Assembly Steps
Step 01
Attach drawer slide components (M) to the inner sides of the lower side panels (13 and 14). Insert cam bolts (A) into the designated holes on panels 13 and 14. Align the drawer slide components (M) with the cam bolts. Secure by inserting cam locks (Q) into the corresponding holes on component M and turning them clockwise [⚙️].
Hardware used: A (x2), Q (x4), M (x1 per side panel, total 2)
Step 02
Connect the lower side panels (13 and 14) to the middle shelf (12). Insert cam bolts (B) into the ends of the middle shelf (12). Align the lower side panels (13 and 14) with the cam bolts. Secure by inserting cam locks (C) into the corresponding holes on panels 13 and 14 and turning them clockwise [⚙️].
Hardware used: B (x2), C (x2)
Step 03
Insert cam bolts (A) into the designated holes on the base panel (15).
Hardware used: A (x4)
Step 04
Attach the base panel (15) to the assembled lower side panels (13 and 14). Align the cam bolts (A) on panel 15 with the holes in panels 13 and 14. Secure using cam locks (C) inserted into panels 13 and 14 and turned clockwise [⚙️]. Additionally, use screws (D) to further secure the base panel (15) to the lower side panels (13 and 14).
Hardware used: C (x4), D (x4)
Step 05
Insert cam bolts (A) into the designated holes on the drawer base supports (17).
Hardware used: A (x4)
Step 06
Attach the drawer base supports (17) to the main frame. Insert cam bolts (B) into the designated holes on the main frame. Align the drawer base supports (17) with the cam bolts. Secure by inserting cam locks (C) into the corresponding holes on supports (17) and turning them clockwise [⚙️].
Hardware used: B (x4), C (x4)
Step 07
Secure the drawer base supports (17) to the main frame. Insert cam locks (B) into the designated holes on the main frame and turn them clockwise [⚙️] to engage with the cam bolts previously installed in the supports (17).
Hardware used: B (x4)
Step 08
Insert cam bolts (A) into the designated holes on the upper side panels (2 and 3).
Hardware used: A (x6)
Step 09
Attach the upper side panels (2 and 3) to the main frame. Align the cam bolts (A) on panels 2 and 3 with the holes in the frame. Push the panels inwards [➡️] until flush. Secure by inserting cam locks (C) into the corresponding holes on the frame and turning them clockwise [⚙️].
Hardware used: A (x4), C (x4)
Step 10
Insert cam locks (B) into the designated holes on the upper side panels (4 and 5).
Hardware used: B (x6)
Step 11
Connect the curved shelf support (6) and middle shelf (8) to the left side assembly. Align shelf (8) and support (6) with the holes in the left upper side panel (2) and left lower side panel (4). Secure using cam locks (B) inserted into panels 2 and 4, and cam locks (C) inserted into shelf (8) and support (6), turning them clockwise [⚙️].
Hardware used: B (x2), C (x2)
Step 12
Connect the curved shelf support (6) and middle shelf (8) to the right side assembly. Align shelf (8) and support (6) with the holes in the right upper side panel (5) and right lower side panel (4). Secure using cam locks (B) inserted into panels 5 and 4, and cam locks (C) inserted into shelf (8) and support (6), turning them clockwise [⚙️].
Hardware used: B (x2), C (x2)
Step 13
Insert cam bolts (A) into the designated holes on the top panel (1). Attach bracket (L) to the underside of panel (1) using screws (F). Secure bracket (L) to panel (1) with screw (F).
Hardware used: A (x4), F (x2), L (x1)
Step 14
Attach the top panel (1) to the main frame. Align the cam bolts (A) on panel (1) with the holes in the upper side panels (2 and 3). Secure by inserting cam locks (B) into the corresponding holes on panels 2 and 3 and turning them clockwise [⚙️].
Hardware used: B (x4)
Step 15
Insert cam bolts (A) into the designated holes on the bottom shelf (9).
Hardware used: A (x6)
Step 16
Connect the bottom shelf (9) to the main frame. Align the cam bolts (A) on shelf (9) with the holes in the lower side panels (4 and 5). Secure using cam locks (C) inserted into panels 4 and 5 and turned clockwise [⚙️]. Additionally, use screws (D) to further secure the bottom shelf (9) to the lower side panels (4 and 5).
Hardware used: C (x4), D (x4)
Step 17
Prepare the drawer slides for attachment to the drawer boxes. Attach drawer slide components (M) to the drawer side panels (10). Insert cam bolts (Q) into the designated holes on panels (10). Align the drawer slide components (M) with the cam bolts. Secure by inserting cam locks (Q) into the corresponding holes on component M and turning them clockwise [⚙️]. Note the orientation indicated by "TURN BACK!".
Hardware used: Q (x4), M (x1 per drawer side panel, total 2)
Step 18
Assemble the drawer boxes. Attach drawer side panels (10) to the drawer base panel (24). Insert cam bolts (B) into the designated holes on panel (24). Align the drawer side panels (10) with the cam bolts. Secure by inserting cam locks (B) into the corresponding holes on panels (10) and turning them clockwise [⚙️].
Hardware used: B (x2)
Step 19
Continue assembling the drawer boxes. Attach drawer side panels (10) to the drawer front/back panel (12). Insert cam bolts (B) into the designated holes on panel (12). Align the drawer side panels (10) with the cam bolts. Secure by inserting cam locks (B) into the corresponding holes on panels (10) and turning them clockwise [⚙️]. Use screw (D) to secure the drawer base panel (24) to the drawer side panels (10).
Hardware used: B (x2), D (x1)
Step 20
Attach the back panels to the main cabinet structure. Use screws (K) to fasten the back panels (16, 19, 20, 21, 22, 23) to the rear edges of the cabinet frame and shelves. Ensure panels are aligned correctly.
Hardware used: K (x42)
Step 21
Prepare the cabinet doors. Attach hinges (F) and knobs (I) to the glass cabinet doors (30 and 31) using screws (F) and (H). Use brackets (E) and caps (O) as shown in the detailed view.
Hardware used: F (x10), H (x2), E (x4), I (x2), O (x2)
Step 22
Prepare the louvered doors. Attach hinges (F) and knobs (I) to the louvered doors (32 and 33) using screws (F) and (H). Use brackets (G) as shown in the detailed view.
Hardware used: F (x10), H (x2), G (x4), I (x2), O (x2)
Step 23
Attach the doors to the cabinet. Mount the glass cabinet doors (30, 31) and louvered doors (32, 33) to the main cabinet frame using screws (F) and (J). Bracket (L) is used for attachment. A detailed view shows attaching door (32) to panel (14) using screws (D, J) and bracket (F).
Hardware used: F (x18), J (x8), L (x1), D (x1)
Step 24
Insert cam bolts (A) into the designated holes on the drawer base panels (24 and 25).
Hardware used: A (x8)
Step 25
Assemble the drawer boxes. Connect drawer side panels (26) to drawer front/back panels (27) and drawer base panels (28). Use screws (D) to secure these components together.
Hardware used: D (x8)
Step 26
Insert the drawer bottom panels (29) into the grooves of the assembled drawer boxes. Ensure they are seated correctly.
Hardware used: None specific to this step, relies on previous assembly.
Step 27
Attach drawer slides (B) and drawer handles (I) to the assembled drawer boxes. Insert cam bolts (B) into the drawer boxes. Align drawer slides (B) and attach handles (I) using screws (H).
Hardware used: B (x8), H (x2), I (x2)
Step 28
Attach the remaining drawer slide components (F) and brackets (N) to the drawer boxes. Use screws (F) to secure these parts.
Hardware used: F (x8), N (x2)
Step 29
Insert the assembled drawers (24, 25) into their respective openings in the cabinet. Place the top shelf (7) and middle shelf (11) into their designated positions. Arrows indicate the direction of insertion [➡️].
Hardware used: None specific to this step.
Step 30
Final assembly and safety check. Attach the strap (P) to the top rear of the cabinet using screw (T). This strap is likely for securing the unit to a wall to prevent tipping. Use screws (F) and (R) as indicated for final adjustments or securing.
Hardware used: S (x1), T (x1), P (x1), F (x1), R (x2)
