battery status/service, input trigger state change, output state change, and unit temperature.
• Access control and user management: Restrict read/write access, restrict users to specific resources.
• Two (2) integral network controlled Form "C" Relays.
• Three (3) programmable input triggers: Control relays and power supplies via external hardware sources.
• Email and Windows Dashboard notifications.
• Event log tracks history.
• Secure Socket Layer (SSL).
• Programmable via USB or web browser - includes operating software and 6 ft. USB cable.

Figure illustrating LINQ2 Module mounting inside a Trove Enclosure, showing network connection points for installation, programming, and monitoring, alongside an Altronix eFlow Power Supply.

Notes:

This section is reserved for any additional notes or information.

Dimensions:

Detailed dimension drawings are provided for TSA1, Trove1SA1, TSA2, and Trove2SA2 components to assist with installation planning and integration. These figures include precise measurements in both inches and millimeters for height, width, depth, and various mounting points and knockouts.

• TSA1 Dimensions: 16.625" x 12.5" x 0.3125" (422.3mm x 317.5mm x 7.9mm).
• Trove1SA1 Enclosure Dimensions: 18" x 14.5" x 4.625" (457mm x 368mm x 118mm).
• TSA2 Dimensions: 25.375" x 19.375" x 0.3125" (644.5mm x 482.6mm x 7.9mm).
• Trove2SA2 Enclosure Dimensions: 27.25" x 21.75" x 6.5" (692.15mm x 552.5mm x 165.1mm).

Refer to the original document for detailed diagrams showing all dimensions and hole placements.