HOMCOM 835-651 Sideboard Buffet Cabinet Assembly Instructions
Model: 835-651 / 835-651V80
Important Information
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
(Instructions also available in French, Spanish, Portuguese, German, and Italian)
[Tools Recommended]
Illustration of the assembled HOMCOM sideboard buffet cabinet.
Using Cam Lock and Quickfit
Quickfit Installation: Tighten quickfit until the shoulder is flush with the panel. Do not overtighten or undertighten.
Cam Lock Installation: When fitting the cam lock, ensure the starting position is correct before inserting the connecting quickfit. The quickfit head should be in the center of the cam lock when the two panels are joined. The cam lock should be inserted before the quickfit.
Tightening Cam Lock: Turn the cam lock clockwise to tighten. ↪️
Diagrams illustrate the correct insertion and tightening of Quickfit and Cam Lock mechanisms.
Hinge Adjustment Guide
It may be necessary to adjust the hinges so that the doors align. Use the instructions below as a guide.
- Vertical Adjustment: To adjust the door vertically, loosen the screw as shown and move the door up or down as needed. ⬆️⬇️
- Gap Adjustment: To adjust the gap from the door to the main frame, turn the screw clockwise or anti-clockwise as needed. ↪️↩️
- Lateral Adjustment: To adjust the door laterally, adjust the screw as shown by turning clockwise or anti-clockwise. ↪️↩️
Please fix other screws. ✔️
Diagrams illustrate the three types of hinge adjustments.
Parts List
The following parts are included in the package:
| Part # | Description | Quantity |
|---|---|---|
| 1 | Top Panel | 1 |
| 2 | Left Side Panel | 1 |
| 3 | Right Side Panel | 1 |
| 4 | Back Panel | 1 |
| 5 | Base Panel | 1 |
| 6 | Door | 3 |
| 7 | Shelf | 2 |
| 8 | Back Panel (Upper) | 1 |
| 9 | Support Bar | 1 |
| 10 | Support Bar | 1 |
| 11 | Drawer Slide Component | 2 |
| 12 | Drawer Slide Component | 4 |
| 13 | Drawer Slide Component | 2 |
| 14 | Drawer Slide Component | 1 |
| 15 | Drawer Side Panel | 2 |
| 16 | Drawer Base Panel | 1 |
| 17 | Drawer Back Panel | 1 |
| 18 | Back Panel (Lower) | 1 |
| 19 | Drawer Front Panel | 1 |
| 20 | Drawer Side Panel | 2 |
| 21 | Drawer Slide Component | 2 |
| 22 | Drawer Base Panel | 1 |
| 23 | Drawer Front Panel | 1 |
| 24 | Drawer Front Panel | 1 |
| 25 | Drawer Base Panel | 1 |
| 26 | Drawer Front Panel | 1 |
| 27 | Drawer Front Panel | 1 |
| 28 | Adjustable Shelf/Panel | 1 |
| 29 | Adjustable Shelf/Panel | 1 |
Hardware List
The following hardware is included:
| Code | Description | Quantity |
|---|---|---|
| A | Screw (M3*12) | 51 |
| B | Screw (M3*14) | 51 |
| C | Screw (M4*12) | 16 |
| D | Screw (M4*35) | 6 |
| E | Screw (M4*18) | 3 |
| F | Screw (M4*14) | 24 |
| G | Screw (M3*14) | 4 |
| H | Screw (M4*12) | 24 |
| I | Screw (M4*18) | 3 |
| J | Screw (M4*30) | 23 |
| K | Screw (M4*12) | 2 |
| L | Connector | 5 |
| M | Connector | 6 |
| N | Connector | 8 |
| O | Connector | 2 |
| P | Screw | 2 |
| Q | Screw | 2 |
| R | Screw | 2 |
| CL | Drawer Slide Component | 2 |
| CR | Drawer Slide Component | 2 |
| DL | Drawer Slide Component | 1 |
| DR | Drawer Slide Component | 1 |
NOTE: Do not confuse similar screws.
Illustrations of hardware components A-R and connectors CL, CR, DL, DR are provided.
Assembly Steps
Follow these steps carefully to assemble the cabinet.
Step 01: Base Assembly
Attach side panels (2, 4) to the base panel (5) using hardware A (x6), B (x6), and C (x4). Ensure correct orientation.
Diagram shows parts 2 and 4 being attached to part 5 with hardware A, B, C.
Step 02: Side Panel Attachment
Attach side panels (2, 4) to the base panel (5) using hardware A (x6), B (x6), and C (x4). Ensure correct orientation.
Diagram shows parts 2 and 4 being attached to part 5 with hardware A, B, C.
Step 03: Drawer Slide Installation (Panels 2 & 4)
Please find the exact hole for installation, otherwise it will be misaligned. The screws on the drawer slide must be leveled, otherwise it will affect the smoothness of the drawer. Install drawer slides (CL, CR) onto panels (2, 4) using screws (D) (x4) and connectors (CL, CR) (x1 each). Ensure screws are level.
Diagrams show drawer slide components (CL, CR) being attached to panels 2 and 4 with screws D.
Step 04: Drawer Slide Installation (Panel 3)
Please find the exact hole for installation, otherwise it will be misaligned. The screws on the drawer slide must be leveled, otherwise it will affect the smoothness of the drawer. Install drawer slides (CL, CR) onto panel (3) using screws (D) (x4) and connectors (CL, CR) (x1 each). Ensure screws are level.
Diagrams show drawer slide components (CL, CR) being attached to panel 3 with screws D.
Step 05: Connecting Panels
Connect panels (2, 3) using support bar (9) and hardware A (x4), B (x4).
Diagram shows panels 2 and 3 being joined by support bar 9 with hardware A, B.
Step 06: Connecting Panels
Connect panels (2, 3) using support bar (10) and hardware A (x2), B (x2).
Diagram shows panels 2 and 3 being joined by support bar 10 with hardware A, B.
Step 07: Attaching Top Panel
Attach the top panel (1) to the assembled structure using hardware A (x2), B (x2).
Diagram shows top panel 1 being attached to the structure with hardware A, B.
Step 08: Attaching Base Structure
Assemble the base structure using panels (17, 16) and hardware A (x8), B (x8).
Diagram shows base structure assembly with panels 17, 16 and hardware A, B.
Step 09: Main Frame Assembly
Assemble the main frame using panels (5) and hardware A (x14), B (x14).
Diagram shows main frame assembly with panel 5 and hardware A, B.
Step 10: Attaching Internal Components
Attach internal components using hardware C (x6), E (x6), O (x2), G (x4).
Diagram shows internal components being attached with hardware C, E, O, G.
Step 11: Attaching Shelves
Insert shelves (7, 8) into the cabinet body.
Diagram shows shelves 7 and 8 being inserted into the cabinet.
Step 12: Attaching Top Panel
Attach the top panel (1) to the cabinet using hardware A (x6), B (x6), C (x6).
Diagram shows top panel 1 being attached to the cabinet with hardware A, B, C.
Step 13: Drawer Assembly (Part 1)
Assemble drawer components (21, 22, 23) using hardware J (x4), K (x1), L (x1).
Diagram shows drawer parts 21, 22, 23 being assembled with hardware J, K, L.
Step 14: Drawer Assembly (Part 2)
Attach drawer front panel (24) to the assembled drawer using hardware A (x5), D (x4), DL (x1), DR (x1), J (x1).
Diagram shows drawer front panel 24 being attached to the drawer assembly with hardware A, D, DL, DR, J.
Step 15: Drawer Assembly (Part 3)
Assemble drawer components (26, 27) using hardware J (x4), K (x1), L (x1).
Diagram shows drawer parts 26, 27 being assembled with hardware J, K, L.
Step 16: Drawer Assembly (Part 4)
Attach drawer front panel (25) to the assembled drawer using hardware A (x4), D (x4), DL (x1), DR (x1).
Diagram shows drawer front panel 25 being attached to the drawer assembly with hardware A, D, DL, DR.
Step 17: Attaching Doors
Attach doors (6) using hardware M (x2), N (x4), L (x1), I (x1), H (x8).
Diagram shows doors 6 being attached with hardware M, N, L, I, H.
Step 18: Attaching Doors
Attach doors (6) using hardware M (x2), N (x4), L (x1), I (x1), H (x8).
Diagram shows doors 6 being attached with hardware M, N, L, I, H.
Step 19: Attaching Doors
Attach doors (6) using hardware L (x1), M (x2), I (x1), H (x8).
Diagram shows doors 6 being attached with hardware L, M, I, H.
Step 20: Inserting Drawers
Be careful to push in the board when both sides of the slide way have been aligned. Insert the assembled drawers into the cabinet. ➡️
Diagram shows drawers being inserted into the cabinet.
Step 21: Adjustable Panel/Shelf
The buckles have N optional adjustment. Insert adjustable panel/shelf (28).
Diagram shows adjustable panel/shelf 28 being inserted.
Step 22: Adjustable Panel/Shelf
The buckles have N optional adjustment. Insert adjustable panel/shelf (29).
Diagram shows adjustable panel/shelf 29 being inserted.
Step 23: Anti-Dumping Belt Installation (Wall Mount)
This is an anti-dumping belt that fixes the product to the wall. It can be used or not, follow your needs. Use appropriate screws (P, Q, R) for wall mounting.
Diagram shows the anti-dumping belt being attached to the cabinet and wall.
Step 24: Wall Mounting Screws
If it is a solid wall, please use expansion and self-tapping screws. If it is a wooden wall, only use self-tapping screws. Please do not overtighten the screws. Use screws (J, Q, F) for wooden walls and (J, Q, F, DL, DR) for solid walls.
Diagrams illustrate screw usage for solid and wooden walls.
Contact Information and Recycling
If you have any questions, please contact the customer care center.
- US: 001-877-644-9366, customerservice@aosom.com. Imported by Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA. MADE IN CHINA.
- CA: 416-792-6088, customerservice@aosom.ca. Imported by Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9. MADE IN CHINA.
- ES: 0034-931294512, atencioncliente@aosom.es. IMPORTADOR: SPANISH AOSOM, S.L., C/ ROC GROS, N° 15. 08550, ELS HOSTALETS DE BALENYÀ, SPAIN.
- PT: 0034-931294512, info@aosom.pt. IMPORTADOR: SPANISH AOSOM, S.L, C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ.
- DE: 0049-0(40)-88307530, service@aosom.de. ADRESSE DES IMPORTEURE: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany.
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk. IMPORTER ADDRESS: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH. MADE IN CHINA.
- IT: 0039-0249471447, clienti@aosom.it. IMPORTATO DA: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI).
- FR: 0033-1-84166106, aosom@mhfrance.fr. Importé par: MH France 2, rue Maurice Hartmann 92130 Issy-les-Moulineaux. Fabriqué en Chine.
Recycling information: ♻️ (Dispose of packaging responsibly).
