Ergotron LX Desk Monitor Arm

This document provides instructions for the installation and use of the Ergotron LX Desk Monitor Arm.

Parts Included

The following parts are included in the package:

Clamp Mount
Desk Mount
M4 x 10mm screws
M4 x 10mm screws
2.5mm Allen wrench
M3 x 6mm screw

Tools Needed

Allen wrench (included)

Desk Placement Options

The LX Desk Monitor Arm can be mounted in various positions on a desk. Ensure the mounting surface is stable and strong enough to support the arm and monitor.

Installation Steps

Attach the Clamp Mount: Secure the clamp mount to the edge of your desk. Ensure it is firmly attached. The clamp can accommodate desk thicknesses from 0.4" (10 mm) up to 2.4" (60 mm).
Attach the Desk Mount: Connect the desk mount to the clamp mount.
Mount the Monitor: Attach the monitor to the arm using the provided screws. Ensure the monitor is securely fastened.
Adjust Arm Position: The arm can be rotated for portrait or landscape orientation.
Tilt Adjustment: Adjust the tilt of the monitor for optimal viewing angle. The first-time adjustment may require more force.
Cable Management: Route cables through the designated channels on the arm to keep them tidy.
Adjustment Step: Lift and Lower: Adjust the lift strength to ensure smooth up and down movement of the arm. If the monitor is too heavy or too light, adjust the tension accordingly.
Adjustment Step: Tilt and Swivel: Adjust the tilt and swivel tension for desired movement.
Adjustment Step: Arm Swing: Adjust the arm swing tension for side-to-side movement.

Important Information and Safety

Important: Adjust the product after installation is complete. Ensure all equipment is properly installed before making adjustments. The product should move smoothly and stay in the desired position. If movements are too easy or difficult, follow the adjustment instructions.
Caution: Do not overtighten fasteners. Overtightening may cause damage to your equipment.
Warning: Stored Energy Hazard: The arm mechanism is under tension. Do not remove equipment unless the arm has been moved to the highest position. Failure to follow this instruction may result in serious personal injury and/or equipment damage.
Weight Capacity: Do not exceed the maximum listed weight capacity (7 - 25 lbs / 3.2 - 11.3 kg). Serious injury or property damage may occur.
Cable Slack: Leave enough slack in the cable to allow full range of motion. Follow cable routing instructions to avoid pinching cables, which can cause equipment damage or personal injury.

Ergonomic Information

Learn more about ergonomic computer use at: www.ergotron.com/ergonomics

Contact and Support

For the latest User Installation Guide, Warranty, or Service information, please visit www.ergotron.com. For local customer care phone numbers, visit http://contact.ergotron.com.

When contacting customer service, reference the serial number.

	Ergotron HX Desk Monitor Arm: Installation and User Guide A comprehensive guide for installing and adjusting the Ergotron HX Desk Monitor Arm, featuring Constant Force™ Technology. Includes a parts list, step-by-step assembly instructions, adjustment procedures, safety warnings, and weight capacity information.
	Ergotron LX Multi-Monitor Arm Configurations \| Flexible Desk Mount Solutions Explore Ergotron's LX Multi-Monitor Arm configurations for improved workflow and productivity. Discover modular and flexible desk mount solutions for dual, triple, and quadruple monitor setups, including part numbers and color options.
	Ergotron TRACE Dual Monitor Mount: Dimensional Illustrations and Specifications Detailed dimensional illustrations, specifications, and mounting options for the Ergotron TRACE Dual Monitor Mount, including panel clamp, freestanding clamp, and grommet mount compatibility.
	Ergotron HX Wall Monitor Arm User Manual Comprehensive user manual for the Ergotron HX Wall Monitor Arm, detailing installation, adjustments, and safety precautions for mounting monitors.
	Ergotron 100 Series Flat Panel Monitor Pivots User Guide Comprehensive user guide for the Ergotron 100 Series Flat Panel Monitor Pivots (Vertical Surface, Direct Mount), detailing installation, adjustments, and safety information.
	Ergotron HX Wall Monitor Arm with VHD Pivot Installation and User Guide This document provides comprehensive installation and usage instructions for the Ergotron HX Wall Monitor Arm with VHD Pivot, including safety warnings, mounting guidelines, and adjustment steps.
	Ergotron HX Heavy-Duty Tilt Pivot Installation and Adjustment Guide Comprehensive guide for installing and adjusting the Ergotron HX Heavy-Duty Tilt Pivot, featuring step-by-step instructions, safety precautions, and weight capacity information.
	Ergotron LX Sit-Stand Wall Keyboard Arm Installation and User Guide Comprehensive guide for installing, adjusting, and safely using the Ergotron LX Sit-Stand Wall Keyboard Arm. Includes safety warnings, parts list, step-by-step assembly, and adjustment instructions.