Game of Bricks Instruction Manual

Welcome & Important Information

Thank you for purchasing this Game of Bricks light kit. The kit utilizes thin aviation-grade wire for a discreet installation. Please exercise caution during assembly to avoid damaging the wires, as they are delicate and susceptible to shearing. Ensure that LEGO bricks are not pressed directly onto the wires.

For assistance, please contact Game of Bricks support at support@gameofbricks.eu. A 2-year warranty on light kit maintenance is provided.

"Remember, concentrate on the moment. Feel. Don't think. Use your instincts." - Qui-Gon Jinn

Step 1: Podracer Lighting (Bag 1)

This step details the installation of lights and wiring for the two Podracers.

Prepare the Podracers. Attach small LED lights with wires to the engine areas of each Podracer.

Route the wires carefully along the Podracer structures. Insert small purple light elements and connect their associated wires.

Position the wired Podracers into the diorama. Guide the wires discreetly through the LEGO bricks and along the base.

Secure the wires on the diorama base by placing small black LEGO plates over them to conceal and protect them.

Step 2: Diorama Environment Lighting (Bag 2)

This step involves installing LED lighting for the diorama's environment.

Take the LED strip from Bag 2. Position it along the curved sections of the diorama's rock formations and archways.

Gently press the LED strip into place. Route the wires from the LED strip through the diorama, coordinating with existing wiring.

Connect the wires from the LED strip, ensuring they are managed alongside the Podracer wiring.

Step 3: Podracer and Diorama Integration (Bag 3)

This step continues the integration of lights into the Podracers and the diorama.

Assemble additional light components for the Podracers using LEDs, wires, and small connectors from Bag 3.

Connect these components to the Podracers, routing wires carefully. Manage multiple wires from different light sources.

Integrate the wired Podracer assemblies into the diorama, guiding all wires towards the base.

Continue to secure and hide wires on the diorama base using provided black LEGO plates.

Step 4: Final Wire Management (Bag 4)

This step completes the wiring process and ensures all connections are secure and hidden.

Prepare the final small LEDs and black connector pieces from Bag 4.

Connect these final light components and route their wires, integrating them with the existing wiring within the diorama.

Tuck and secure all remaining wires along the diorama base, using black LEGO plates to conceal them.

Ensure all wires are routed neatly towards the connection point for the power source.

Step 5: Connecting to Power

This final step connects the entire light kit to a power source.

Connect the main wire harness from the diorama to the provided battery box or USB power adapter.

The installation is now complete. If using an alternative power source, ensure the maximum voltage does not exceed 6V.

Enjoy Your Illuminated Diorama!

Your Game of Bricks light kit for the LEGO Star Wars Mos Espa Podrace Diorama 75380 is now installed. Enjoy the enhanced display!