GOOLOO GP200 Heavy Duty Car Jump Starter

Important Safety Information

Please read carefully before using this unit and keep it in a safe place for future reference.

Toxic and Harmful Substances

Indicates that the content of harmful substances in all homogeneous materials is lower than the prescribed limit of MCV (the standard 2002/95/EC/RoHs).

Warning

• Read the instruction manual carefully before using this unit.
• Jump for 12V vehicles only; it would be hazardous for other vehicles. It is forbidden to use for other machines such as aircraft, ships, and so on.
• Exercise caution while using this unit.
• Do not use this unit if any cable clamp or cord is damaged.
• Do not use in place of a vehicle battery.
• Do not use as a battery charger.
• Do not leave the unit connected to the car battery after successfully cranking the engine.
• Use only the jumper cable provided with this unit.
• Make sure the blue plug of the jumper cable is fully inserted into the jumping socket; otherwise, the blue plug could melt.
• Ensure all battery connections are clean before jump starting and that the battery clamps are well connected. If the battery terminals on the vehicle are dirty or corroded, the unit's power will be lessened.
• Do not attempt to jump start more than 3 times in a row, as this could damage the unit due to overheating. Allow at least two minutes between attempts. The jumper cable can become overheated and detach as a safety measure.
• Remove the product from the vehicle battery within 30 seconds after jump-starting the engine. Failure to do so could lead to damage.
• Do not connect the two clamps together.
• Only attempt to jump start when 3 to 4 indicator lights are illuminated.
• Do not allow use by young or infirm persons without supervision.
• Do not use as a toy.
• Do not allow the product to become wet.
• Do not immerse the product in water.
• Do not operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Do not modify or disassemble the unit. Only a qualified repair technician may repair this unit.
• Do not expose the product to extreme heat or fire.
• Ensure someone is within voice range or close enough to come to your aid when working with batteries.
• Remove personal metal items like rings, bracelets, necklaces, etc., when using the unit.
• Do not drop the unit. If the unit has received a sharp blow or is damaged in any other way, have it checked by a qualified battery technician.
• Do not store in locations where the temperature may exceed 70°C (158°F).
• Charge only at ambient temperatures between 0°C and 60°C (32°F and 140°F).
• Charge only using the charger provided with this unit.
• Do not use the unit to jump start a vehicle while charging its internal battery.
• If this unit is leaking liquid, dispose of it at a proper recycling facility immediately.
• Under extreme conditions, the battery may leak. Do not handle leaking liquid with bare hands. In case of skin contact, wash with soap and water immediately. If the liquid contacts eyes, rinse eyes with cold running water for at least 10 minutes and seek medical treatment.
• At the end of the product's life, dispose of the unit according to local regulations.

Attention Symbols

• Do Not Submerge In Water [?❌]
• Do Not Disassemble [?❌]
• Do Not Dropping [⬇️❌]
• Avoid Extreme Temperatures [?️❌]
• Do Not Place Near or Into Fire [?❌]
• Overcharge/discharge Protection [?️]
• Fuse Protection [⚡]
• Against-reverse Plug [??❌]

Applied Standard: GB/T 18278-2000

Product Layout

The GOOLOO GP200 jump starter unit features the following components:

• LCD Screen: Displays status information.
• LED Light Switch: Controls the LED flashlight modes (Flash, Strobe, SOS Signal).
• Power Switch: Turns the unit on/off and activates displays.
• Charging Indicator: Shows charging status.
• Boost Button: Initiates the jump start sequence.
• Buzzer: Provides audible alerts.
• USB 5V/1A Output: For charging low-power devices.
• 12V/10A Output: For higher-power 12V devices.
• LED Flash Light: Integrated flashlight.
• 15V/1A Input Port: For charging the internal battery of the GP200.
• Jump Start Socket: Connection point for the battery clamps.
• USB 5V/2A Output: For faster charging of compatible devices.

Included accessories typically include a Home Adapter, Car Adapter, and the Jump Cable Clamps (red for positive, black for negative).

Operation Guidance

LCD Display Description

• Power Display: Pressing the power switch turns on the "BATTERY" display, showing the host power percentage (XX%). "100%" indicates full power. "BATTERY LOW RECHARGE" indicates low power and the need to charge.
• Charging: When a power supply is connected (home or car charger), the "CHARGING" indicator and light will show that the unit is charging normally.
• LED Lighting: Pressing the LED Light Switch cycles through three modes: Flash light, Strobe light, and SOS Signal flash.
• Output Specifications: The product has three output specifications: 5V/1A USB, 5V/2A USB, and 12V/10A DC. Choose the appropriate port for your device, connect the cable, and press the power switch.
• Car Boost Display: The GP200 is equipped for car jump starting. Connect the red clamp to "+" and the black clamp to "-" of the vehicle battery.

Notes on Display Messages

• "SHORT CIRCUIT IN JUMPING PORT": Indicates a short circuit in the device. Forbidden to boost. Unplug the battery clamp and send for professional inspection.
• "WARING CLAMPS REVERSED": Indicates incorrect connection between the clamps and the positive/negative battery terminals.
• "BATTERY LOW RECHARGE": Indicates the device's power is too low to boost an engine. Recharge before use.
• "JUMP START READY": Indicates all connections are correct and the boost operation can commence.
• "PRESS BOOST BUTTON": Press the BOOST button to complete the jump start operation within 30 seconds.

How to Charge

1. Charged At Home

1. Plug the home adapter into a general socket.
2. Connect the other end of the home adapter to the 15V/1A input port on the GP200.

2. Charged By Car

1. Plug the car adapter into the vehicle's cigarette lighter socket.
2. Connect the other end of the car adapter to the 15V/1A input port on the GP200.

How to Jump Start a Vehicle

Prerequisites: Ensure the unit is over 60% charged. If it has not been used for more than two months, charge it first.

1. Connect the smart cable plug to the jump starter.
2. Connect the red clamp to the positive (+) terminal of the vehicle battery and the black clamp to the negative (-) terminal.
3. Start the vehicle.
4. Remove the plug from the jump starter within 30 seconds.
5. Remove the clamps from the vehicle battery.

Parts List

Technical Specifications

FAQ (Frequently Asked Questions)

Q1: What cars are GOOLOO GP200 compatible with?

A: Gas engines up to 8L or diesel engines up to 6L.

Q2: How to turn off this device?

A: It will automatically turn off when no charging is done or charging is finished.

Q3: How long can this GP200 be fully charged?

A: Approximately 5 hours via the 15V/1A input.

Q4: What is the lifespan of the GP200?

A: Mostly 3-5 years under normal conditions.

Q5: How long does the battery last after being fully charged?

A: 6-12 months. However, it is suggested to recharge it every three months.

Q6: What should I do if the GOOLOO GP200 cannot start a car?

A: Recharge and fully charged it, try again. Make sure to wait 10 seconds between each jump attempt. If it still not works, email fiona@gooloo.co within 12 months warranty period (Attach your order ID, it is necessary).

Q7: What should I do if the GOOLOO GP200 cannot be charged?

A: Charge it with both a 15V wall charger and car charger, wait for about whole night. If it still not works, email fiona@gooloo.co within 12 months warranty period (Attach your order ID, it is necessary).

Q8: What should I do if GOOLOO GP200 cannot charge other devices?

A: Using a different charging cable to charge again. If it works, the cable might be defective. Email for a new cable. If still not working, email fiona@gooloo.co within 12 months warranty period (Attach your order ID, it is necessary).

Q9: Can the GOOLOO GP200 charge other devices while it is being charged?

A: Yes.

Q10: Can GOOLOO GP200 charge other devices while starting a car?

A: No.

Q11: If there is no response when pressing the switch button of GOOLOO GP200, how can I do?

A: Maybe it is cause by low voltage protection. Plug the adaptor into the 15V/1A input port to activate.

Q12: How long the storage of battery will remain?

A: 6-12 months, however, we suggest to recharge it every 3 months.

Troubleshooting

Warranty Information

• GOOLOO offers a limited warranty for this product against any defects in material and workmanship for a period of 12 months from the purchase date by the end user/consumer.
• The warranty is only valid upon presentation of the original receipt (from dealer/retailer) by the original purchaser with the product to be repaired or replaced.
• The warranty is void if the serial number, date of purchase, or label has been removed or altered.
• The warranty does not cover damage or product failure resulting from normal wear and tear, physical abuse, improper installation, misuse, modification, or repairs by unauthorized third parties.
• GOOLOO does not assume responsibility for any loss or damage incurred during shipment or as a result of a force majeure.
• GOOLOO is not liable for any incidental or consequential damages arising from the use or misuse of this product.
• All warranty claims are limited to repair or replacement of the defective product and are at the sole discretion of GOOLOO.
• If a product is repaired or replaced under warranty, it will be covered for the remaining time of the original warranty period. Repair or replacement may involve the use of reconditioned units which are equivalent in function. Replaced parts or products become the property of GOOLOO.
• Consumable components such as batteries are not covered by the warranty.

Customer Service

• 12-Month Limited Warranty
• Lifetime Technical Service
• Feel Free to Contact Us: fiona@gooloo.co
• For FAQ and More Information: www.gooloobox.com

Follow us:

• @gooloofans
• @+Gooloofans
• @gooloo-tech
• @GoolooOfficial
• @mygooloo
• gooloo