GOOLOO Jump Starter User Manual

Accessories

The package includes the following items:

• 1 x Main Unit (Jump Starter)
• 1 x Smart Jumper Cable
• 1 x Micro USB Cable
• 1 x User Manual
• 1 x Kit Bag

Visual representation of accessories: A small diagram shows the Smart Jumper Cable, the Main Unit (Jump Starter), the Kit Bag, and the Micro USB Cable.

Product Introduction

This section introduces the GOOLOO jump starter unit.

The unit features an Indicator and a Switch. It has several ports: a 5V/2A Input Port, a 5V/2.4A Output Port, and a 5V/1A Output Port. It also includes a Jump Start Socket and an LED Flash Light.

Visual: A diagram of the jump starter unit with labels pointing to the Indicator, Switch, Input Port, Output Ports, Jump Start Socket, and LED Flash Light.

Indicator Lights: The indicator lights show the battery level. Pressing the Power button displays the remaining battery. The lights flash one by one when charging, and solid lights indicate the battery storage level. All lights turn off when charging is paused or completed.

Function Introduction - Battery Indicator:

Note: The table in the original document seems to have a slight overlap in description for the last two rows. The interpretation above aims to clarify the battery percentage indicated by the solid lights.

Recharge the Unit

To recharge the unit:

1. Plug the USB charging cable into any working USB output port.
2. Connect the Micro connector to the GP Warrior host.

Visual: A diagram shows a USB cable connected from a power source to the input port of the jump starter unit.

How To Jump Start Your Vehicle

The GOOLOO GP Warrior is designed for jump starting 12V vehicle batteries.

Step 1: Fully plug the blue connector of the clamp cable into the jump starter socket. Ensure the indicator on the clamp cable is off.

Step 2: Connect the Red Clamp to the positive (+) battery terminal and the Black Clamp to the negative (-) battery terminal.

Visual: A diagram illustrates connecting the red clamp to the positive terminal and the black clamp to the negative terminal of a car battery.

Step 3: Operate according to the Indicator on the clamp cable:

• ? GREEN LIGHT on: Indicates the connection is correct and the circuit is working. You can turn on the engine to jump start directly.
• ? RED LIGHT on with buzzing ?: Indicates the connection is wrong. The unit will buzz to alert you. Correct the clamps as described in Step 2, and wait until the GREEN LIGHT is on before proceeding.
• ? GREEN LIGHT blinking with buzzing ?: Indicates the vehicle battery is low. Press the "BOOST" button. Wait until the GREEN LIGHT becomes solid, then turn on the engine within 30 seconds.
• No Lights on, No buzzing: Indicates the vehicle's battery may be damaged. After confirming the clamps are connected correctly, press the "BOOST" button. Wait until the GREEN LIGHT is on, and then turn on the engine within 30 seconds.

Visual: Diagrams illustrate the different indicator light states (Green On, Red On with Buzzing, Green Blinking with Buzzing) and the "BOOST" button.

Step 4: Start the vehicle.

Visual: A diagram shows a car key being turned in an ignition, labeled "START".

Step 5: When the vehicle is started, remove the clamp cable from the jump starter first, then remove the clamps from your vehicle battery.

Visual: A diagram shows the jump starter unit with the clamp cable being detached, followed by the clamps being removed from the battery terminals.

? CAUTION:

• Occasionally, the jump starter may lock itself down for safety due to: (a) short-circuit; (b) over-current; (c) over-temperature; (d) over/low-voltage; (e) reverse-connection. If this happens, turn off the jump starter, remove the battery clamps, restart the jump starter, and reconnect the clamps to the battery. Try again.
• If the vehicle does not start within 3 seconds, stop starting and wait at least 30 seconds before attempting to restart the vehicle. Do not jump start the vehicle continuously more than four times, as it may damage the unit. Check your vehicle for other possible reasons of not starting.
• During jump starting, avoid the positive and negative battery clamps touching each other. Otherwise, an electric spark will appear, resulting in a safety hazard and damage to the unit by short circuit.
• This unit contains a lithium polymer battery. It is intended for use as an emergency power source and not to replace a car battery. Always comply with transport and safety regulations in the use and disposal of such batteries.

Charge Your Phone or Tablet

You can use the jump starter to charge your mobile devices.

Step 1: Plug the USB cable into the unit's USB output port.

Step 2: Select the appropriate connector and connect it to your mobile phone or tablet.

Step 3: Press the switch button to initiate charging.

Step 4: If charging does not start, please try another USB Cable or USB Output port.

Visual: A diagram shows a USB cable connected from the jump starter's output port to a smartphone.

Use the LED Flash Light

The unit is equipped with an LED flashlight.

• To start the LED flash light: Long press the Power button for 3 seconds.
• To cycle through modes: Short press the Power button. The light modes are torch light, strobe, or SOS, which are switchable.

Visual: A diagram shows the LED flashlight feature on the jump starter unit.

FAQ (Frequently Asked Questions)

Q. How to turn off this appliance?

A. This appliance will shut off automatically when there is no load or when charging is completed.

Q. How to jump start a vehicle with GOOLOO jump starter?

A.

1. Make sure the unit is over 60% charged. If it has not been used for more than two months, please charge it first.
2. Turn on the unit and connect the red clamp to the "+" terminal and the black clamp to the "-" terminal of the car battery.
3. Start the car, unplug the jumper cables from the jump starter within 30 seconds, and then remove the clamps from your car battery.

Q. What should I do if the GOOLOO jump starter cannot be charged?

A. Try charging it with a different charging cable. If it still does not work, please email us via contact@gooloo.uk. (Within the 12-month warranty period, please attach your order ID for confirmation).

Q. What should I do if GOOLOO jump starter cannot charge other devices?

A. Try charging the device again with a different charging cable. If this works, the original cable may be defective. Email us, and we will provide a new cable. If it still does not work, email us via contact@gooloo.uk. (Within the 12-month warranty period, please attach your order ID for confirmation).

Q. How long does the battery last in sleeping mode?

A. The battery can last 6-12 months. However, we suggest recharging it every 3 months.

Trouble Shooting

Attention

Please observe the following precautions:

• ? Recharge at least once every 3 months.
• ? Use original or certified cables.
• ? Do not expose to liquids.
• ? Do not modify or disassemble.
• ⬇️ Avoid dropping.
• ?️ Avoid extreme temperatures.

Warning

Please read the following warnings carefully before using this unit:

• Read the instruction manual carefully before using this unit.
• The product needs to be fixed in place when you keep it in the trunk.
• Do not place the product in any high-intensity magnetic field to avoid damage to its components.
• Before the first use, please charge the jump starter for at least 3 hours.
• Please keep the remaining power above 20%.
• Keep children away from this unit.
• Do not use this unit if any cable clamp or cord is damaged.
• Never use or leave the unit connected to the car battery after cranking the car.
• Make sure the blue plug of the jumper cable is fully plugged into the jump starter socket; otherwise, the blue plug could melt.
• Ensure and check that the battery connections and the battery clamps are well connected before jumping start. If the battery terminals on the vehicle are dirty or corroded, the power of the unit will be lessened.
• Remove the product from the vehicle battery within 30 seconds of jump starting. If not, it could lead to damage.
• Do not operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Remove personal metal items like rings, bracelets, necklaces, etc., when using the product.
• Do not use the unit to jump start a vehicle while charging the internal battery.
• If this unit is leaking liquid, dispose of it at a proper recycling facility immediately. If any liquid is noticed coming from the product, do not handle it with bare hands. If the jump starter appears to be inflating, please stop using it.
• Do not toss it into the trash or your regular recycling bin after use. Please recycle it according to your local environmental rules.

Specification

Warranty & Customer Service

Customer Services

One-year warranty from the date of purchase. If you have any questions or problems regarding the use of the product, please feel free to contact us. Our customer service team is always at your service:

Email: contact@gooloo.uk

Certifications and Compliance:

SGSFCCERoHS

MADE IN CHINA