USER GUIDE FOR SONOFF (RF) AND SLAMPHER
Published: December 8, 2015
Original Title: Sonoff SV Safe Voltage Akıllı Ev Modülü (Sonoff SV Safe Voltage Smart Home Module)
Introduction
Sonoff and Slampher are ITEAD's latest home automation devices. We are developing more versions to meet different needs. In addition to these, Sonoff TH, Sonoff SV, Smart Socket, and other products are available.
Installation Guide
How to install the Sonoff WiFi wireless switch?
Preparation: Switch off all related electricity sources first.
Attention: The power input L N cables must connect with the “INPUT” side. The power output L N cables must connect with "OUTPUT" side. Do not mistake the directions!
When connecting Sonoff to home appliances (within 2200W), the two terminal connector ports at "INPUT" can be connected to input cable L and N randomly, and "OUTPUT" can connect to output cable L and N randomly. To avoid safety problems, please strictly follow the wiring connection as follows:
Wiring Diagram Description:
- Input side: Terminals labeled 'N' (Neutral) and 'L' (Live).
- Output side: Terminals labeled 'N' (Neutral) and 'L' (Live).
How to install Slampher?
Screw an E27 bulb (general/LED) into Slampher firmly. Then screw Slampher into an E27 screw bulb holder. Then power it on to make it function.
Slampher Technical Specifications:
- Voltage range: 90-250V AC
- Switch type: APP remote and 433 remote
- Working condition temp: -28°C-55°C
- Max current: 2A
- Power Rating: <500w
- Humidity: ≤80%
Description of what can be controlled by Slampher: A visual shows various types of light bulbs (incandescent, LED, CFL) that can be fitted into the Slampher.
Pairing and Connectivity
Pairing with 433MHz RF remote controller (without WiFi)
If your Sonoff and Slampher have a 433MHz RF receiver, you can pair them with an RF Remote controller. The process is as follows:
Quickly press the "SET" button on Sonoff and Slampher twice. The red LED on Sonoff/Slampher will flash once. Then, press one of the ABCD buttons on the controller for a few seconds for pairing. If paired with 'A', pressing 'A' will turn the device on/off.
To cancel pairing, fast press the "SET" button on Sonoff/Slampher 3 times. A short press of the "SET" button acts as a switch to turn connected appliances on or off.
Diagram Description:
A Sonoff PRO device is shown with input (L/N) and output (L/N) terminals. A hand is shown pressing the 'SET' button on the device. A 433MHz RF remote controller with buttons A, B, C, D is also depicted.
The E-WeLink App
Overview
The E-WeLink app supports all ITEAD smart home products and cooperated products, including: Sonoff, Sonoff RF, Sonoff TH, Sonoff SV, Slampher, Smart Socket, smart fan (sold in China), dimming LED (sold in China), etc.
E-WeLink supports multiple languages: Simplified Chinese, Traditional Chinese, English, Russian, Polish, French, Danish, and Italian. More languages are planned for the future.
Supported App Functions:
- Remote turn on/off
- Tracking status
- Timing schedules
- Loop/countdown timer
- Device sharing
- Grouping management
- Smart scene
The application currently supports single-channel smart switches, double-channel smart switches, multi-channel smart switches, smart fans, dimming LEDs, and Sonoff TH temperature and humidity smart switches.
APP Operation:
- Download the APP: Scan the QR code below to download the eWeLink app to your smartphone or tablet.
QR Code Description: A square QR code with the eWeLink logo (an 'e' inside a circle) is displayed, indicating where to download the eWeLink application.
- Install the APP: Install the downloaded application on your smartphone.
- Register a new account: Enter your phone number/email address and a password (at least 8 characters). Enter the SMS verification code to register.
Update: Users from Asian countries MUST register with a mobile phone number. Users outside the Asian area MUST register with an email address.
- Login: Log in with your account credentials.
- Add devices: Follow the on-screen instructions to add your devices.
Android Version eWeLink:
- For Android, ensure WiFi is switched on your phone before adding a device.
- Long press the "SET" button (pairing button) on Sonoff/Slampher/Smart Socket/Sonoff RF until the green LED indicator blinks rapidly.
- Click the search icon in the middle. Check the blinking pattern and select the corresponding adding way, then click "next".
- Select your WiFi account and enter the password (leave blank if no password). Click "remember" for future logins, then click "next".
- The app will auto-search and connect to the "ITEAD-100000xxxxx" device around you.
- Name your device and access it for control.
iOS Version eWeLink:
- Click the search icon in the middle.
- Long press the "SET" button (pairing button) on Sonoff/Slampher/Smart Socket/Sonoff RF until the green LED indicator blinks rapidly. Check the blinking pattern and select the corresponding adding way, then click "next".
- If your device is 2nd generation (LED indicator flashes 3 times and repeats), open your phone's Settings > WiFi, connect to the WiFi starting with "ITEAD", and enter the default password "12345678".
- Go back to the App to confirm.
- Enter your WiFi router SSID and password (leave blank if no password).
- Finally, name your device and submit.
Note on Device Status: If a newly added device appears offline, wait a few seconds. If it remains offline, restart the device. If everything is correct, it will become online on the App.
Note on WiFi Switching: If you add a device using WiFi A, switching to WiFi B will make the device uncontrollable. To use WiFi B, you must delete the device and add it again using WiFi B.
LED Indicator Meanings (for all ITEAD smart home devices)
One device has one owner. A device cannot be added to another account unless deleted from the first. Only the owner can share devices.
Pairing State Indicators:
- 1st Generation: Green LED fast blinks.
Description: During the adding process for 1st generation devices, the green LED on the Sonoff device blinks rapidly.
- 2nd Generation: Green LED fast blinking or blinks 3 times and repeats.
Description: For 2nd generation devices, the green LED blinks rapidly or blinks three times and repeats to indicate pairing state.
Connection Status Indicators:
- 2. Green LED keeps on: Device has connected to the server successfully.
Description: A solid green LED indicates a successful connection to the server.
- 3. Green LED quickly blinks one time and repeats: Device failed to connect to the router. Confirm WiFi name and password are correct and try pairing again.
Description: Rapid single blinks of the green LED indicate a failure to connect to the WiFi router.
- 4. Green LED slowly blinks: Device has connected to the router and server, but failed to be added to the device list. Try adding again.
Description: Slow blinking of the green LED means the device is connected to the router and server but could not be added to the device list.
- 5. Green LED quickly blinks twice and repeats: Device has connected to the router but failed to connect to the server. Confirm your WiFi router is working normally.
Description: Rapid double blinks of the green LED indicate connection to the router but failure to connect to the server.
Device Management
6. Delete devices
To delete a device, navigate to the devices list, tap the delete icon, or access the specific device and tap the "Delete" button on the upper-right corner.
7. Manage Group, Scene, Smart Scene
From the "All Devices" page, you can expand to view your groups and tap "Manage Group" to create new ones. The upper-right corner of the "All Devices" page provides access to "scene" management.
Group Management:
Organize devices into different groups for easier management. For example, create a "Kitchen" group for devices installed in the kitchen. Accessing the "Kitchen" group page allows you to turn off all devices within it. Devices can be added to or removed from groups. Deleting a group does not delete the devices; they remain in the "My device" list.
Scene Management:
A scene can include multiple devices. Set each device's status to Close (off), Open (on), or Keep (current status), then save. All devices will automatically execute the preset status. Scenes can be used to define different states for devices, such as setting different LED statuses for scene A, which the system will then auto-execute.
Smart Scene:
Smart scenes enable the use of a trigger device to collect environmental data and control other devices. Supported trigger devices include Sonoff TH10/TH16 and Sonoff SC. Devices that can be triggered include all iTEAD 1-channel switches/sockets. For product support details, please inquire with customer service.
How does a smart scene work? (Example: Sonoff TH10)
Set Sonoff TH10 in manual mode; the task executes only when the specified condition is met. For example, a smart scene condition could be: Sonoff TH10 ≥ 27°C, execute Open Sonoff. If the real-time temperature is 26°C, the Sonoff device will auto-turn on when the temperature reaches 27°C or higher. If the initial temperature is already above 27°C, the condition will not trigger.
To use the smart scene of Sonoff TH, you need:
- At least one Sonoff TH/Sonoff SC/S22 and one 1-channel switch/socket (e.g., Sonoff, Sonoff RF, Sonoff SV, Smart Socket).
- All devices must be added to the same account, and you must be the owner. Shared devices are not supported.
- Sonoff TH must be in manual mode, not auto mode.
- Real-time temperature must cross the preset temperature to trigger the condition.
Smart Scene Setup Description: A visual interface for "Add new scene" is shown. It includes fields for "When it meets:" (e.g., Sonoff TH10, Temperature ≥27) and "Execute:" (e.g., OpenSonoff). Buttons for "SAVE" and "DELETE" are present.
8. Share devices
To share a device, tap the "Share" icon. Enter the phone number/email address of the recipient (they must be registered and logged in). They will receive an invitation and, upon acceptance, gain control authority. Only the owner can share devices.
About ITEAD and E-WeLink
ITEAD is continuously improving the App UI design and functionality. Many users are interested in CE certification; ITEAD has obtained certificates for several smart devices. The server infrastructure for ITEAD smart home series uses Amazon AWS Global Server, known for its stability and accessibility. A dedicated team backs up the smart home products to ensure continuous improvement.
A link to "Wiki" is mentioned for more information.
