User Manual MINIR4M-E (EN)

Introduction

This is a smart wall switch that supports 2.4GHz Wi-Fi, uses live-neutral wiring, and is compatible with the Matter ecosystem, allowing seamless integration with smart devices from other brands to build your home automation.

Key Features:

• ⚛️ Matter Compatibility
• ⚙️ Detach Relay Mode
• ⏰ Smart Schedule
• ✨ Smart Scene

Device Overview and Specifications

Device Components

The device features the following components:

• 1. Switch Button: Single press to turn the smart device on/off.
• 2. Device Button: Single press to turn the smart device on/off. Press and hold for 5 seconds to enter pairing mode (pairing time 10 minutes).
• 3. LED indicator (Blue): Indicates device status.
  • eWeLink Mode:
    • Flashes two short and one long: Device is in pairing mode.
    • Keeps on: Device is online.
    • Quick flash once: Device offline.
    • Quick flash twice: Connected to the router, but not connected to the cloud.
  • Matter Mode:
    • Flashes two short and one long: Device is in pairing mode.
    • Keeps on: Device is online.
    • Quick flash once: Device offline.

Diagram Description: An illustration shows the front and back of the smart wall switch, with numbered labels pointing to the Switch Button (1), Device Button (2), and LED Indicator (3).

Platform Certification

This device is compatible with major smart home platforms:

• Works with Google Home
• Works with Alexa

Specifications

Installation

1. Power Off

Before starting installation, ensure the power supply to the circuit is turned off.

⚠️ WARNING: Please install and maintain the device by a professional electrician. To avoid electric shock hazards, do not operate any connection or contact the terminal connector while the device is powered on!

2. Wiring Instruction

To ensure the safety of your electrical installation, it's essential that either a Miniature Circuit Breaker (MCB) or a Residual Current operated Circuit-breaker with Integral Overcurrent protection (RCBO) with an electrical rating of 10A has been installed before the MINIR4M-E.

✅ Make sure all wires are connected correctly.

Wiring Diagram and Symbols

Diagram Description: An illustration shows the back of the wall switch with terminals labeled N, L In, and L Out. It depicts the connection of incoming Live (L In) and Neutral (N) wires from the power source, and the outgoing wire to the Load.

3. Power On

When the device is used for the first time, it will enter pairing mode by default after being powered on. At this time, the LED indicator will flash in a pattern of "two short and one long".

The device will exit Pairing Mode if not paired within 10 minutes. To re-enter pairing mode, long-press the button for about 5 seconds until the LED indicator changes to the "two short and one long" flash pattern and then release.

Smart Home Integration

Matter Ecosystem User Guide

Open a Matter-compatible App to scan the Matter QR code on the Quick Guide or the device itself to add the device.

• ? Add to Apple via Matter
• ? Add to Google via Matter
• ?️ Add to Alexa via Matter
• ? Add to SmartThings via Matter

eWeLink Ecosystem User Guide

1. Download the eWeLink App

Please download the "eWeLink" App from Google Play Store or Apple App Store.

2. Scan QR code to add the device

Follow these steps within the eWeLink app:

1. Enter "Scan".
2. Scan the QR code on the quick guide or the device.
3. Select "Add Device".
4. If the device exits pairing mode, long-press the button for 5 seconds.

Diagram Description: A series of screenshots illustrate the process of adding a device in the eWeLink app, including scanning, searching, connecting to Wi-Fi, and device confirmation.

Step 5: Check LED indicator flashing status (Two short and one long).

Step 6: Search for the device and start connecting.

Step 7: Select the "Wi-Fi" network and enter the password.

Step 8: Device "Added completely".

Advanced Operations

Factory Reset

Reset the device to factory settings by selecting "Delete device" in the eWeLink App.

Compliance and Safety Information

EU Declaration of Conformity

Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type MINIR4M-E is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://sonoff.tech/compliance/

For CE Frequency

• EU Operating Frequency Range:
  • Wi-Fi: 802.11 b/g/n20 2412–2472 MHz, 802.11 n40: 2422–2462 MHz
  • BLE: 2402–2480 MHz
• EU Output Power:
  • Wi-Fi 2.4G < 20dBm
  • BLE < 20dBm

WEEE Disposal and Recycling Information

♻️ WEEE Disposal and Recycling Information: All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Warning

Under normal use conditions, this equipment should be kept at a separation distance of at least 20 cm between the antenna and the body of the user.

(French: Dans des conditions normales d'utilisation, cet équipement doit être maintenu à une distance d'au moins 20 cm entre l'antenne et le corps de l'utilisateur.)

Disposal Categories (Italian/French)

RACCOLTA DIFFERENZIATA

Verifica le disposizioni del tuo Comune.

Separa le componenti e conferiscile in modo corretto.

Diagram Description: Various recycling symbols are present, including the CE mark, PAP 22, a universal recycling symbol, and a crossed-out bin symbol.