Ergotron LX Pro Arm Single Display Desk Grommet Mount

User Installation Guide

Product Overview

The Ergotron LX Pro Arm Single Display Desk Grommet Mount is designed to provide flexible and ergonomic positioning for a single monitor. It features Ergotron's Constant Force™ Technology for smooth, effortless movement and height adjustment.

Key Features:

Single display mounting
Desk grommet mount
Constant Force™ Technology for easy adjustment
Full range of motion (tilt, pan, rotation, lift)
Weight capacity: 4-22 lbs (1.8-10 kg)

For installation videos and further support, visit: https://go.ergotron.com/45-682

Parts and Tools

Parts Included

The package includes the following components:

A: Base with desk clamp mechanism (1x)
B: Arm segment (1x)
C: Mounting bracket with VESA plate (1x)
D: Desk grommet mount hardware (base plate and threaded post, 1x each)
Screws: M4 x 10mm (5x for base, 4x for arm, 1x for rotation)
Allen Wrenches: 4mm, 2.5mm

Tools Needed

Phillips Head Screwdriver
4mm Allen Wrench
2.5mm Allen Wrench

Note: Product movements and spring adjustments may not function until the product is fully mounted and all equipment is attached.

Installation Instructions

⚠️ Warning: Because mounting surface materials can vary widely, it is imperative that you make sure the mounting surface is strong enough to handle the mounted product and equipment.

Step 1: Mount the Base/Clamp

Attach the base (A) or desk clamp to your desk. This can be done by clamping onto the edge of a desk or by using the grommet mount hardware (D) through a desk grommet hole. Ensure the mounting surface is suitable for the chosen method.

Step 2: Assemble Arm Segments

Connect the arm segments (B) to the base and the mounting bracket (C). Optional height adjustment can be made at this stage using a 4mm Allen wrench.

Step 3: Attach Monitor to VESA Plate

Attach the VESA plate (part of C) to the back of your monitor using the provided M4 x 10mm screws. Ensure the monitor is oriented correctly (Portrait/Landscape) and secure it. For 0° rotation, an additional screw may be required.

Step 4: Connect Arm to Monitor Mount

Attach the monitor assembly to the main arm structure.

Step 5: Connect Arm Segments and Monitor

Connect the arm segments and the monitor mount. The arm mechanism is under tension.

⚠️ WARNING! Stored Energy Hazard: The arm mechanism is under tension and will move up rapidly, on its own, as soon as attached equipment is removed. For this reason, DO NOT remove equipment unless the arm has been moved to the highest position! Failure to follow this instruction may result in serious personal injury and/or equipment damage!

Step 6: Adjustments

After installation is complete, the product requires adjustment to ensure smooth and stable movement. Make sure all equipment is properly installed before attempting adjustments. The product should move smoothly and stay where set. If movements are too easy or difficult, follow the adjustment instructions. Adjustments may require multiple turns. Repeat adjustments if equipment is added or removed, changing the load weight.

6.1 Lift Adjustment (Up and Down)

Adjust the lift strength to control the vertical movement of the arm. Use a 4mm Allen wrench.

Increase Lift Strength: If the mounted weight is too heavy or the arm does not stay up when raised, increase lift strength.
Decrease Lift Strength: If the mounted weight is too light or the arm does not stay down when lowered, decrease lift strength.

⚠️ Caution: Do not overtighten fasteners. Overtightening may cause damage to your equipment.

6.2 Tilt Adjustment (Forward and Backward)

Adjust the tilt tension for desired forward and backward movement of the monitor. Use a 4mm Allen wrench. ⚠️ Caution: Do not remove the screw for tilt adjustment.

6.3 Arm Swing Adjustment (Side-to-Side)

Adjust the arm swing tension for smooth side-to-side movement. Use a 2.5mm Allen wrench.

Increase Friction: If the product moves too easily, increase friction.
Decrease Friction: If the product is too difficult to move, decrease friction.

⚠️ Caution: Do not remove screws. Do not overtighten fasteners.

Step 7: Cable Management

Route cables through the arm segments. Use cable ties if needed. ⚠️ Caution: Leave enough slack in cables to allow full range of motion. Follow cable routing instructions to avoid pinching cables, equipment damage, or personal injury.

Safety and Specifications

Weight Capacity: 4 - 22 lbs (1.8 - 10 kg)

⚠️ CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!

Support and Contact

For the latest User Installation Guide, Warranty, or Service information, please visit:

Website: www.ergotron.com
Warranty: www.ergotron.com/warranty
Service: www.ergotron.com
Local Customer Care: http://contact.ergotron.com

When contacting customer service, reference the serial number.

	Ergotron LX Pro Arm Single Display Desk Mount - Installation and Adjustment Guide This guide provides comprehensive instructions for installing, adjusting, and safely using the Ergotron LX Pro Arm Single Display Desk Mount. It covers parts identification, assembly steps, various adjustments like lift, tilt, swing, and friction, as well as important safety warnings and weight capacity information.
	Ergotron HX Desk Monitor Arm: Installation and User Guide A comprehensive guide for installing and adjusting the Ergotron HX Desk Monitor Arm, featuring Constant Force™ Technology. Includes a parts list, step-by-step assembly instructions, adjustment procedures, safety warnings, and weight capacity information.
	Ergotron LX Pro Arm Single Display Desk Grommet Mount, Tall Pole - Installation Guide Detailed installation guide and user manual for the Ergotron LX Pro Arm, a single display desk grommet mount with a tall pole. Learn how to assemble, adjust, and safely use your monitor arm.
	Ergotron LX Pro Arm Display Arm Expansion Kit Installation Guide Detailed installation and adjustment guide for the Ergotron LX Pro Arm Display Arm Expansion Kit, covering parts, safety, weight capacity, and step-by-step assembly instructions.
	Ergotron LX Desk Monitor Arm Installation and User Guide Comprehensive guide for installing and using the Ergotron LX Desk Monitor Arm, including setup, adjustments, and safety information.
	Ergotron LX Desk Monitor Arm: Enhance Ergonomics and Productivity Discover the Ergotron LX Desk Monitor Arm, designed to improve viewing comfort and productivity. Features Constant Force™ technology, 33 cm height range, and multiple desk attachment options for monitors and TVs.
	Ergotron LX Multi-Monitor Arm Configurations \| Flexible Desk Mount Solutions Explore Ergotron's LX Multi-Monitor Arm configurations for improved workflow and productivity. Discover modular and flexible desk mount solutions for dual, triple, and quadruple monitor setups, including part numbers and color options.
	Ergotron HX Wall Monitor Arm User Manual Comprehensive user manual for the Ergotron HX Wall Monitor Arm, detailing installation, adjustments, and safety precautions for mounting monitors.