Instruction Manual: Light Kit for Darth Maul's Sith Infiltrator 75383
Thank You
Thank you for purchasing this product. To achieve the perfect hidden-line effect, we use extremely thin aviation-grade wire with high tension and pressure tolerance. However, due to its thin nature, be careful not to cut through it as it might be susceptible to shearing during installation. Always be careful not to press brick pieces down on the wire.
Let's Get Started
If you face any challenges, please feel free to reach out via support@gameofbricks.eu. Please note that we offer 2 years of free light kit maintenance.
Step 1 (Bag 1)
Begin the installation by carefully placing the first set of LED lights into the designated positions within the LEGO model. Route the thin wires through the brick connections, ensuring they are not pinched or damaged. Pay close attention to the diagrams (not included here) for precise placement and wire routing to maintain the clean aesthetic.
Step 2 (Bag 2)
Continue the installation process by adding more LED lights as indicated for Bag 2. Connect these new wires, extending from the previous step or connecting to a new component. Meticulous wire management is essential to keep the interior tidy and prevent interference with the model's structure.
Step 3 (Bag 3)
This extensive step involves the majority of the LED placement and wire routing for the model. Carefully insert the remaining LED lights and connect their wires, following the specific path shown in the instructions. Ensure all wires are neatly tucked away and secured, adhering to the detailed visual guides for optimal results.
Step 4 - Classic Version
The following steps are specifically for the Classic Version of the model. Install the remaining lights and connect the wires as depicted in the visual guides for this particular configuration. Ensure all connections are secure and wires are routed appropriately for the Classic build.
Final Connection
Connect the completed light kit wiring harness to the provided battery box. Installation is now complete. If you wish to use an alternative power source, please ensure its maximum voltage does not exceed 6V to prevent damage to the light kit components.